http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
폐색성 무정자증환자의 치료로써 미세적 부고환 정자흡입술(MESA) 및 정자직접주입법(ICSI)의 효과
김현주,김영찬,엄기붕,오종훈,이우식,한세열,최동희,윤태기,차광열,Kim, H.J.,Kim, Y.C.,Oum, K.B.,Oh, J.H.,Lee, W.S.,Han, S.Y.,Choi, D.H.,Yoon, T.K.,Cha, K.Y. 대한생식의학회 1995 Clinical and Experimental Reproductive Medicine Vol.22 No.2
To present and assess the efficacy of combination of microsurgical epididymal sperm aspiration(MESA) and intracytoplasmic sperm injection(ICSI) for the treatment of infertility due to unreconstructable obstructive azoospermia or congenital bilateral agenesis of vas deferens (CBAVD), MESA was performed in the 45 husbands ( 16 CBAVD, 29 unreconstructable genital tract obstruction), followed by ICSI of oocytes recovered from the wives hyperstimulated by GnRH agonist in combination with hMG and FSH. Cleaving embryos were transfered to the uterine cavity or follopian tube(ZIFT) 18 or 24 hours after ICSI procedure. In 45 cycles of MESA, 492 oocyte complexes were recovered. ICSI was carried out on 355 metaphase II oocytes and 226 oocytes (63.7%) showed normal two pronucleus fertilization. After 198 embryos were transferred in 43 cycles, an average of 5 per cycle, 20 patients presented a positive HCG and intrauterine pregnancy was confirmed by US. So, the clinical ongoing pregnancy rate per transfer was 46.5%. Until now, 8 patients have given birth to 9 babies, 5 male and 4 female, including 1 twin. The babies were all healthy except 1 twin female baby. There was 1 miscarriage at 7 weeks and chromosomal study of abortus revealed as 45X, monosomy. These results suggested that it was possible to achieve high normal fertilization and pregnancy rate by ICSI using epididymal sperm.
김현주,최중용,오아름,지형근,Kim, H.J.,Choi, J.Y.,Oh, A.R.,Jee, H.K. 한국전자통신연구원 2022 전자통신동향분석 Vol.37 No.3
As the COVID-19 pandemic has decreased face-to-face communication in everyday life, our interest in cultural communication via virtual world has grown significantly. In particular, the demand for applications that use three-dimensional (3D) data generation technology such as virtual reality, augmented reality, virtual performances, and realistic content is rapidly increasing in the entertainment and gaming industries. Additionally, improved computing capacity has increased the demand for high-resolution data. This study investigates the trends in 3D scanning and photogrammetry technologies that can support high-quality 3D data generation and introduces the high-resolution 3D data generation technology developed and reported in ETRI.
김현주,이광훈,문성훈,Kim, Hyeonju,Lee, Gwang H.,Moon, Seonghoon 대한자원환경지질학회 2015 자원환경지질 Vol.48 No.2
확장 탄성 임피던스(extended elastic impedance, EEI)는 입사각에 따른 음향 임피던스(acoustic impedance, AI) 를 일반화한 탄성 임피던스(elastic impedance, EI)를 확장한 개념으로서 다양한 저류암 물성과 대비가 가능한 것으로 알려져 있다. 하지만 EEI 역산을 적용하여 예측한 저류암적 물성이 실제 물성을 얼마나 정확히 예측하는지를 검증한 사례는 거의 없다. 본 연구에서는 EEI 역산 기법을 이용하여 미국 와이오밍주 Teapot Dome 유전의 주요 저류층 중 하나인 Second Wall Creek 사암층의 P파속도($V_p$), S파속도($V_s$), P파속도-S파속도 비($V_p/V_s$), 포아송비(Poisson's ratio)와 같은 속도 물성들을 유추하고 실제 물리검층 자료와 비교하여 EEI 역산 기법의 정확도를 검증했다. 사용된 자료는 Teapot Dome 유전 남부의 3차원 공심점 모음 자료(CDP gather)와 많은 시추공에서 선택된 4개의 시추공 자료이다. $V_s$ 검층자료는 경험식을 통해 $V_p$ 검층자료로부터 계산되었다. 4개의 속도 물성 EEI 예측 %에러는 한 시추공에서의 포아송비를 제외하면 약 5%를 넘지 않는다. 그러나 속도로부터 직접적으로 계산되지 않는 공극률, 감마선 검층값, 밀도와 같은 물성들은 시추공에서의 EEI 역산 분석 결과가 만족스럽지 못하여 전체 자료에 EEI 역산을 적용할 수 없었다. 따라서 속도 물성의 경우 EEI 역산을 적용할 수 있지만 속도로부터 직접 계산이 되지 않는 물성의 경우는 EEI 역산 적용에 신중해야 할 것으로 판단된다. Extended elastic impedance (EEI) is an extension of elastic impedance (EI) which is a generalization of acoustic impedance (AI) for nonzero angles of incidence and can be tuned to be proportional to reservoir properties. In this study, we evaluated EEI inversion by estimating the P-($V_p$) and S-wave velocities ($V_s$), P-wave to S-wave velocity ratio ($V_p/V_s$), and Poisson's ratio of the Second Wall Creek Sand of the Teapot Dome field, Wyoming, USA. We also applied the EEI inversion technique to estimate porosity, gamma-ray values, and density of the Second Wall Creek Sand. Data used in the study include 3-D pre-stack seismic data from the southern part of the field and four wells, selected from a large well database. The $V_s$ logs at the wells were constructed from the $V_p$ logs using the empirical relationships. The percent prediction errors for the four velocity properties are less than about 5% except for Poisson's ratio at one well, supporting that the EEI inversion can be used in the prediction of rock properties. However, the results from the EEI inversion analysis of porosity, gamma-ray values, and density at the wells were unsatisfactory and thus these properties, which are not directly computed from velocities, may not be suitable for EEI inversion.
230㎸급 Composite Bushing Type Test 완료
김현주(H. J. Kim),김한화(H. H. Kim),이춘미(C. M. Lee),한두현(D. H. Han),김덕환(D. H. Kim) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.11
애관의 절연 재료에는 Porcelain과 Polymer가 있다. 약 100년 전부터 Porcelain Bushing이 사용되어져 왔으며 그 성능 면에서 신뢰성을 얻고 있다. 그러나 Porcelain Bushing은 무겁고, 부서지기 쉽고, 오염에 의한 전기적 성능의 저하로 유지보수의 필요성 등 단점도 가지고 있다. 이들의 단점을 극복한 Composite Bushing은 가벼워 취급이 용이하고 내오손성과 발수성이 뛰어나 유지보수가 필요하지 않으며 내진성이 뛰어나고 파괴로 인한 2차적인 피해가 거의 없다. 세계적으로 Composite Bushing의 사용이 급격히 증가하고 있다. 당사는 Composite Bushing을 개발하여 IEC61462에 의한 한국전기연구원(KERI) 인증을 완료하였으며, 국내에서는 당사가 최초로 230㎸급 Composite Bushing 개발을 완료하였다.
김화종(H. J Kim),김현주(H. J. Kim),김성용(S. Y. Kim),송재혁(J. H. Song),한지훈(J. H. Han),이호림(H. L. Lee),김덕환(D. H. Kim) 대한전기학회 2006 대한전기학회 학술대회 논문집 Vol.2006 No.7
현재 전세계적으로 170㎸급 이하의 초고압 지중케이블 접속함으로 기존의 현장몰드방식의 TMJ(Tape Molded Joint)와 부풍조립망식의 PJ(Prefabricated Joint)보다 조립시간이 짧고 작업자의 숙련도가 높지 않아 경제적이며, 유지보수에 장점을 가진 고무몰드 접속함(PMJ)이 채용되고 있으며, 이러한 추세는 적용 전압급이 점차 상승하면서 230㎸급까지 그 비중이 늘어나고 있는 경향을 보이고 있다. 당사에서는 이러한 추세에 발맞추어 154㎸급 고 무몰드접속함의 개발 당시의 Silicone의 기초물성시험 DATA 획득, 고무볼드 UNIT 및 금형 설계 기술 확립과 접속 공법 개발의 경험 을 바탕으로 230㎸급 고무몰드접속함의 개발에 성공하였다.
500㎸ 1Cx2500㎟ XLPE Cable 접속재 개발
김현주(H.J. Kim),박정기(J.K. Park),김진석(J.S. Kim),소재용(J.Y. So),김덕환(D.H. Kim) 대한전기학회 2010 대한전기학회 학술대회 논문집 Vol.2010 No.11
초고압 XLPE 케이블은 방재의 기능 및 유지보수의 용이성으로 인하여 수요가 꾸준히 증대되어 왔으며 현재 세계적으로 500㎸ 초고압케이블 시스템이 상용화 되었으며 당사 또한 500㎸ 1Cx2500㎟ XLPE 케이블 접속재 개발 및 국제인증기관인 KEMA 입회하의 Type Test를 완료하였다. 현재 초고압 케이블로서 최대 전압등급인 본 접속재 개발을 완료함으로써 초고압 접속재에 관한 모든 전압등급의 접속재를 보유하게 되었다. 특히 EB-A(기중 종단접속함), EB-G(가스중 종단접속함)는 Slip-on Type을 적용함으로써 단순한 내부절연구조에서 비롯되는 전기적특성의 안정성과 신속한 시공성을 확보하게 되었으며, 직선접속함은 1Piece형 PMJ(Premolded Joint)를 적용하여 시공의 신속성을 확보하게 되었다. 본고에서는 500㎸급 접속재인 기중 종단접속함(EB-A), 가스중 종단접속함(EB-G), 직선접속함(PMJ)의 설계, 개발시험 및 국제인증기관입회하의 Type Test에 관하여 소개하고자 한다.
표층수온도 변화에 따른 R717용 해양온도차발전 사이클의 성능 비교
김현욱(H.U.Kim),윤정인(J.I.Yoon),백승문(S.M.Baek),손창효(C.H.Son),김현주(H.J.Kim),이호생(H.S.Lee) 한국해양환경·에너지학회 2012 한국해양환경·에너지학회 학술대회논문집 Vol.2012 No.11
해양온도차발전 사이클 증발기에 유입되는 표층수 온도로 화력발전소에서 버려지는 35℃의 온배수를 이용하는 경우와 25℃의 해양 표층수를 이용하는 경우의 사이클 특성을 서로 비교한 후, 해양온도차 발전 사이클에 화력발전소에서 버려지는 온배수를 해양온도차발전 사이클에 적용 가능한 지를 확인한다. 주요 결과를 요약하면 다음과 같다. 화력발전소에 배출되는 35℃의 온배수를 표층수로 사용한 해양온도차발전 사이클의 효율이 25℃의 표층수를 적용한 해양온도차발전 사이클에 비해 89% 이상 높게 나타났다. 따라서 화력발전소의 온배수를 해양온도차발전 사이클에 적용할 수 있음을 확인할 수 있었다. This study was performed to find out the possibility that hot waste water from a thermoelectric power plant can be applied to OTEC power cycle by comparing the performance characteristics for use of the ocean surface water (25℃) and hot waste water (35℃). Main results of this study are summarized as follows : Overall efficiency of applying hot waste water (35℃) to OTEC is 89% higher than that of surface water (25℃). Thus it could be confirmed that hot waste water of the thermoelectric power plant can be applied to OTEC.
김현욱(H.U.Kim),윤정인(J.I.Yoon),최광환(K.H.Choi),손창효(C.H.Son),백승문(S.M.Baek),김현주(H.J.Kim),이호생(H.S.Lee) 한국태양에너지학회 2012 한국태양에너지학회 학술대회논문집 Vol.2012 No.11
In this paper, the performance analysis for condensation and evaporation capacity, total work and efficiency of 20kW ocean thermal energy conversion system using R744(CO2) is presented to offer the basic design data for the operating parameters of the system. The operating parameters considered in this study include evaporation and condensation temperature, pump and turbine efficiency. The main results were summarized as follows : when the condensation temperature is increased, the amount of heat of condensation and evaporation are increased. And when the condensation temperature is 15℃, total work and efficiency of system are reduced to 5% and 65% respectively, compared with the condensation temperature of 5℃. It is verified through this study that, in order to increase the efficiency of the system, condensation degree should be reduced and the degree of evaporation, increased.