http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김용현,김영훈,김한군 ( Y . H . Kim,Y . H . Kim,H . G . Kim ) 한국열처리공학회 1997 熱處理工學會誌 Vol.10 No.1
The variation of the mechanical properties and the formation of retained austenite with heat treatment conditions in austempered Si bearing carbon steels has been investigated. In the case of a steel containing 0.35C-1.48Si-0.95Mn, it has been found that a feather shape bainite structure of lath are obtained under a isothermal treated condition at just below the Ms temperature, and the martensite, bainitic ferrite and retained austenite of second phase particles on the ferrite matrix for a isothermal treated steels after intercritical annealing are precipitated in a linked shape. The retained austenite with 2㎛ size induced as TRIP is found to increase with increasing the formation rate of retained austenite for the intercritical annealing and high Si containing steels. The tensile strength is increased as austempering temperature increases in all isothermal treatment temperature, whereas the elongation is shown to roughly decrease as the tensile strength increases. The values of tensile strength-elongation balance have showed a marked dependence upon the elongation rather than the tensile stregth, and their values are increased for high Si containing steels and intercritical annealing condition. The most optimum result has been shown to be the tensile stregth-elongation balance of 2882.4kgf/㎟.% and the elongation of 33.3% for a B steel in the heat treating temperature range of 780∼370℃.
Experimental Outdoor Visible Light Data Communication Systems with Optical Filter
김용현,정연호,Kim, Yong-Hyeon,Chung, Yeon-Ho The Korea Institute of Information and Commucation 2014 한국정보통신학회논문지 Vol.18 No.8
본 논문은 태양광 혹은 인공광이 존재하는 외부 환경에서 광필터를 적용한 실험적 실외 광무선 데이터 통신 시스템을 제안한다. 광잡음의 효과적인 차단을 위해 마이크로루버 필름을 사용한 광필터를 광다이오드에 직접 적용하였으며 잡음광이 광다이오드에 정면으로 입사하지 않는다는 가정하에 입사각 30도를 초과하는 잡음광을 차단하도록 설계하였다. 제안하는 시스템을 낮시간 실외에서 데이터 전송을 통해 검증하였는데 지정한 입사각 혹은 그 이상의 입사 잡음광에 대해 거의 완벽하게 차단할 수 있었으며 전송된 패킷데이터의 90%이상을 성공적으로 수신하였다. 본 제안 시스템은 향후 실외 자유공간 광무선 데이터 전송에 효과적으로 사용될 수 있을 것이다. An experimental outdoor optical wireless data communication system with an optical filter in the presence of sunlight or artificial light is presented. For the efficient blocking of light noise outdoors, we employ an optical filter made of microlouver film on the top of the photo diode. This filter is designed to block any light noise incident from an angle higher than $30^{\circ}$ on the assumption that light noise does not face the photo diode horizontally. Outdoor experiments daytime with the optical filtering have been conducted. The experimental results demonstrate that the optical filter effectively blocks nearly all light noise incident from the specified angle or higher and more than 90% of the transmitted data packets are successfully received. The proposed outdoor visible light data communication can thus facilitate a practical free space outdoor optical wireless data transmission.
김용현,이용복,정원일,김동규,강성진,Kim, Yonghyun,Lee, Yongbok,Jung, Wonil,Kim, Dongkyu,Kang, Sungjin 한국군사과학기술학회 2012 한국군사과학기술학회지 Vol.15 No.5
Cost estimates are necessary for government acquisition program to support decisions about funding, to develop annual budget requests and to validate resource requirements at key decision points. Many researches have been done about cost estimating technique recently. Parametric cost estimating models based on CERs(Cost Estimating Relationships) have been mainly used using regression method with historical data. However, there are many restrictions in developing Korean version CERs because the number of data points are too small. Specially, data collection and data management system are unstable in Korean defense environment, when developing CERs. In this research, we analyzed the historical data, and found some cost drivers in guided weapon system area. We developed the Acquisition Unit Cost CER using the regression to remove multicollinearity in the historical data. So we could overcome the restriction of the insufficient sample number. This research as a first attempt is meaningful in terms of obtaining our own Acquisition Unit Cost CER using historical cost and physical characteristic in Korean development environment.
The Tensile Properties and Wear Behavior of Mixing-reinforced Composites by Squeeze Casting Process
김용현,이광학,Kim, Yong-Hyeon,Lee, Gwang-Hak Materials Research Society of Korea 1999 한국재료학회지 Vol.9 No.4
The tensile strength and water resistance of ADC12 alloy matrix composites reinforced with saffil/ceraklwool and saffil/Si particle prepared by squeeze casting have been investigated in room temperature and $250^{\circ}C$. Adhesive and scuffing wear phenomena was studied when load was changed to 10~40N and wear velocity was 2.0m/s at room temperature and $250^{\circ}C$. Generally, the morphology of tensile fractured surface revealed dimple pattern which implies ductile fracture of the composites. However, cleavage fracture was also observed in case of ADC12 alloy based saffil/Si particle composite. The maximum tensile strength of 320MPa was obtained in ADC12 alloy based composites reinforced by saffil/cerakwool(5:5) preformed fibers. In the results of dry wear test, it was observed that scuffing was occurred at 40N in room temperature and 30N for $250^{\circ}C$.