http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김기만(Kim KiMan),남우석(Nam WooSeok),한귀영(Han GuiYoung),서태범(Seo TaeBeom),강용혁(Kang YongHeack) 한국태양에너지학회 2006 한국태양에너지학회 학술대회논문집 Vol.- No.-
Steam reforming of methane using Xe-arc solar simulator was studied for converting solar radiation into energy foam that one can readily utilize. The Xe-arc lamp produce a spectrum similar to that of the sun. Ni-Cr metal foam, resist high temp.(>900℃), is used to catalytically active foam absorber, and to support of reforming catalyst.. The catalyst on the surface of foam were directly irradiated with solar simulated xe-light in order to carry out the steam reforming of methane. The reactor was made of stainless steel and quartz window was located on a place of the xe-light irradiation and temperature was controlled using K-type thermocouple in contact with catalyst located inside the reactor. The result show that a possibility of solar reforming using catalytically active foam absorber is exist.
공공 재정지원과 중소기업 R&D 투자 간 관계에 관한 연구 : 정책효과와 기업개방성의 조절 효과
김기만(Kim, Kiman) 한국산업경제학회 2020 산업경제연구 Vol.33 No.1
정부는 지속적으로 기업의 R&D 활동을 촉진하기 위한 재정지원 정책을 펼치고 있다. 정책효과를 확인하기 위한 실증분석이 축적되고 있으나 아직 명쾌한 결론에 이르지 못했다. 기존 연구는 기업이 받은 정부지원금을 제외하지 않고 R&D 지출을 적용했다는 점에 한계가 있다. 더욱이 최근 연구들은 정책효과 자체를 분석하는 것에서 나아가 정책효과에 영향을 주는 상황적 요인을 밝히기 위해 논의를 확대하고 있다. 이에 본 연구는 국내 제조업 중소기업을 대상으로 총 R&D와 정부지원금을 제외한 순 R&D 투자에 대한 공공 재정지원의 효과를 분석하고, 기업 개방성의 조절 효과를 실증하였다. 중소기업기술통계조사 자료를 바탕으로 한 분석 결과는 다음과 같다. 첫째, 재정지원은 중소기업의 R&D 투자에 정적(+)인 영향을 준다. 둘째, 혁신을 위한 개방성은 정책효과를 높이는 정적(+)인 조절효과를 가진다. 특히 외부기관으로부터 획득한 정보를 우선적으로 활용하는 기업의 경우 이 효과가 뚜렷하다. 이러한 결과는 중소기업 R&D에 대한 정부 재정지원의 정당성을 보여준다. 더욱이 외부지식을 적극적으로 탐색하고 혁신을 위해 우선적으로 활용하는 중소기업의 경우 이러한 정책지원이 더욱 효과적일 수 있음을 시사한다. The government steadily have been implemented fiscal policies to promote firm R&D activities. Empirical analyses have been accumulating to confirm policy effects, but conclusion is not clear-cut. Previous research has limitations in applying R&D investment without considering a volume government funding. Moreover, recent studies have expanded their discussion from analyzing the policy effects themselves to clarify the contextual factors affecting the effects. This study analyzes the effects of public subsidies on SMEs R&D investment considering total R&D and net R&D investment excluding government support, and demonstrates the moderating effect of firm openness. The results based on the survey on Technology of SMEs are as follows. First, public subsidies have a positive impact on SMEs R&D investment. Second, firm openness for innovation is positively moderate the relationship between policy support and SMEs R&D investment. This effect is particularly apparent for SMEs which priorities information from external organizations. These results justify a public subsidies to stimulate SMEs R&D activities. Furthermore, policy supports for SMEs that actively explore external knowledge and use deeply it for innovation, could be more effective.
이산화탄소 배출의 원인 조건으로서 사회경제적 요인, 기술적 요인의 역할에 관한 연구 : 퍼지셋 질적 비교 분석을 활용한 OECD 국가 비교 분석
김기만(Kiman Kim),이수연(Sooyeon Lee) 한국혁신학회 2021 한국혁신학회지 Vol.16 No.1
본 연구는 경제 수준, 에너지 사용, 무역개방도 등 사회경제적 요인과 기술혁신으로 대변되는 기술적 요인에 관심을 두고 국가 수준의 온실가스 배출에 미치는 영향을 분석하였다. 선행연구의 한계를 극복하기 위해 단일 결과에 대한 다양한 원인 조합들 간의 결합적 인과관계를 중요하게 고려하였다. 이를 위해 OECD 국가의 자료를 바탕으로 퍼지셋 질적 비교분석(fsQCA: fuzzy set qualitative comparative analysis)을 실시하였다. 분석 결과, 온실가스 배출의 주요한 원인은 에너지 사용이며, 온실가스 배출이 높은 국가에서 ‘에너지 사용’이 대게 전제되는 조건으로 나타났다. 사회경제적 요인 중 특히 무역개방도의 경우 결합하는 원인 조건에 따라 온실가스 배출에 끼치는 영향이 달라질 수 있음을 확인하였다. 한편, 기술적 요인인 친환경기술혁신은 타 요인들과 결합하여 온실가스 배출을 늘리는 역할을 가지는 것으로 분석되었다. 이는 높은 수준의 친환경기술혁신의 활동이 타 요인들의 환경영향을 상쇄하지 못하거나, 충분하게 확산되지 못하고 결국 부정적인 환경성과로 이어질 수 있는 가능성을 보여준다. 온실가스 배출이라는 사회적 현상을 깊이 있게 이해하기 위해 복잡성과 다양성 관점에서 영향요인의 역할을 이해하고자 원인조건들의 결합의 관점에서 분석을 시도한 점에서 본 연구의 의의가 있다. The study analyzes an impact of economic factor(i.e. economic growth, energy usage, trade openness), technological factor - represented by technological innovation - on carbon dioxide (CO₂) emission at the country level. Based on data from OECD countries, we investigate a causal configurations beyond the exclusive leverage of those factors in order to identify the possible combinations for unifinality using fuzzy-set qualitative comparative analysis (fsQCA). Our findings show that the main condition for CO₂ emission is ‘energy use’, indicating this condition usually exists in high emitter countries. Notably, an impact of ‘international trade openness’ on environmental performance can be varied in accordance with a condition of combinations. Also, our results confirm that an environmental technological innovation as a technological factor by combining with economic factors is positively associated with a high level of CO₂ emission. This could implicate that high levels of technological innovation fails to compensate for the environmental impact of other conditions or sufficiently diffuse into a private market, leading to a negative environmental performance.
델파이 기법을 활용한 국가 온실가스 감축기술 선택 지표 연구
김기만(Kiman Kim),강문정(Moon Jung Kang),김형주(Hyung-ju Kim) 한국기술혁신학회 2018 한국기술혁신학회 학술대회 발표논문집 Vol.2018 No.5
지구온난화의 방지를 위한 국제사회의 노력을 의미하는 신기후체제 합의문 채 택(2015.12) 이후 국가 온실가스 감축목표의 달성을 위한 이행의 중요성이 강조되 고 있다. 특히, 우리나라를 포함한 주요국들과 국제사회는 온실가스 감축 이행에 있어 과학기술의 측면에서 이의 발굴과 적용에 대한 필요성을 강조하고 있는 실 정이다. 감축수단의 확보측면에서 전략적으로 감축기술을 선택하는 것은 국가적 으로 매우 중요한 문제이다. 기술선택은 핵심적으로 활용할 기술에 대한 지식을 확보하고 목적 달성을 위해 중요한 기술을 파악해 나가는 과정으로 이는 수행주 체의 특성에 따라 차별적인 접근이 필요하다. 특히, 공공의 기술선택은 다양한 이 해관계자의 관점을 반영하는 포괄적인 접근의 필요성이 강조된다. 그러나 지금까 지의 온실가스 감축 이행과 관련한 연구들은 기술적, 경제적 요인에 중심을 두고 기술선택을 다루고 있다. 이에, 본 연구는 델파이 기법을 이용하여 국가의 관점에 서 온실가스 감축기술을 선택하는 지표를 개발하고자 하였다. 연구를 통해 도출 된 기술선택 지표를 활용하여 국가의 온실가스 감축기술 선택을 위한 평가가 가 능할 것이며, 이는 국가 온실가스 감축기술의 발굴과 개발에 관한 전략 수립 시 정책적 의사결정에 도움을 줄 것으로 기대한다.
김기만(Kiman Kim),정봉주(Bongju Jeong),유일근(Il-Geon Yoo) 한국SCM학회 2010 한국SCM학회지 Vol.10 No.1
We propose a green cost estimation model based on a green cost classification system to estimate manufacturing cost in manufacturing industry. A recycling and an environmental regulation relevant to green tax is main concern under the green manufacturing circumstance. We also propose a green manufacturing planning model to determine the variables which are inputs for a green cost estimation model. The case of metal industry is analyzed to illustrate our findings. We expect that more appropriate cost estimation and analysis is possible via our models under the current business situation where environmental consciousness has been more emphasizing than ever.