http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
미세튜브 열교환기의 장착을 고려한 구조건전성에 관한 연구
오세윤(Se Yun Oh),김태진(Tae Jin Kim),조종래(Jong Rae Cho),정호승(Ho Sung Jeong) 대한기계학회 2015 大韓機械學會論文集A Vol.39 No.4
본 연구의 목적은 유한요소 해석을 이용하여 항공기 엔진에 장착된 미세 튜브형 열교환기의 작동 하중에 대한 특성을 파악하고 구조안전성을 평가하는 것이다. 작동 하중은 열-기계하중이 고려되었다. 항공기 엔진 부품의 특수성으로 인하여 구조적 강성확보뿐만 아니라 고효율, 저중량, 최소체적을 만족하는 형상 설계가 요구 된다. 브레이징한 미세튜브의 기계적물성치 확보를 위해 고온 인장 실험을 수행하였다. Ansys 12.1의 자체 모델러를 이용하여 형상을 모델링하고 유한요소해석을 수행하였다. 열-구조 연성해석을 통하여 튜브를 제외한 모듈형(modular type) 열교환기에 대한 설계방법을 제시하고 구조적 건전성을 평가하였다. The objective of this study is to predict the structural characteristics of a heat exchanger mounted on an aircraft engine using finite element analysis. The plastic fracture and life of the heat exchanger were estimated by a thermo-mechanical analysis. Tensile tests were conducted under high temperature conditions (700, 800, 900, 1000 K) using five specimens to obtain the mechanical properties of the Inconel 625 tubes. To assess the structural characteristics of the heat exchanger, the full and partial models were applied under the operating conditions given by the thermo-mechanical and inertial load. As a result, the case, tubesheet, flange, and mounting components have a reasonable safety margin to the allowable stress assuming a fatigue strength of Inconel 625 of 10000 cycles under 1000 K.
DMFC에서 온도 및 유량이 성능에 미치는 영향에 관한 연구
김홍건(Kim, Hong-Gun),곽이구(Kwac, Lee-Ku),강영우(Kang, Young-Woo),김태진(Kim, Tae-Jin),곽상희(Kwak, Sang-Hee),안계혁(An, Kay-Hyeok),박경세(Park, Gyung-Se) 한국신재생에너지학회 2009 한국신재생에너지학회 학술대회논문집 Vol.2009 No.06
직접메탄올형 연료전지(Direct Methanol Fuel Cell)는 휴대용으로 사용할 수 있는 소형 전원용으로 주로 개발되고 있으며, 다양한 용도로 사용이 가능하다. 하지만 직접메탄올연료전지에서 전해질로 많이 쓰이는 Nafion막은 이를 통한 메탄올 크로스오버(Crossover) 때문에 연료전지의 성능을 제한시키고 있다. 본 연구에서는 Nafion 117를 사용하여 전극 면적 100cm2 의 DFMC용 MEA를 제작하고, 공기 유량을 3ml/mim으로 고정하고, 메탄올 유량을 2,3 ml/min로 각각 공기극와 연료극에 공급하여 온도변화(50, 60, 70, 80?C)에 따른 성능을 확인하였다. DMFC의 적당 반응 온도는 70?C로 생각되고, 유량은 메탄올 2ml/min, 공기 3ml/min유량 공급시가 성능이 높게 나오는 결과를 얻으나 일정시간 지나면 성능이 메탄올 3ml/min, 공기 3ml/min유량 공급시 보다 성능이 떨어지는 현상이 일어나기 때문에 70?C 반응온도에 메탄올 3ml/min, 공기 3ml/min의 유량 공급이 본 논문에서 최적화된 성능을 내는 조건으로 사료된다.
폐플라스틱 열분해 유화공정 잔류물의 성상분석에 의한 재활용 가능성 평가
채호진(Ho Jin Che),이수출(Soo Chool Lee),박노국(No-Kuk Park),김세정(Se Jeong Kim),김태윤(Tae Yoon Kim),김태진(Taejin Kim) 한국에너지기후변화학회 2019 에너지기후변화학회지 Vol.14 No.2
The purpose of this study is to evaluate the recyclability of carbon-based solids released as residues of the waste plastic low-temperature pyrolysis process. Waste plastic low-temperature pyrolysis process is a process to produce hydrocarbon oil from waste plastic made of polypropylene (PP), polyethylene (PE), polystyrene (PS) among the household wastes by the pyrolysis liquefaction process at 350°C. The final products from the pyrolysis process are pyrolysis oils and carbon-rich solids. In general, the solids are all buried in landfills, which can cause environmental pollution in the long run. Therefore, this study investigated the recyclability of these solid residues by analyzing their element composition. Solid properties were analyzed using TGA, XRD, XRF and SEM. It was found that 30% of the residue discharged from the low-temperature pyrolysis process of waste plastic was composed of carbon, approximately 40% of recyclable hydrocarbons, and about 30% of metal oxides. Metal oxides were found to contain mainly calcium, titanium, iron, and silica etc. Because the residue includes various impurities, the residue itself is somewhat difficult to use as a high value-added recycled raw material, and it may be used as the adsorbents/absorbents for removing heavy metals and trace contaminants. In addition, when a large amount of residue is secured, it respected to can be used as a raw material for producing syngas or recycling oils through gasification or liquefaction.
정영수 ( Jeong Young-soo ),김태진 ( Kim Tae-jin ),임세성 ( Lim Se-seong ),박희준 ( Park Hee-joon ),박세훈 ( Park Se-hoon ) 한국구조물진단유지관리공학회 2023 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.27 No.1
교량 받침장치는 지진시 상하부 구조물 사이를 견고하게 고정하여 교량의 붕괴사고를 방지하는 역할을 한다. 하지만, 2017년 포항지진시 다수의 교량에서 받침장치 무수축몰탈 파손 및 받침장치 자체의 손상 등이 보고되었으며, 무수축몰탈의 손상이 57개소로 대부분의 교량에서 발생하였다. 지진시 교량의 동적거동에 대한 연구는 대부분 실구조물의 거동을 정확히 모사 가능한 상사비를 적용한 축소모형실험을 적용하고 있다. 상사법칙이 적용된 축소모형 받침장치의 거동 특성 및 합리적인 상사비를 도출 하여 실험체의 크기만 축소되는 것이 아니라 상사법칙을 고려한 재료의 형상 및 물성변화가 실험 결과에 미치는 영향에 대한 검토가 필요하다.
인간 자궁내막의 탈락막화에서 HOXA10 유전자의 역할
이창세,박동욱,박찬우,김태진,Lee, Chang-Se,Park, Dong-Wook,Park, Chan-Woo,Kim, Tae-Jin 대한생식의학회 2010 Clinical and Experimental Reproductive Medicine Vol.37 No.3
목 적: Small interfering RNA (siRNA)를 이용하여 homeobox (HOXA) 10 유전자의 발현이 억제된 일차배양 자궁내막 세포를 이용하여 자궁내막 탈락막화 (decidualization)에 HOXA유전자를 포함한 세포 내 신호전달기전을 분석하고자 하였다. 연구방법: 본원 산부인과에서 자궁내막 질환 이외의 이유로 전자궁 적출술을 받은 환자의 자궁내막 조직을 채취한다. $37^{\circ}C$에서 20분간 Trypsin-EDTA를 처리하여 단일세포로 분리한 후 10% fetal bovine serum이 첨가된 DMEM/F12 배지를 이용하여 24시간 동안 $37^{\circ}C$ 5% $CO_2$ 배양기 안에서 배양한다. 배양된 자궁내막 세포를 HOXA10 siRNA로 첨가한 후 TGF-${\beta}1$을 10 ng/mL 농도로 48시간 첨가하여 탈락막화를 유도한다. 배양된 자궁내막 세포에서 reverse transcription polymerase chain reaction을 이용하여 HOXA10, prolactin, cyclooxygenase (COX)-2, peroxisome proliferator-activated receptor (PPAR)-$\gamma$ 및 wingless-type MMTV integration site family (Wnt)의 발현을 관찰하였다. 결 과: HOXA10의 경우 transforming growth factor (TGF)-${\bata}1$과 HOXA10 siRNA를 처리하지 않은 대조군에 비하여 TGF-${\beta}1$을 처리한 군에서 약 1.8배 가량 발현양의 증가를 보였다. 자궁내막 탈락막 표지인자로 알려져 있는 prolactin의 경우 TGF-${\beta}1$을 처리한 경우 대조군에 비하여 유의한 발현의 증가를 보였으며 HOXA10 siRNA를 처리한 군에 있어서는 TGF-${\beta}1$을 첨가하더라도 prolactin mRNA의 발현양의 증가를 관찰할 수 없었다. 또한 자궁내막 세포의 분화인자로 알려져 있는 COX-2의 발현 역시 HOXA10 siRNA를 처리한 군에 있어서 mRNA 발현양이 유의하게 감소하였으며 TGF-${\beta}1$을 처리하여도 발현의 증가를 관찰할 수 없었다. Wnt4의 경우 HOXA10 siRNA를 이용하여 HOXA10의 발현을 억제한 경우 대조군에 비하여 유의하게 mRNA의 발현양이 감소하였으며 이러한 발현양의 감소는 TGF-${\beta}1$을 처리하여도 증가됨을 관찰할 수 없었다. PPAR$\gamma$의 발현은 HOXA10 siRNA의 처리와 관계없이 TGF-${\beta}1$에 의하여 감소하는 것을 관찰할 수 있었다. 결 론: Progesterone에 의하여 자궁내막 상피세포에서 분비되는 것으로 알려져 있는 TGF-${\beta}1$에 의한 자궁내막 기질세포의 분화 (탈락막화)는 HOXA10 및 Wnt에 의하여 조절되는 것으로 생각된다. Objective: This study was performed to clarify the role of HomeoboxA (HOXA) and its related signaling molecules in the decidualization of primary cultured endometrial cells. Methods: Human endometrial tissues were obtained by curettage of hysterectomy specimens from patients with conditions other than endometrial diseases. Tissues were minced and digested with Trypsin-EDTA for 20 min, $37^{\circ}C$. Cells were cultured with DMEM/F12 medium in $37^{\circ}C$, 5% $CO_2$ incubator for 24 hrs. Cells were treated with HOXA10 siRNA and added transforming growth factor (TGF)-${\beta}1$ (10 ng/mL) for 48 hrs to induces decidualization in vitro. Reverse transcription polymerase chain reaction analysis was accomplished to observe the expression of HOXA10, prolactin, cyclooxygenase (COX)-2, peroxisome proliferatoractivated receptor (PPAR)-$\gamma$, and wingless-type MMTV integration site family (Wnt). Results: HOXA10 expression was increased (1.8 fold vs. non-treated control) in TGF-${\beta}1$ treated cells. Decidualization marker, prolactin, was significantly increased in TGF-${\beta}1$ treated cells compared with HOXA10 siRNA treated cells. Endometrial cell differentiation marker, COX-2 was down-regulated by HOXA10 siRNA even if cells were treated with TGF-${\beta}1$. Wnt4 was down-regulated by treated with HOXA10 siRNA, this expression patters was not changed by TGF-${\beta}1$. Expression of PPAR-$\gamma$ was down regulated by TGF-${\beta}1$ in regardless of HOXA10 siRNA treatment. Conclusion: TGF-${\beta}1$ which is induced by progesterone in endometrial epithelial cells may induces stromal cell decidualization via HOXA10 and Wnt signaling cascade.
박세훈,염정훈,최석규,이종현,김진형,이도형,김태진.Se Hoon Park. MD. Jung Hoon Yum. MD. Suk Kyue Choi. MD. Jong Hyun Lee. MD. Jin Hyoung Kim. MD. Do Hyung Lee. MD. PhD. Tae Jin Kim. MD 대한안과학회 2010 대한안과학회지 Vol.51 No.9
Purpose: To evaluate the changes in higher-order aberrations (HOAs) after implantation of an ICL (implantable contact lens). Methods: Twenty-six eyes that had undergone ICL implantation between February 2008 and October 2009 were included. Ocular higher-order aberrations of all the eyes were measured using the Hartmann-Shack aberrometer (KR9000PW). Examinations were performed preoperatively, as well as one week, one month, and three months after ICL implantation. Changes in ocular total higher-order aberrations, total spherical aberration, coma aberration, trefoil aberration, and S3 and S4 calculated in the central 4-mm zone and expressed as root mean square (RMS) values were analyzed. Results: The mean patient age was 25.4 years, and the mean preoperative spherical equivalent was -6.40 diopters(D). The mean postoperative spherical equivalents were 0.00 ± 0.13D, 0.03 ± 0.21D, -0.013 ± 0.12D at one week, one month, and three months, respectively. There were no statistically significant differences in ocular higher-order aberration RMS, including spherical, coma, or trefoil aberration, at one week, one month, or three months postoperative or between preoperative and postoperative measurements. Conclusions: There is no significant change of ocular higher order aberration in the central 4-mm zone after ICL implantation. J Korean Ophthalmol Soc 2010;51(9):1210-1216