http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Toroidal rotation profile structure in KSTAR L-mode plasmas with mixed heating by NBI and ECH
Shi, Y.J.,Ko, S.H.,Kwon, J.M.,Ko, W.H.,Diamond, P.H.,Yi, S.,Ida, K.,Lee, K.D.,Jeong, J.H.,Seo, S.H.,Hahn, S.H.,Yoon, S.W.,Bae, Y.S.,Terzolo, L.,Yun, G.S.,Bitter, M.,Hill, K. IOP 2016 Nuclear fusion Vol.56 No.1
<P>The structure of the toroidal rotation profile with mixed heating by neutral beam injection (NBI) and electron cyclotron resonance heating (ECH) has been investigated in KSTAR L-mode plasmas. ECH with varying resonance layer positions was used for heating a mix control. The experimental results show that ECH causes a counter-current rotation increment both for off-axis and on-axis ECH heating. For L-mode plasmas, off-axis ECH produces larger counter-current rotation than on-axis ECH. Analysis of ion heat and momentum transport for the ECH L-mode plasmas shows that the electron temperature gradient is the main reason for the degradation of ion heat confinement and also the main driving force for the non-diffusive momentum flux. As a possible mechanism for the counter-current intrinsic torque with ECH, the transition of the turbulence mode from ion temperature gradient (ITG) to the trapped electron mode (TEM) with the resulting sign change of turbulence driven residual stress is suggested. A linear gyro-kinetic analysis shows the ITG → TEM transition occurs in a localized region during ECH injection, and the trend of TEM excitation is consistent with the observed macroscopic trend of the toroidal rotation.</P>
Zhao, K.J.,Nagashima, Y.,Li, F.M.,Shi, Yuejiang,Diamond, P.H.,Dong, J.Q.,Itoh, K.,Itoh, S.-I.,Zhuang, G.,Liu, H.,Chen, Z.P.,Cheng, J.,Nie, L.,Ding, Y.H.,Hu, Q.M.,Chen, Z.Y.,Rao, B.,Cheng, Z.F.,Gao, L. IOP 2017 Nuclear fusion Vol.57 No.12
<P>The temporal-spatial structures of plasma flows and turbulence around tearing mode islands are presented. The experiments were performed using Langmuir probe arrays in the edge plasmas of J-TEXT tokamak. The correlation analyses clearly show that the flows have similar structures of <I>m</I>/<I>n</I> = 3/1 as the magnetic island does (<I>m</I> and <I>n</I> are the poloidal and toroidal mode numbers, respectively). The sign of the potential fluctuations for the flows inverses and the powers significantly reduce at <I>q</I> = 3 surface. Approaching to the last closed flux surface for the magnetic islands, the radially elongated flow structure forms. The flows are concentrated near separatrix and show quadrupole structures. The turbulence is concentrated near X-point and partly trapped inside the magnetic islands.</P>
Li, C.J.,Xu, Z.H.,Dong, Z.X.,Shi, S.L.,Zhang, J.G. Asian Australasian Association of Animal Productio 2016 Animal Bioscience Vol.29 No.8
Whole-crop wheat (Triticum aestivum L.) as forage has been extensively used in the world. In this study, the effects of N application rates on the yields, nutritive value and silage quality were investigated. The N application rates were 0, 75, 150, 225, and 300 kg/ha. The research results indicated that the dry matter yield of whole-crop wheat increased significantly with increasing N rate up to 150 kg/ha, and then leveled off. The crude protein content and in vitro dry matter digestibility of whole-crop wheat increased significantly with increasing N up to 225 kg/ha, while they no longer increased at N 300 kg/ha. On the contrary, the content of various fibers tended to decrease with the increase of N application. The content of lactic acid, acetic acid and propionic acid in silages increased with the increase of N rate (p<0.05). The ammonia-N content of silages with higher N application rates (${\geq}225kg/ha$) was significantly higher than that with lower N application rates (${\leq}150kg/ha$). Whole-crop wheat applied with high levels of N accumulated more nitrate-N. In conclusion, taking account of yields, nutritive value, silage quality and safety, the optimum N application to whole-crop wheat should be about 150 kg/ha at the present experiment conditions.
Flexural behaviour and capacity of composite panels of light gage steel and concrete
L. Shi,Y. Liu,J. L. Dawe,P. Bischoff 국제구조공학회 2009 Steel and Composite Structures, An International J Vol.9 No.5
Eight panel specimens were tested in one-way bending to study the behaviour and capacity of composite slab joists consisting of cold-formed steel C-sections and concrete. Various shear transfer mechanisms were implemented on the C-section flange embedded in the concrete to provide the longitudinal shear resistance. Results showed that all specimens reached serviceability limit state while in elastic range and failure was ductile. Shear transfer achieved for all specimens ranged from 42 to 99% of a full transfer while specimens employed with shear transfer enhancements showed a greater percentage and therefore a higher strength compared with those relying only on surface bond to resist shear. The implementation of pre-drilled holes on the embedded flange of the steel C-section was shown to be most effective. The correlation study between the push-out and panel specimens indicated that the calculated moment capacity based on shear transfer resistance obtained from push-out tests was, on average, 10% lower than the experimental ultimate capacity of the panel specimen.
R&D Status of High-current Accelerators at IFP
J. J. Deng,J. S. Shi,W. P. Xie,L. W. Zhang,K. Z. Zhang,S. P. Feng,J. Li,M. Wang,Y. He,L. S. Xia,Z. Y. Dai,H. T. Li,L. Wen,S. F. Chen,X. Li,Q. G. Lai,M. H. Xia,Y. C. Guan,S. Y. Song,L. Chen 한국물리학회 2011 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.59 No.61
High-current accelerators have many important applications in Z-pinches, high-power microwaves, and free electron lasers, imploding liners and radiography and so on. Research activities on Zpinches, imploding liners, radiography at the Institute of Fluid Physics (IFP) are introduced. Several main high-current accelerators developed and being developed at IFP are described, such as the Linear Induction Accelerator X-Ray Facility Upgrade (LIAXFU, 12 MeV, 2.5 kA, 90 ns), the Dragon-I linear induction accelerator (20 MeV, 2.5 kA, 60 ns), and the Primary Test Stand for Z-pinch (PTS, 10 MA, 120 ns). The design of Dragon-II linear induction accelerator (20 MeV, 2.5 kA, 3 × 60 ns) to be built will be presented briefly.
China Spallation Neutron Source: Accelerator Design Iterations and R&D Status
J. Wei,C.-D. Deng,C.-H. Wang,C.-T. Shi,H. Sun,H.-F. Ouyang,H.-M. Qu,H.-Y. Dong,J. Li,J. Zhang,J.-S. Cao,J.-Y. Tang,L. Dong,L.-L. Wang,Q. Qin,Q.-B. Wang,S. Wang,S.-N. Fu,S.-X Fang,T. -G. Xu,W. Kang,Y.- 한국물리학회 2007 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.50 No.I
The China Spallation Neutron Source (CSNS) is a high-power, accelerator-based project currently under preparation. The accelerator complex consists of an H$^-$ ion source, an H$^-$ linac, a rapid-cycling proton synchrotron, and the transport lines. During the past year, the design of most accelerator systems went through major iterations, and initial research and developments was started on the prototyping of several key components.
Wang, L.,Moon, B.K.,Choi, B.C.,Kim, J.H.,Shi, J.,Jeong, J.H. Ceramurgica ; Elsevier Science Ltd 2016 CERAMICS INTERNATIONAL Vol.42 No.11
Bi<SUP>3+</SUP>, Eu<SUP>3+</SUP> doped CaY<SUB>4</SUB>(SiO<SUB>4</SUB>)<SUB>3</SUB>O phosphors were synthesized through high temperature solid state reaction. Their photoluminescent properties were investigated and site occupation preference of Bi<SUP>3+</SUP> in cationic sites was analyzed. The structure of CaY<SUB>4</SUB>(SiO<SUB>4</SUB>)<SUB>3</SUB>O is characterized by three non-equivalent cationic sites with different coordination and cation-oxygen distances. By means of dielectric theory of the chemical bond for complex crystals, several kinds of chemical bond parameters like fractional covalence of CaY<SUB>4</SUB>(SiO<SUB>4</SUB>)<SUB>3</SUB>O were calculated and integrated to yield environmental factor h<SUB>e</SUB>. According to quantitative equations between the transition energy of Bi<SUP>3+</SUP> and environmental factor h<SUB>e</SUB>, the excitation bands at 308 and 226nm were assigned to <SUP>1</SUP>S<SUB>0</SUB>→<SUP>3</SUP>P<SUB>1</SUB> transition of Bi<SUP>3+</SUP> in Y(6h) and Y(4f) site, respectively. Another excitation band centered at 210nm should be the overlap of Bi<SUP>3+</SUP>A-band in Ca site and C-band in Y(6h) site. Optical band gap of pure CYSO was calculated using Kubelka-Munk method from diffuse reflectance spectra. Red emission can be realized in CaY<SUB>4</SUB>(SiO<SUB>4</SUB>)<SUB>3</SUB>O:Bi<SUP>3+</SUP>, Eu<SUP>3+</SUP> under UV light excitation because of efficient energy transfer from Bi<SUP>3+</SUP> to Eu<SUP>3+</SUP> and decay behaviors of Bi<SUP>3+</SUP> and Eu<SUP>3+</SUP> emission were investigated. Without optimization, the internal quantum efficiency of CYSO:2%Bi<SUP>3+</SUP>, 7%Eu<SUP>3+</SUP> at 310 and 393nm excitations were 31.563%, 74.252%, respectively.