NED를 사용하는 FH-CSS(Frequency Hopped - Chirp Spread Spectrum)의 항 재밍 성능 분석

김성호,김영재,황석구,조병각,신관호,김남,Kim, Sung-Ho,Kim, Young-Jae,Hwang, Seok-Gu,Jo, Byoung-Gak,Shin, Kwan-Ho,Kim, Nam 한국군사과학기술학회 2011 한국군사과학기술학회지 Vol.14 No.1

In the defence wireless communications, conventional Anti-Jamming techniques(Frequency Hopping/Spread Spectrum or Direct Sequence/Spread Spectrum) are used to overcome a intentional interfering signals which are single/multitone or partial band jammer etc. DS/SS techniques is very strong on tone jamming signal but not to be on a partial band jammer. So FH/SS AJ performances are expected method of an substitution of DS/SS, however FH/SS could not have good performance on some BMTJ(Band Multi-tone Jammer). So this paper proposes FH-CSS (Frequency Hopped - Chirp Spread Spectrum) to get more robustness against jammers(BMTJ, PBNJ) and analyze the AJ performances.

Pseudomonas cepacia 균주가 생산하는 항진균성 Cyclic Lipopeptide 의 생물학적 및 물리 화학적 특성

김성호,이민웅 ( Sung Ho Kim,Min Woong Lee ) 한국균학회 1996 韓國菌學會誌 Vol.24 No.4

폴리에틸렌글리콜이 그라프트된 폴리우레탄 막에 ${\alpha}$-아밀라제의 고정화

김성호,하정헌,Kim, Sung-Ho,Ha, Chung-Hun 한국약제학회 1991 Journal of Pharmaceutical Investigation Vol.21 No.3

${\alpha}-amylase$ was immobilized on the surface of polyethylene glycol(M.W. 2000) grafted polyurethane film using diisocyanate in an attemp to develop enzyme immobilized polymeric materials. The surface morphology of the modified polyurethane film was examined by SEM. Effects of pH and temperature on the activity of the immobilized ${\alpha}-amylase$ were investigated. The optimal pH range of the activity was $7.0{\sim}7.5.$ The immobilized ${\alpha}-amylase$ demonstrated high thermal stability and maintained consistent activity during long-term storage.

치주질환 심도와 치은 열구액 내 Arylsulfatase에 관한 연구

김성호,김형섭,Kim, Sung-Ho,Kim, Hyung-Sob 대한치주과학회 1990 Journal of Periodontal & Implant Science Vol.20 No.1

가비지 컬렉션과 마모도 평준화 대상 블록의 구분을 위한 블록 소거 횟수 기반 모니터링 기법

김성호,황상호,이명섭,곽종욱,박창현,Kim, Sungho,Hwang, Sang-Ho,Lee, Myungsub,Kwak, Jong Wook,Park, Chang-Hyeon 대한임베디드공학회 2017 대한임베디드공학회논문지 Vol.12 No.3

In this paper, we propose BCMR (Block Classification with Monitor and Restriction) to ensure the isolation and to reduce the interference of blocks between a garbage collection and a wear leveling. The proposed BCMR monitors an endurance variation of blocks during the garbage collection and detects hot blocks by making a restriction condition based on this information. The proposal induces a block classification by its update frequency for the garbage collection and the wear leveling, so we will get a prolonged lifetime of NAND flash memory systems. In a performance evaluation, BCMR prolonged the lifetime of NAND flash memory systems by 3.95%, on average and reduced a standard deviation per block by 7.4%, on average.

아토피 아동 가정내 집먼지 진드기 농도와 환경요인: 환자 대조군 연구

김성호,박동진,변혜정,이현수,오인보,심창선,김양호,윤충식,Kim, Sung-Ho,Park, Dong-Jin,Byun, Hyae-Jeong,Lee, Hyun-Soo,Oh, In-Bo,Sim, Chang-Sun,Kim, Yang-Ho,Yoon, Chung-Sik 한국환경보건학회 2012 한국환경보건학회지 Vol.38 No.3

Objectives: The purpose of this study was to determine house dust mite concentrations in living rooms and bedding materials in atopic case-control groups. Methods: Fifty four homes with children suffering atopic diseases as cases and fifty one homes without atopic diseases as controls were selected after diagnosis at three elementary schools in Ulsan City. Dust samples were collected from the living rooms and bedding materials in each home during summer and winter with a vacuum cleaner and analyzed for house dust mites using enzyme-linked immunosorbent assay (ELISA). Environmental factors and family history were surveyed during sampling. Results: Both species of house dust mite Dermatophagoides farina (Der f 1) and Dermatophagoides pteronyssinus (Der p 1) were found in all homes. Derf1 concentrations were much higher than Der P1 concentrations, both in atopic homes (1518.9 vs. 27.0 ng/g. dust, respectively) and non-atopic homes (810.8 vs. 44.3 ng/g. dust, respectively). Der f 1 concentrations were significantly higher in the atopic group than in the non-atopic group (atopic: 1518.9 ng/g.dust, non-atopic: 810.8 ng/g.dust, p = 0.035). However, total house dust mite Der p 1 concentrations were significantly higher in the non-atopic group than in the atopic group (atopic: 27.0 ng/g.dust, non-atopic: 44.3 ng/g.dust, p = 0.035). Multiple regression implied that mothers with family history of atopic diseases (OR = 4.79, 95% CI = 1.81-12.69), Der f 1 concentrations (OR = 1.74, 95% CI = 1.07-2.81), and air freshener use (OR = 4.60, 95% CI = 1.72-12.34) had significant associations with atopic children. Conclusion: House dust mite Der f 1 concentrations were associated with atopic children. This study suggests that parents should reduce house dust mite Der f 1 concentrations through environmental controls.

레이놀드 수에 따른 색소 젯트의 특성 및 색소레이저의 출력변화

김성호,고도경,이종민,임권,조재흥,장수,Kim, Sung Ho,Ko, Do-Kyeong,Lee, Jong-Min,Lim, Gwon,Jo, Jae-Heung,Chang, Soo 한국광학회 1994 한국광학회지 Vol.5 No.4

레이놀드 수에 따른 색소 젯트의 공간적인 편평도를 마이켈슨 간섭계를 이용하여 분석하였다. 레이놀드 수 600(유속 12m/s)일 때 색소 젯트의 편평도는 최적 조건을 보였다. 이러한 색소 젯트의 최적 조건하에서 종펌핑 Littman형 색소레이저 빔은 펌프 에너지 0.5-1.0mJ/pulse의 범위에서 단일 종모우드로 발진되었다. 이 때의 선폭은 470MHz이었고, 변환 효율과 빔 발산각은 각각 4.7%, 3mrad이었다. The spatial flatness of dye jet depending on the Reynold's number has analyzed by using a Michelson interferometer. When the Reynold's number of dye jet was 600, the flatness of the flow was the best. Under this condition, the dye laser with Littman-type configuration has been operated in a single longitudinal mode at the pumping energy of 0.5~1.0 mJ/pulse. The conversion efficiency and beam divergence were 4.7% and 3 mrad, respectively. ively.

중부고속도로 평탄성 특성에 관한 연구

김성호,서영찬,조윤호,박경부,Kim, Sung-Ho,Suh, Young-Chan,Cho, Yoon-Ho,Park, Kyung-Boo 한국도로학회 2001 한국도로포장공학회 논문집 Vol.3 No.2

무근 콘크리트 포장(JCP)과 연속철근 콘크리트 포장(CRCP)간의 우열 논쟁은 추후의 공용성 비교를 위해 중부고속도로(1987년 개통)를 두가지 포장형식으로 절반씩 시공하기에 이르렀다. 개통후 13년이 경과한 현 시점에서 두 포장의 공용성을 직접 비교하는 것은 의미 있는 일이다. 본 연구는 두 포장을 비교하기 위한 기본적 연구로서, 우선 고속도로 기능의 핵심이 피는 평탄성(IRI)을 중부고속도로 전구간(상행선 주행차로)에 대해 자동포장상태조사장비(ARIA)를 이용하여 조사 분석하였다. 중부고속도로 평탄성을 포장 형태별(CRCP, JCP, 부분적 Asphalt)로 비교 분석한 결과, CRCP, JCP, Asphalt의 순서로 우수한 평탄성을 나타내었고, 교량 및 터널 접속부에서는 IRI(Internation Roughness Index)가 5이상으로서 개선의 여지를 가지고 있었다. '99년 한국도로공사에서 실시한 중부고속도로 포장표면 결함조사 자료와의 상관관계를 검토한 결과, JCP의 경우는 균열과 IRI가 서로 상관관계가 있는 것으로 나타났으며, 기타 파손들은 뚜렷한 관계를 나타내지 못하였다. 또한, 미국 LTPP(Long Term Pavement Performance) 자료중 JCP 구간인 GPS-3과 CRCP 구간인 GPS-5 자료를 바탕으로 평탄성 측면을 비교한 결과 중부고속도로가 선진국 콘크리트 포장에 뒤떨어지지 않음을 확인하였다. 토공부에서의 평탄성 저하 구간의 가장 큰 원인은 지하통로 및 배수로 통과 등이었으며, 지하통로가 있는 CRCP 및 JCP 구간을 비교한 결과, CRCP가 역시 좋은 평탄성을 보여주었다. Concrete pavement of Jungbu Expressway composed of CRCP(Continuously Reinforced Concrete Pavement) and JCP(Jointed Concrete Pavement). The CRCP was firstly constructed and applied to new expressway in Korea. It is a good source of the study to analyze the performance of CRCP and JCP because it experiences same amount of traffic and environmental loading. Up to the present, condition survey has conducted several times during 13 years but roughness measurement has not been carefully conducted. Through comparisons among several types of pavement(CRCP, JCP, Asphalt) by roughness, CRCP is superior to JCP. In addition, connected sections in the highway such as bridges and tunnels that have higher IRI values, about 5mm/m, than normal sections should be considered appropriated maintenance such as diamond grinding. The relationship between IRI and distresses carried out by Korea Highway Cooperation in 1999 skewed that the number of crack is related to IRI value in JCP, while other distresses of JCP and CRCP are not shown clearly. The comparison study with IRI values between Jungbu Expressway and GPS-3(JCP) and GPS-5(CRCP) of LTPP data also showed that roughness of Jungbu Expressway is not inferior to that of the state. Some of section showed larger values of IRI are linked with under-9round structures for passages and drainages. The overall performance considering only roughness, the CRCP is also superior to JCP in sections with under-ground tunnels.

강섬유와 폴리에틸렌섬유가 하이브리드된 SHCC의 팽창재 대체에 따른 수축 및 인장 특성

김성호,류승현,강수원,김희종,윤현도 한국구조물진단유지관리학회 2011 한국구조물진단학회 학술발표회논문집 Vol.2011 No.9

This paper investigated shrinkage and direct tensile of SHCC with hybrid steel and polyethylene fiber. Properties studied include those of the shrinkage behavior and direct tensile behavior of expansive SHCCs with different expansive admixture(0% and 10%) were evaluated. Test result show that the inclusion of EXA in SHCC materials decreases the shrinkage strain and impropve tensile properties.

황 회수 공정 설계에서 부 반응의 영향

김성호,정원석,이희문,장근수,Kim, Sung Ho,Jung, Won Seok,Lee, Hee Mun,Chang, Geun Soo 한국플랜트학회 2017 플랜트 저널 Vol.13 No.3

황회수 공정의 연소반응기 안에서는 평형반응 및 kinetic 반응이 동시에 일어난다. 주요 kinetic 반응에 참여하는 성분들은 수소($H_2$), 일산화탄소(CO), 카보닐황화물(COS) 그리고 이황화탄소($CS_2$) 이다. 본 연구에서는 평형반응, 상관관계식(empirical correlations) 그리고 황 회수 공정의 라이센서 자료의 비교를 통해 반응기에서 kinetic components (COS와 $CS_2$)의 생성 양을 분석한다. 또한 kinetic components ($H_2$ 와 CO)의 생성 양의 분석을 통해 반응기에서의 생성 양과 온도와의 상관관계를 분석한다. 부 반응이 전체 연소에 필요로 하는 산소의 양에 어떤 영향을 미치는지도 같이 분석을 한다. 황회수 공정의 반응기내의 부 반응에 대한 충분한 이해는 전체 황회수 공정 설계를 할 때 최적의 장치 설계를 가능하게 하고 나아가 황회수 효율을 극대화 하는데 도움이 된다. In the reaction furnace of modified Claus process, chemical equilibrium reactions and kinetic reactions occur simultaneously. The main kinetic components are hydrogen ($H_2$), carbon monoxide (CO), carbonyl sulphide (COS) and carbon disulphide ($CS_2$). The equilibrium calculations, empirical correlations and sulfur recovery technology providers' (licensors) data for kinetic components (COS and $CS_2$) in the reaction furnace were analyzed to evaluate the amount of kinetic components by applying them to five different projects in which GS Engineering & Construction participated. Kinetic components ($H_2$ and CO) are also calculated and the results are analyzed to evaluate the impact of temperature in the reaction furnace and the waste heat boiler. Total required $O_2$ deviations for combustion in the reaction furnace are additionally shown, with and without side reactions. A full understanding of side reactions in the modified Claus process can help to improve sulfur recovery efficiency and optimize equipment design.