BaTiO3/SiO2 로 구성된 아티퓨즈의 전기적 특성

이영민,이재성,이용현 ( Young Min Lee,Jae Sung Lee,Yong Hyun Lee ) 한국센서학회 1998 센서학회지 Vol.7 No.5

A novel antifuse has been developed for field programmable gate arrays (FPGA`s) as a voltage programmable link with Al/BaTiO₃/SiO₂/TiW-silicide. The proper program voltage can be obtained by adjusting the deposition thickness of BaTiO₃ film. When a negative voltage was applied at bottom TiW-silicide electrode of the antifuse, based on BaTiO₃(120Å)/SiO₂(120Å), the program voltage was about 14.4V and on-resistances were ranged between 40 and 50Ω. The current-voltage characteristics of antifuses are consistent with a Frenkel-Poole conduction model. However, there are some deviations depending on bias polarity that are probably due to the difference in the interface properties between Al/BaTiO₃ and TiW-silicide/SiO₂.

발아녹미와 노루궁뎅이 버섯 균사체를 이용한 생물전환 약용 신소재의 항산화 활성 및 NO 생성 억제 효능

이영민,김인숙,미툰 고쉬,홍성민,이택환,이동희,임병우,Lee, Young Min,Kim, In Sook,Ghosh, Mithun,Hong, Seong Min,Lee, Taek Hwan,Lee, Dong Hee,Lim, Beong Ou 한국약용작물학회 2017 한국약용작물학회지 Vol.25 No.5

Background: Hericium erinaceus is considered a functional food and potential medicinal source. The present study was conducted to examine the potential antioxidant and anti-inflammatory activities of carried out with water and ethanol extracts of Hericium erinaceus grown on germinated green rice (HEGR-W and HEGR-E, respectively) and the water and ethanol extracts of germinated green rice (GR-W and GR-E, respectively) as potential medicinal resources or antioxidant and anti-inflammatory agents. Methods and Results: The total phenolic and flavonoid contents, DPPH, and ABTS activity, reducing power, DNA protective activity, cell viability, and NO production were investigated. The total phenolic and flavonoid contents were highest in HEGR-E ($66.53{\pm}2.40 mg{\cdot}GAE/100g$ and $82.12{\pm}7.10mg{\cdot}CE/100g$ respectively). HEGR-E exhibited high DPPH ($44.70{\pm}1.28%$) and, ABTS ($44.70{\pm}1.28%$) activity and reducing power (0.219). HEGR and GR extracts showed protective activity against DNA damage. The cytotoxicity of HEGR and GR in RAW264.7 cells and LPS-induced RAW264.7 cells was low. HEGR-E and GR-W exhibited anti-inflammatory effects through a 28% inhibition of NO production in LPS-induced RAW264.7 cells. Conclusions: These results suggested that the extracts of Hericium erinaceus grown on germinated green rice could be a potential medicinal material with natural antioxidant and NO inhibitory properties.

딥러닝 네트워크 축소

이성준(SungJun Lee),김경태(KyoungTae Kim),서기성(Kisung Seo) 대한전기학회 2019 대한전기학회 학술대회 논문집 Vol.2019 No.7

회원작품 - 야곱의 우물

이영민,Lee, Youngmin 대한건축사협회 2017 建築士 Vol.580 No.-

병렬처리 기법을 이용한 소형 무인비행체용 통합 시현 소프트웨어 플랫폼 개발

이영민,황인소,임배현,문용호,Lee, Young-Min,Hwang, In-So,Lim, Bae-Hyeon,Moon, Yong-Ho 대한임베디드공학회 2016 대한임베디드공학회논문지 Vol.11 No.1

An integrated display software platform for small UAV is developed based on parallel processing technique in this paper. When the small UAV with high-performance camera and avionic modules is employed to various surveillance-related missions, it is important to reduce the operator's workload and increase the monitoring efficiency. For this purpose, it is needed to develop an efficient monitoring software enable to manipulate the image and flight data obtained during flight within the given processing time and display them simultaneously. In this paper, we set up requirements and suggest the architecture for the software platform. The integrated software platform is implemented with parallel processing scheme. Based on AR drone, we verified that the various data are concurrently displayed by the suggest software platform.

오픈소스 소프트웨어의 선정 절차에 관한 연구

이영민,류성열,김종배,Lee, Young-Min,Rhew, Sung-Yul,Kim, Jong-Bae 한국정보처리학회 2008 정보처리학회논문지D Vol.15 No.6

소프트웨어의 품질, 개발 속도 및 비용 등 기존 소프트웨어 개발의 한계점을 해결하기 위한 새로운 대안으로써 오픈소스 소프트웨어를 활용한 개발 방법이 시도되고 있다. 특히, 중소기업들이 소프트웨어를 개발할 경우 대규모 개발 방법론 적용에 어려움을 겪고 있어 소규모 개발 방법에 대한 요구가 증가하고 있는 상황에서, 오픈소스를 활용한 소프트웨어 개발 방식은 비용을 절감하고 개발 기간을 단축시킬 수 있는 효율적인 방법이 될 수 있다. 이에 따라, 오픈소스 소프트웨어에 대한 다양한 분석들이 이루어졌지만 아직까지 산업현장에서 소프트웨어 개발에 오픈소스를 활용하기 위한 구체적인 절차나 방법이 없다. 본 연구에서는 이러한 문제들을 해결하기 위해 기존 연구에 대한 종합과 개발 프로젝트의 경험을 토대로 하여, 오픈소스의 식별과 선정을 위한 효과적인 절차와 방법을 제시하였다. 오픈소스 소프트웨어 선정을 위해서는 개발될 소프트웨어에 대한 정확한 요구사항을 식별하고, 요구사항과 일치하는 오픈소스를 조사하여 후보 목록을 추출하고, 평가기준을 수립하여, 이에 따라 활용 대상 오픈소스 소프트웨어를 선정하는 방법을 제시하였다. 또한 실제 프로젝트의 적용 실험과 평가를 통해 각 활동의 유효성과 개선점을 도출하였다. The development methods which utilize OSSs have been tried as new alternative to solve limits of the previous software developments such as the quality of software, and time and cost of developments. Especially, small and medium companies are suffering from difficulty in applying large-scale development methodology whenever they develop softwares. Therefore, in the current situation that demand for small-scale development methodology is increasing, the methods of utilizing OSSs can become an efficient way to save costs and reduce a development period. Accordingly, analysis of open-source is no fixed procedure or method to utilize open-source for software developments in the field. In this thesis, to solve such problems, we propose the procedures and methods for identifying and selecting suitable open-source, and effective methods for improvement and integration through least modification on the basis of synthesis of existing researches and experiences in development projects. For selection of OSSs, we did identify correct requirements for the software to be developed, investigate the open-source just matching with such requirements, draw a candidate index, establish assessment criteria, and the consequently present a method to select OSSs. And, we deduced the validity and improvement of each detailed activity from practical application to an actual project and assessment.

상용차 오일압력 측정용 압력센서 제작을 위한 레이저용접기술

이영민,김순동,최해운,Lee, Young-Min,Kim, Soon-Dong,Cho, Hae-Woon 대한용접접합학회 2012 대한용접·접합학회지 Vol.30 No.4

Using a fiber laser heat source, an oil pressure sensor was fabricated to measure the pressure in commercial vehicles. A stepping motor was used for the rotational and translational motion in the diaphragms and hardware joining. Laser welding process algorism including shielding gas control and vision system was integrated by using LabVIEW software for the high quality welding and in-line monitoring purpose. For the maximum flexibility in pressure transmission to the pressure sensor, thin sheet metal diaphragm, $25{\sim}50{\mu}m$(SUS-316L), was used and the diaphragms were optimally designed with FEM analysis. The welded samples were cross-sectioned the observation showed that the maximum depth ratio was more than seven times of diaphragms. The maximum welding speed was measured to be as high as 50in/mm by the developed automation mechanism. The fabricated prototypes were tested for the proof pressure, spring constant and sealing. The FEM results of spring constant measurement was as accurate as up to 80% of the design value and the sensor was safely operated up to the nominal pressure of 10bars.

타블렛 컴퓨터를 활용한 모바일 학습에 관한 학습자의 인식 조사

이영민,Lee, Young-Min 한국정보교육학회 2005 정보교육학회논문지 Vol.9 No.3

The purpose of the paper was to investigate students' perceptions of tablet computer-based mobile learning in a middle school. We examined the perceptions in terms of: 1) learning effectiveness, which refers to the effects of tablet computer on learning outcomes such as the grade; 2) attitude change, which is the change of students' attitudes and study habit; 3) learning activities, which refers to the kinds of learning activities using tablet computer; and 4) computer utilization, which is the ways of computer use in the study. The result showed that, in general, tablet computer affected all four types of perceptions positively.

ZTA에서 잔류응력이 파괴인성 증진에 미치는 영향

이영민,유진,Lee, Young-Min,Yu, Jin 한국세라믹학회 1990 한국세라믹학회지 Vol.27 No.3

In this investigation, bar-shaped specimens which consisted of three layers are prepared to study the effects of residual compressive stress on the mechanical properties in ZTA. The outer layers contained Al2O3 and unstabilized ZrO2 and the central layer contained Al2O3 and stabilized ZrO2(with 5.10wt% Y2O3). When cooled from the sintering temperature, some of zirconia in the outer layers transformed to the monoclinic form while zirconia in the central layer was retained in the tetragonal form. The transformation which induces to dilatational expansion led to the estabilishmenet of compressive stress in the outer layers and balances tensile stress in the central layer. Decrease of outer layer thickness(for a fixed total thickness)increases residual compressive stress. Because of residual compressive stress in the outer layers, the fracture toughness of outer layers of 3-layers composite is 10.21 Mpam1/2, which is increased to 25% above in comparison with 1-layer specimens in ZTA. Also, the 3-layers composite is believed to exhibite greater fracture resistance in contact damage environment from thermal shock test.

선형열처리를 이용한 Si(100)/Si$_3$N$_4$∥Si (100) 기판쌍의 직접접합

이영민,송오성,이상연,Lee, Young-Min,Song, Oh-Song,Lee, Sang-Hyun 한국재료학회 2001 한국재료학회지 Vol.11 No.5

절연 특성이 기존의 SiO$_2$ 보다 우수한 500 두께의 SiN$_4$층을 두 단결정 실리콘사이의 절연막질로 채택하고 직접접합시켜 직경 10cm의 Si(100) /500 -Si$_3$N$_4$/Si (100) 기판쌍을 제조하였다. p-type (100) 실리콘기판을 친수성, 소수성을 갖도록 습식방법으로 세척한 두 그룹의 시편들을 준비하였다. 기판전면에 LPCVD로 500 $\AA$ 두께의 Si$_3$N$_4$∥Si(100) 기판을 성장시키고 실리론 기판과 고청정상태에서 가접시킨 후, 선형열원의 이동속도를 0.1mm/s로 고정시키고 선형 입열량을 400~1125w 범위에서 변화시키면서 직접접합을 실시하였다. 접합된 기판은 적외선 카메라로 계면 접합면적을 확인하고 razor blade creek opening 측정법으로 세정 방법에 따른 각 기판쌍 그들의 접합강도를 확인하였다. 접합강도가 측정된 기판쌍은 high resolution transmission electron microscopy (HRTEM )을 사용하여 수직단면 미세구조를 조사하였다. 입열량의 증가에 따라 두 그를 모두 접합율은 큰 유의차 없이 765% 정도로, 소수성 처리가 된 기판쌍의 접합강도는 1577mJ/$m^2$가지 선형적으로 증가하였으나, 친수성 처리가 된 기판쌍은 주어진 실험 범위에서 입열량의 증가에 따라 큰 변화 없이 2000mj/$m^2$이상의 접합 강도를 보였다 친수성 처리가 된 기판쌍의 수직단면 미세구조를 고분해능 투과전자현미경으로 각인한 결과 모든 시편의 실리콘과 Si$_3$N$_4$사이에 25 $\AA$ 정도의 SiO$_2$ 자연산화막이 존재하여 중간충 역할을 함으로서 기판접합강도를 향상시키는 것으로 판단되었다. We prepared 10cm-diameter Si(100)/500 $\AA$-Si$_3$N$_4$/Si(100) wafer Pairs adopting 500 $\AA$ -thick Si$_3$N$_4$layer as insulating layer between single crystal Si wafers. Si3N, is superior to conventional SiO$_2$ in insulating. We premated a p-type(100) Si wafer and 500 $\AA$ -thick LPCVD Si$_3$N$_4$∥Si (100) wafer in a class 100 clean room. The cremated wafers are separated in two groups. One group is treated to have hydrophobic surface and the other to have hydrophilic. We employed a FLA(fast linear annealing) bonder to enhance the bond strength of cremated wafers at the scan velocity of 0.1mm/sec with varying the heat input at the range of 400~1125W. We measured bonded area using a infrared camera and bonding strength by the razor blade crack opening method. We used high resolution transmission electron microscopy(HRTEM) to probe cross sectional view of bonded wafers. The bonded area of two groups was about 75%. The bonding strength of samples which have hydrophobic surface increased with heat input up to 1577mJ/$m^2$ However, bonding strength of samples which have hydrophilic surface was above 2000mJ/$m^2$regardless of heat input. The HRTEM results showed that the hydrophilic samples have about 25 $\AA$ -thick SiO layer between Si and Si$_3$N$_4$/Si and that maybe lead to increase of bonding strength.