http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
근에너지 기법과 스트레칭 기법의 발목관절 적용이 발등굽힘 제한이 있는 만성 뇌졸중 환자의 발목 관절가동범위, 균형 능력, 보행 능력에 미치는 영향 비교
허태현,김선엽 대한물리의학회 2024 대한물리의학회지 Vol.19 No.1
PURPOSE: This study compared the effect of the muscle energy technique (MET) and stretching technique on ankle dorsiflexion passive range of motion, balance, and gait ability of stroke patients with limited ankle dorsiflexion. METHODS: Forty-four post-stroke patients participated. The participants were randomized into the MET group (METG; n = 22) and the stretching group (STG; n = 22). The METG was subjected to the MET to relax the dorsiflexion, while the STG was subjected to the dorsiflexion stretching technique. Both groups completed standard neurological physical therapy for 30 min per session. The intervention was conducted five times a week over 3 weeks for a total of 15 times. All participants underwent ankle dorsiflexion passive range of motion measurement and Berg Balance Scale score determination and completed a 10-m walking test and the timed up and go test before and after the intervention. RESULTS: After the 3-week intervention, both groups showed significant improvement after the intervention (p < .05). METG participants showed greater improvements in ankle dorsiflexion passive range of motion and 10-m walking test results compared to STG participants (p < .05). CONCLUSION: Both interventions improved ankle dorsiflexion passive range of motion, balance, and gait ability in stroke patients with limited ankle dorsiflexion. Moreover, the MET was superior to ankle dorsiflexion passive range of motion on the 10-m walking test.
윤활유의 수분혼입 및 베어링강의 표면 조도가 구름접촉 피로수명에 미치는 효과
허태현 ( Tae Hyeon Heo ),심충기 ( Chung-ki Sim ),김홍석 ( Hong Seok Kim ),신기훈 ( Ki-hoon Shin ),정성균 ( Seong Kyun Cheong ) 한국안전학회(구 한국산업안전학회) 2017 한국안전학회지 Vol.32 No.1
A large amount of research has been performed on the rolling contact fatigue(RCF) life of bearings, since it directly affects the safety and reliability of mechanical systems. It is well known that rolling contact fatigue life is influenced by several parameters including contact pressure, oil contamination by water or metal particles, and the surface conditions of bearings. However, the detailed damage mechanisms involved in rolling contact fatigue have not been clearly identified yet. In this paper the effects of water contamination of the lubricant and surface roughness of bearing steel on the rolling contact fatigue life were investigated. Two types of specimens with different surface roughness values were prepared through turning and lapping operations. They were tested under two different lubrication conditions, i.e. oil lubricant with 100% of oil and the water contaminated condition with 80% of oil and 20% of water using the rolling contact fatigue testing machine. The surface damage induced by the rolling contact fatigue was observed by using atomic force microscope(AFM). Experimental results show that the rolling contact fatigue life, L<sub>10</sub> was reduced by 24 to 33% depending on the lubrication condition. The reduction of fatigue life in the range of 53 to 57% was also observed at different surface roughness conditions.
파종시기에 따른 미백2호 찰옥수수 품종의 생육 및 이삭 특성 변화
허태현 ( Heo T. H. ),최여진 ( Y. J. Choi ),사승진 ( S. J. Sa ),강호원 ( H. W. Kang ),김서영 ( S. Y. Kim ),이현빈 ( H. B. Lee ),박상익 ( S. I. Park ),이종범 ( J. B. Lee ),이재이 ( J. Lee ),이주경 ( J. K. Lee ) 강원대학교 농업생명과학연구원(구 농업과학연구소) 2017 강원 농업생명환경연구 Vol.29 No.3
본 연구는 파종시기에 따른 미백2호 찰옥수수 품종의 생육 특성 변화를 관찰하기 위하여 4월 중순부터 5월 중순까지 2주 간격으로 3회 종자를 분산 파종한 후 각 처리구별로 개체들에 대한 생육특성을 조사하였다. 출아일수의 경우 1차 파종(4월 19일)에서는 파종 후 12일째인 5월 1일에 50% 이상의 개체들이 출아를 하였으며, 2차 파종(5월 10일)에서는 파종 후 7일째인 5월 17일에 50% 이상의 개체들이 출아를 하였고, 3차 파종(5월 24일)에서는 파종 후 6일째인 5월 30일에 50% 이상의 개체들이 출아를 하였다. 옥수수 수염의 출사기는 4월 19일에 파종한 1차 처리구에서는 6월 29일에 50% 이상의 개체들이 출사를 하였으며, 5월 10일에 파종한 2차 처리구에서는 7월 14일에 50% 이상의 개체들이 출사를 하였으며, 그리고 5월 24일에 파종한 3차 처리구에서는 7월 27일에 50% 이상의 개체들이 출사를 하였다. 초장의 경우 1차 파종 처리구에서는 최소 185 cm에서 최대 210 cm로 평균 200 cm를 나타내었고, 2차 파종 처리구는 최소 196 cm에서 최대 233 cm로 평균 212 cm를 나타내었고, 그리고 3차 파종 처리에서는 최소 215 cm에서 최대 241cm로 평균 232 cm를 나타내었다. 이삭장의 경우 1차 처리구에서는 평균 20 cm를 2차 처리구에서는 평균 19.6 cm, 그리고 3차 처리구에서는 평균 19 cm를 각각 나타내었다. 백립중의 경우는 1차 처리구에서 평균 36.4 g을 2차 처리구에서 평균 35.3 g을 그리고 3차 처리구에서 평균 35.0 g을 각각 나타내었다. 이상의 결과에 의하면 종실 수량과 관련된 형질들의 경우는 가급적 파종시기를 빨리하여 생육기간을 충분히 확보해 주는 것이 옥수수 이삭의 생산성에 더 유리한 것으로 나타났다. In order to observe the effects of sowing date on the ‘Mibaek 2’ waxy corn cultivar, we investigated the morphological traits of individuals under early, mid, and late sowing conditions. The budding of early (April 19th), mid (May 10th), and late (May 24th) sown plants was observed at 12 d, 7 d, and 6 d after sowing, respectively. The silking of early, mid, and late sown plants was observed on June 29th, July 14th, and July 27th, respectively. Most of the early-sown plants had an average height of 200 cm, with a minimum of 185 cm and a maximum of 210 cm, while mid-sown plants had a mean height of 212 cm with a minimum of 196 cm and a maximum of 233 cm. The average height of late-sown plants was 232 cm, with a minimum of 215 cm and a maximum of 241 cm. The longest ear length and the highest value of 100-kernel weight were observed in early-sown plants compared to mid-and late-sown plants. Our findings suggest that it is more advantageous to sow the ‘Mibaek 2’ waxy corn cultivar as early as possible to obtain the highest productivity.