http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
2차원 이송-확산모형을 이용한 취수장 인근에서의 오염물질의 혼합거동 모의
김재동,김영도,류시완,서일원,Kim,Jae-Dong,Kim,Young-Do,Lyu,Si-Wan,Seo,Il-Won 한국방재학회 2008 한국방재학회 학술발표대회논문집 Vol.2008 No.1
하천에 위치하는 취수장의 수질관리에 있어서 오염물질의 이송-확산은 주요 관심사다. 오염물 이송에 관한 연구를 위해서는 하천의 사행에 따른 영향과 지류의 유입에 따른 혼합에 대해서 분석이 수행되어져야 한다. 본 연구의 목적은 낙동강 하류에 위치한 물금취수장 부근에서의 오염물의 혼합거동을 모의하고자 하였다. 물금취수장은 부산광역시의 음용수로써 이용되고 있으며, 물금취수장 인근에서의 흐름은 인근의 지천의 유입과 본류 유량, 그리고 하류단에 위치한 하구둑 수문개폐 여부의 영향을 받는다. 수문은 10개의 수문으로 구성되며, 평상시에는 조위에 따라서 보조수문을 개방하고 유량이 증가할 때 주수문을 함께 개방한다. 취수장 맞은편인 본류의 우안에는 지류인 대포천이 위치하는데 지류에서 발생한 오염물질은 취수장 인근에 흐름형태에 따라 취수구로 유입되기도 한다. 본 연구에서는 2차원 수치해석 결과를 바탕으로 오염사고에 대비한 적절한 취수장 운영방안을 제시하고자 하였다. The transport and dispersion of pollutants in natural river is a principal issue in intake station management. To study the pollutant transport in natural rivers, the effect of meandering and confluence of tributary on mixing process have to analyzed. The objective of this study is to simulate the mixing and transport of pollutants for operating water gate of Nakdong Estuary Barrage around the intake station. Mulgeum intake station being used as drinking water sources for Pusan. The flow around the intake station is influenced by operating water gate of Nakdong Estuary Barrage which is located downstream. The water gate system includes ten individual gates. The minor gate is usually opened according to elevation of the sea. When the river flow increases, the main water gate is opened. Daepo stream, tributary of the Nakdong river, is on opposite side of the intake station. The pollutants from Daepo stream often flows into the intake station acoording to the flow pattern. In this study, based on this simulation results, proper water gate operation which can minimize negative impact will be provided.
김재동 한국자원공학회 2012 한국자원공학회지 Vol.49 No.5
암반공학은 자원공학과 관련된 학문분야들 중 비교적 태동의 역사는 짧으나 그 기간에 비하여 볼 때 현격한 발전을 이룬 분야라고 할 수 있을 것이다. 우리나라 암반공학 분야의 전문 인력은 약 30여 년간 50배에 이르는 양적인 증가를 보여 2011년 현재 약 1,200 여명으로 추산되며, 연구 경향은 과거 광업과 관련된 분야 즉, 발파, 굴착, 지보, 암반 분류, 지압측정 등의 부분에서 절리와 균열 등에 관련된 절리거동 및 그와 관련된 지하유체 이동, THM 복합 해석기법, 연속 및 불연속체 암반 거동해석, 복합적 연구 분야의 생성 등 보다 전문화되고 구체적인 암반의 특성들을 규명하고자 하는 방향으로 나아가고 있다. 특히, 앞으로 암반공학은 해외자원의 자주개발을 위한 기술적 근간을 제공하고 국토개발을 위한 기술적 인프라를 구축하며 해결이 시급한 국가적 난제들, 즉 고준위 방사성폐기물의 처분, 국제적 교통로로서 초장대 해저터널의 건설, 통일을 대비한 DMZ 하부 지하공간의 개발, 여타 공학 분야들과의 복합적 기술개발 등을 해결하기 위한 연구와 기술 발전에 크게 기여할 것으로 전망한다. Rock Mechanics and rock engineering have relatively short historical era but their achievements shows quite outstanding results in Korea. The experts currently working increased up to about 1,200 which are 50 times more than the numbers of 30 years ago. The research trend tends to move from the so called conventional rock engineering fields to the new purpose-oriented parts. The conventional fields can be categorized as rock properties, blasting, excavation, support, classification, stress measurement and the new fields are joint and fracture, discontinuum analysis, THM analysis, fusion technology, etc. In the future, it can be prospected that rock engineering will contribute to finding solutions for oversea resources developments, establishing the technical infra for national land development, construction of HLW repository and undersea tunnels connecting neighbor countries, development of underground space below DMZ area and so on.
모델 기반 개발을 위한 Simulink 모델의 OPRoS 응용으로의 변환
김재동,김덕구,홍성수 제어로봇시스템학회 2010 제어로봇시스템학회 국내학술대회 논문집 Vol.2010 No.5
OPRoS is a software Platform for distributed robotics applications. It was designed to reduce application development cost and increase software reusability by employing a component based software development methodology to. Unfortunately, OPRoS Is incomplete yet since it supports the validation and simulation of an application only after software components is fully implemented. This leads to late error detection and correction, which results in increased development cost and time. The model driven design(MDD) approach can overcome such a limitation by allowing validation and simulation early in design phases. Simulink is one of the most popular simulation tools in the robotics domain and effectively supports MDD. This paper proposes a model transformation mechanism from a Simulink model to an OPRoS application. Our experimental results show that the proposed mechanism is able to achieve a valid model transformation as well as small run-time performance overhead.
김재동,김구대,문지웅,김창은,이해원 한국세라믹학회 1998 한국세라믹학회지 Vol.35 No.9
Interface reaction between LSMC and YSZ is discussed with chemical composition of LSMC. The reac-tivity between LSMC and YSZ increased with increasing Co amount and A-site deficient perovskite is very effective on reducing reactivity. The (La0.8Sr0.2)xMn0.8Co0.2O3 (X=0.9-1) composition is not reactive with YSZ in experimental range. The electrode reaction reaction resistance increases due to reaction product.