http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
질화상압(NPS)법으로 제조한 질화규소의 열충격 저항성 및 내부식성 특성평가
곽길호,김철,한인섭,이기성,Kwak, Kil-Ho,Kim, Chul,Han, In-Sub,Lee, Kee-Sung 한국세라믹학회 2009 한국세라믹학회지 Vol.46 No.5
Thermal shock and hot corrosion resistance of silicon nitride ceramics are investigated in this study. Silicon nitrides are fabricated by nitride pressureless sintering (NPS) process, which process is the continuous process of nitridation reaction of Si metal combined with subsequent pressureless sintering. The results of thermal shock test show it sustains 400MPa of initial strength during test in the designated condition of ${\Delta}T=700{\sim}25^{\circ}C$ up to maximum 4,800 cycles. Hot corrosion tests also reveal that the strength degradation of NPS silicon nitride did not occur at $700^{\circ}C$ with an exposure in Ar, $H_2$, Na and K for 1,275 h.
Practical test of Motor evoked potential
곽길호 대한임상병리사협회 2015 임상생리검사학회 발표자료집 Vol.2015 No.-
배경(Background): Intraoperative monitoring(IOM) 검사 중 Motor evoked potential(MEP) 검사는 신경외과적 수술 외다양한 수술에서 유용하게 사용되고 있으며, 실제 집도의에게 많은 도움을 주고 있다. 이러한 수술 중 MEP 검사를 더욱 유용하게 사용해 보고자 다음과 같은 MEP 검사를 시행해 보았다. 1. Brain tumor 수술에서 tumor 의 위치가 motor cortex 혹은 그 근처에 있는 경우 incision 및 수술 field 로 인해 정확한 위치에 MEP needle 을 위치시키기가 어렵다. 이를 보완하기 위해 strip electrode 를 이용한 Direct cortical MEP(DcMEP) 검사를 시행하여 더욱 정확한 MEP 검사 결과를 얻고자 한다. 2. Facial palsy 를 예방 하고자 기존의 검사방법인 Direct nerve stimulation, free run EMG 이외에 Direct cortical facial MEP (DcfMEP) 검사를 시행해 보았다. 3. MEP 측정시 보다 높은 Amplitude 와 안정적인 재현성을 지닌 검사를 수행해 보고자, Brain tumor 수술에서 Post. tetanic MEP(PtMEP) 검사를 시행해 보았다. 방법(Methods): 1. Craniotomy and dura open 후 1x4 strip electrode를 cortex에 위치 한 후 DcMEP를 시행 하였다. 2. Brain navigation으로 정확한 Facial motor cortex의 위치를 파악하여 1x4 strip electrode를 cortex에 위치 한 후 DcfMEP를 시행 하였다. 3. 말초신경(posterior tibial nerve)에 일정한 자극을 가한 후 TcMEP를 시행 하였다. 결과(Results): 1. DcMEP에서 TcMEP에 비해 높은 Amplitude의 결과를 얻을 수 있었고, TcMEP에서는 나타나지 않은 MEP signal이 DcMEP에서 나타나는 것을 확인 할 수 있었다. 2. Needle electrode를 사용한 Transecranial facial MEP는 생각보다 MEP signal이 나오지 않았고 나오더라도 재현성이 떨어지는 것을 확인했다. 그러나 DcfMEP에서는 재현성이 우수하고 뚜렷한 facial MEP 신호를 확인할 수 있었다. 3. PtMEP 시행시 TcMEP보다 높은 amplitude를 얻을 수 있었지만 만족할 만한 결과를 얻지는 못했다. 하지만 MEP변화가 적어 false positive를 예방하는 case를 얻을 수 있었다. 고찰(Discussion): 위 몇가지 MEP 검사를 수행해본 결과, 수술중 전신마취된 환자의 운동신경을 실시간으로 확인할 수 있는 효과적인 방법이라고 생각된다. 일반적인 MEP만의 수행보다 해당 환자에게 가장 적절한 MEP 검사방법을 수행함으로써 보다 정확하고, IOM 수행의 목적에 맞는 모니터링이 가능할 수 있다고 본다.
이진화된 스트라이드 컨벌루션 신경망 기반의 저 복잡도 저 지연 추론 가속기
곽길호(Gil-Ho Kwak),김태환(Tae-Hwan Kim) 대한전자공학회 2023 대한전자공학회 학술대회 Vol.2023 No.6
In this paper, we present a low-complexity and low-latency inference accelerator based on binary stride convolutional neural networks. The proposed accelerator takes advantage of binarization and stride convolution to achieve high performance with low computational cost and memory usage. Implemented with 2.06K LUTs in a 28nm FPGA, the proposed accelerator exhibits the average inference latency of 6.38ms for the CIFAR10 task. The functionality is verified under the prototype fully-integrated inference system.
채성욱,곽길호,조용일,박광림 한국구조물진단유지관리공학회 2021 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.25 No.2
본 연구에서는 사장교 케이블의 풍진동에 대한 유지관리사례를 분석 및 조치 결과를 제시하였다. 사장교의 내측 최장 케이블에 설치된 가속도센서에서 약 14m/s의 고풍속에서 4g 이상의 가속도 데이터가 계측되는 것으로 확인되었다. 분석결과 고주파 와류진동 특성을 나타내며 케이블의 최대변위는 사용성 기준을 초과하는 것으로 분석되었다. 케이블 정착구에서 타격 소음에 대한 현장점검 결과는 고감쇠 고무 댐퍼가 이탈 및 변형이 확인되어 원위치로 복구 및 교체, 댐퍼 고정 작업을 실시하였으며 교체한 댐퍼에 대한 감쇠 성능은 만족하는 것으로 확인하였다.
노병철,곽길호,박종현,이창노,최규형 한국구조물진단유지관리학회 2012 한국구조물진단학회 학술발표회논문집 Vol.2012 No.1
This study is that larger scale and longer span of construction in concrete structures urge increasing use of mass concrete, high-flowing concrete among them is more widely used for improvement of quality and concrete constructability, but it may cause occurrence of cracks due to autogeneous shrinkage as well as heat of hydration. In this regard, the present study provides comparative analysis on temperature characteristics subject to varied locations through experiments adopting a PSC girder in which high-flowing concrete is used; moreover, it analyzes heat of hydration through the FEM to perform the crack analysis of the PSC girder in such a way that the result thereof is compared with that of the experiment.
심병철,곽길호,이성민,오윤석,김형태,장병국,김성원,Shim, Byung-Chul,Kwak, Kil-Ho,Lee, Sung-Min,Oh, Yoon-Suk,Kim, Hyung-Tae,Jang, Byung-Koog,Kim, Seong-Won 한국분말야금학회 2010 한국분말재료학회지 (KPMI) Vol.17 No.2
Thermal barrier systems have been widely investigated over the past decades, in order to enhance reliability and efficiency of gas turbines at higher temperatures. Yttria-stabilized zirconia (YSZ) is one of the most leading materials as the thermal barriers due to its low thermal conductivity, thermodynamic stability, and thermal compatibility with metal substrates. In this work, rare-earth oxides with pyrochlore phases for thermal barrier systems were investigated. Pyrochlore phases were successfully formed via solid-state reactions started from rare-earth oxide powders. For the heat-treated samples, thermo-physical properties were examined. These rare-oxide oxides showed thermal expansion of $9{\sim}12{\times}10^{-6}/K$ and thermal conductivity of 1.2~2.4 W/mK, which is comparable with the thermal properties of YSZ.
노병철,안광수,곽길호 한국구조물진단유지관리공학회 2013 한국구조물진단유지관리공학회 논문집 Vol.17 No.3
교량의 장대화로 고품질과 양호한 시공성을 갖는 고유동성 매스콘크리트가 프리스트레스 콘크리트 거더에 광범위하게 사용되고 있으나, 수화열과 자기수축에 의한 비구조균열을 종종 발생하고 있다. 대상부재의 콘크리트응력에 대한 다양한 실험과 수치해석을 통하여 평가로부터 메스콘크리트의 수화열 증가에 따라 인장응력 및 균열지수를 예측하였다. 또한 분체계 혼화재료에 의한 자기수축 증가는 정착부 부근 매스콘크리트의 인장응력을 가중시킨다. 수화열과 자기수축 및 건조수축에 의한 인장응력은 PSC 거더의 대부분에서 약간의 응력증가를 나타내나, 정착부 근처의 인장응력은 콘크리트의 재령초기에 인장강도를 초과하게 되어 균열을 유발하게 됨을 알 수 있었다. Recently, mass concrete with high flowability are widely used to improve the quality and constructability in the longer span construction of prestressed concrete bridges, but it may induce nonstructural cracks due to the hydration heat and autogenous shrinkage etc. The stresses in concrete were evaluated by various experiments and numerical analysis. The tensile stress in mass concrete was increased in connection with the accumulation of hydration heat. Moreover, large amount of autogenous shrinkage from powder type admixture could add the tensile stress to mass concrete near anchorage zone. The tensile stresses in anchorage zone by heat and autogenous shrinkage exceeded the tensile strength of early stage of concrete, and small amounts of stress increasement were shown in other parts of PSC girder.
박광림 ( Park Gwang Rim ),곽길호 ( Kwak Kil Ho ),백남철 ( Back Nam Cheol ),조용성 ( Cho Yong Sung ) 한국구조물진단유지관리공학회 2017 한국구조물진단유지관리공학회 학술발표대회 논문집 Vol.21 No.1
There is also a reverse cavity in the back of the domestic subway and railways and roads, which cause a rift in tunnel structures due to stress concentration and strain. As a result, the balsaeng of the tunnel on the back of the tunnel was interpreted as a method to determine the method of a structural structure which greatly affects the stability of the tunnel structure.
Hybrid PVD로 제조된 Ti-Me-N (Me=V, Si 및 Nb) 나노 박막의 미세구조와 마모특성
양영환(Young-hwan Yang),곽길호(Kil-ho Kwak),이성민(Sung-min Lee),김성원(Seong-won Kim),김형태(Hyung-tae Kim),김경자(Kyung-ja Kim),임대순(Dae-soon Lim),오윤석(Yoon-suk Oh) 한국표면공학회 2011 한국표면공학회지 Vol.44 No.3
Ti based nanocomposite films including V, Si and Nb (Ti-Me-N, Me=V, Si and Nb) were fabricated by hybrid physical vapor deposition (PVD) method consisting of unbalanced magnetron (UBM) sputtering and arc ion plating (AIP). The pure Ti target was used for arc ion plating and other metal targets (V, Si and Nb) were used for sputtering process at a gas mixture of Ar/N2 atmosphere. Mostly all of the films were grown with textured TiN (111) plane except the Si doped Ti-Si-N film which has strong (200) peak. The microhardness of each film was measured using the nanoindentation method. The minimum value of removal rate (0.5×10<SUP>?15</SUP> ㎡/N) was found at Nb doped Ti-Nb-N film which was composed of Ti-N and Nb-N nanoparticles with small amount of amorphous phases.