주폐자충 폐렴으로 발현된 Felty 증후군 1예

김성호,남대근,문재현,김지홍,김보석,안진광,문태건,안병재,김성일 全南大醫大 2001 전남의대학술지 Vol.37 No.3

관상동맥 스텐트 시술 후의 재협착에 관한 연구

김윤철,이정우,김보영,강정아,임대승,이민수,김정희,성보영,최성준,성인환,전은석 충남대학교 의과대학 지역사회의학연구소 2000 충남의대잡지 Vol.27 No.1

Coronary stent implacement is known as an effective treatment in the intimal dissection after percutaneous transluminal coronary angioplasty and the prevention of restenosis. However, In-stent restenosis still remains a major concern in clinical stenting. The stents were placed in 103 patients from July 1996 to March 1999 and performed follow-up coronary angiograms in 59(57.3%) patients. To identify the clinical, angiographic and procedurerelated variables 'which predict late restenosis within the stented artery, 59 patients(58.3±9.9, M:F= 41:18) were studied. The clinical characteristics of the patients were stable angina in 23(39.0%), unstable angina in 14(23.7%), acute myocardial infarction in 21(35.6%) and old myocardial infarction in 1(1.7%). Coronary stenting was performed in 1 patient(1.7%) for primary lesion, 50 patients(84.7%) for suboptimal results after PTCA, 6 patients(10.2%) for bail-out procedure, and 2 patients(3.4%) for restenotic lesions. All patients were treated with aspirin and ticlopidinc. The follow-up angiograms were obtained at 7±4 months. The overall in-stent restenosis rate was 27.1%. The coronary angiographic findings were 32 single vessel(54.2%), 19 two vessel(32.2%) and 8 three vessel disease(13.6%). The angiographic morphological characteristics were type A in 33(55.9%), type B in 14(23.7%), type C in 12(20. 3%) cases. Variables of 16 patients with restenosis were compared with those of 43 patients without restenosis. Previously known predictors for in-stent restenosis were multiple stenting, stenting for restenotic lesions, residual stenosis after stenting, stenting for total occlusion lesions, reference diameter, balloon to vessel ratio, acute gain and minimal luminal diameter after procedure, design and characteristics of stents, ostial lesion of aorta, high pressure method for stenting, lesion length, diabetes mellitus, size of artheroma, saphenous vein grafts, ulcerlating lesions and calcified lesions. In this study, Reference diameter before stenting(2.43±0.54mm vs. 2.88±0.65mm, p=0.016) and balloon-to-artery ratio(1.28±0.26 vs. 1.11±0.18, p=0.006) were predictors for in-stent restenosis. 1) The overall in-stent restenosis rate was 27.1%. 2) In the analysis of predictors for in-stent restenosis, there was no significant differences in clinical, angiographic factors between group with restenosis and without restenosis. But, Only reference diameter before stenting and balloon-toartery ratio were predictors of late in-stent restenosis. In conclusion, stenting is effective revascularisation method for selected patients with ischemic heart disease, and to minimize in-stent restenosis rate, stent implanting is achieved in a large vessel on the basis of an artery-to-stnet ration of 1:1, if possible.

한국땅거미 ( Atypus coreanus Kim. 1985 ) 전대그물의 화학적 정량분석

김주필,이영보,장승종,김미애 ( Joo Pil Kim,Young Bo Lee,Seong Jong Jang,Mi Ae Kim ) 한국환경생물학회 1998 환경생물 : 환경생물학회지 Vol.16 No.1

Spiders are easily distinguished from all other creatures by behavior of making webs. Among the web building spiders which depend largely on their webs to predation, Atypidae, four species in Korea, uses the purse web which is the most primitive one than other spider`s web in Korea. To analyze the chemical properties of the purse web, 30 ㎎ of Atypus coreanus` web was collected in Joan-myun, Namyangjoo-city, Kyunggi-do. As a result, the purse web of Atypus coreanus mostly consists of Glycine (5.3%), Glutamic acid (8. 26%) and Alanine (14. 17%). Especially the web of Atypus coreanus has more proportion of serine (9.28%), which plays an important role in intricacy, than that of orb webs used by Nephila clavata(4.84%) and Araneus ventricosus(4.84%).

한국인에서 혈소판 당단백 Ⅱb/Ⅲa 유전자 다형성과 관동맥 성형술 후 재 협착과의 관계

이민수,이정우,김보영,임대승,강정아,김정희,김윤철,성보영,최성준,성인환,전은석 충남대학교 의과대학 지역사회의학연구소 2000 충남의대잡지 Vol.27 No.2

Platelet aggregation is the final pathway of acute coronary syndrome such as acute myocardial infarction and unstable angina. Platelet glycoprotein IIb/IIIa is a membrane receptor for fibrinogen and yon Willebrand factor and it plays an important role in platelet aggregation and in the pathogenesis of acute coronary syndrome. It is known that polymorphism of the gene that encoding platelet glycoprotein IIb/IIIa(PI^A1/A2) is strongly related to acute coronary syndrome in Caucasian, but not in Koreans. We investigated relationship between platelet glycoprotein llb/Illa gene polymorphism and restenosis of coronary artery after angioplasty in Koreans. Total 371 patients(M=251. F=120) were enrolled. Angioplasty group comprised 143 patients who underwent coronary angioplasty, and in the angioplasty group, restenosis group comprised with the 65 patients who had restenotic lesion over 50% of luminal diameter in follow-up coronary angiography. Normal group comprised 153 patients who had no significant angiographic lesion and variant angina group comprised 75 patients who were positive in ergonovine test. Genomic DNA was extracted from peripheral arterial blood. To determine the frequency of P1^A1/A2 genotype, polymerase chain reaction(PCR) was done and the product was restricted with Mspl. 3%. agarrose gel electrophoresis showed restriction fragment length polymorphism. Clinical profile and risk factor were also reviewed. Among all 371 patients of study group, genotype of only one patients in restenosis group if is proven to be PI^A1/A2 heterozygote. All patients of normal study group, no restenosis group, and the other patients in restenosis group have an PI^A1 homozygote genotype. In our study, platelet glycoprotein IIb/Illa polymorphism has no relationship with restenosis of the coronary artery after angioplasty in Koreans. But the genotypic frequency of platelet glycoprotein IIb/IIIa gene polymorphism in Koreans is concordant with that of previous studies.

복수기 역세정 자동화 개발에 관한 연구

김창호,김덕구,오성보 濟州大學校 産業技術硏究所 2000 산업기술연구소논문집 Vol.11 No.2

This paper describes development of an automatic condenser back wash. A condenser of turbine generator plays an important role in increasing of turbine efficiency with condensing to exhaust steam of low pressure turbine. Therefore. we need automatic condenser back wash system to maintain cleanliness of condenser tube. to improve performance by vacuum management. We have developed the program on automatic condenser back wash by distributed control system. It applys the system of condenser remote control at central control room in Bukcheju thermal power plant No.1 unit. Consequently, this automatic condenser back wash system can contribute to improvement of turbine efficiency by remote control of an automatic condenser back wash valve.

주기 변동 부하시 유도 전동기의 속도제어

김덕구,강경보,오성보 제주대학교 산업기술연구소 2000 尖端技術硏究所論文集 Vol.11 No.1

In this paper, we describes the speed control of induction motor by vector control using DSP TMS320F240 that has the remarkable characteristics of motor control. We use a space voltage vector PWM inverter and a PI controller that is stable of transient response characteristics in a speed controller and a current controller of d-axis and q-axis. We try computer simulation about the speed control including clock wise and counter clock wise in induction motor using direct drive system attached the arm on shaft when it works by periodic variation load. So that, we verify the validity of speed control by the experiment.

임플란트 hexagon 높이에 따른 임플란트와 주위 조직의 응력분포 평가

박성재,김주현,김소연,윤미정,고석민,허중보 대한치과보철학회 2012 대한치과보철학회지 Vol.50 No.1

PURPOSE. To analyze the stress distribution of the implant and its supporting structures through 3D finite elements analysis for implants with different hexagon heights and to make the assessment of the mechanical stability and the effect of the elements. MATERIALS AND METHODS. Infinite elements modeling with CAD data was designed. The modeling was done as follows; an external connection type ∅4.0 mm×11.5 mm OsstemUSII (Osstem Co., Pusan, Korea) implant system was used, the implant was planted in the mandibular first molar region with appropriate prosthetic restoration, the hexagon (implant fixture’s external connection) height of 0.0, 0.7, 1.2, and 1.5 mm were applied. ABAQUS 6.4 (ABAQUS, Inc., Providence, USA) was used to calculate the stress value. The force distribution via color distribution on each experimental group’s implant fixture and titanium screw was studied based on the equivalent stress (von Mises stress). The maximum stress level of each element (crown, implant screw, implant fixture, cortical bone and cancellous bone) was compared. RESULTS. The hexagonal height of the implant with external connection had an influence on the stress distribution of the fixture, screw and upper prosthesis and the surrounding supporting bone. As the hexagon height increased, the stress was well distributed and there was a decrease in the maximum stress value. If the height of the hexagon reached over 1.2 mm, there was no significant influence on the stress distribution. CONCLUSION. For implants with external connections, a hexagon is vital for stress distribution. As the height of the hexagon increased, the more effective stress distribution was observed. 연구 목적: 본 연구는 hexagon 높이에 따른 임플란트 각 부위와 주위 지지조직의 응력분포를 3차원 유한요소 해석을 통해 평가하여 hexagon 높이가 기계적 안정성에 미치는 영향을 평가하고자 시행되었다. 연구 재료 및 방법: 외측 연결 형태의∅L4.0 mm×11.5 mm USII (Osstem Co., Pusan, Korea) 임플란트 시스템을 이용하여 하악 제 1대구치 부위에 임플란트를 식립하여 보철 수복한 경우를 연구 모델로 가정하고 임플란트 고정체의 외측 연결부인 hexagon의 높이를 각각 0.0 mm, 0.7 mm, 1.2 mm, 1.5 mm로 적용한 CAD data를 유한요소 모형화하였다. ABAQUS 6.4 (ABAQUS Inc., Providence, RI, USA)를 이용하여 산출된 응력 값 중에서 등가응력을 기준으로 각 요소(상부 치관, 지대주 나사, 고정체, 치밀골, 해면골)에서 나타나는 최대 응력 값을 비교 하였다. 결과:외측 연결을 갖는 임플란트의 hexagon의 높이는 고정체, 지대주 나사, 상부 보철물 그리고 주위 지지골에 대해 응력 분산에 영향을 주었다. Hexagon의 높이가 증가할 수록 임플란트의 응력 분산은 더 잘 이루어졌으며, 최대 응력 값의 감소를 보였다. Hexagon의 높이가 1.2 mm 이상이 되면 응력 분포에 더 이상 크게 기여하지 않았다. 결론: 외측연결을 갖는 임플란트에서 hexagon은 응력 분산에 필수적인 요소이며 그 높이가 증가할수록 더욱 효과적인 응력의 분산이 나타났다.

학교교실의 조명설계 최적화 연구

좌승택,김덕구,오성보 제주대학교 산업기술연구소 2000 尖端技術硏究所論文集 Vol.11 No.2

School illumination with full volume of light and adequate brightness is designed to help students better focus on their education and produce an optimum atmosphere where students can apply their utmost to learning. This paper presents study on actual illumination environment of schools in order to figure out illumination problems. Furthermore, it attempts to suggest an optimum design for schoolroom illumination through computer simulation. We try to attain qualitative improvement effect in school illumination under the illuminaion plan which is based on illumination maintenance and uniformity ratio that K.S. illumination standard sets.

우리나라 社會福祉政策에 관한 연구

金令才,洪性寶 군산대학교 지역개발연구소 1992 地域開發硏究 Vol.4 No.-

주기 변동 부하시 유도 전동기의 속도제어

김덕구,강경보,오성보 濟州大學校 産業技術硏究所 2000 산업기술연구소논문집 Vol.11 No.1

In this paper. we describes the speed control of induction motor by vector control using DSP TMS320F240 that has the remarkable characteristics of motor control. We use a space voltage vector PWM inverter and a PI controller that is stable of transient response characteristics in a speed controller and a current controller of d-axis and q-axis. We try computer simulation about the speed control including clock wise and counter clock wise in induction motor using direct drive system attached the arm on shaft when it works by periodic variation load. So that. we verify the validity of speed control by the experiment.