푸코-데리다의 광기 논쟁에 대한 ‘데리다적’ 독해 -「코기토와 광기의 역사」 다시 읽기-

김민호(Kim, Minho) 서울대학교 철학사상연구소 2021 철학사상 Vol.79 No.-

우리의 목적은 「코기토와 광기의 역사」를 데리다라는 사상가 ‘의’ 텍스트로서 읽음으로써 이 텍스트를 해석할 때 주로 푸코의 이후의 저작들에 조회하는 김은주의 논의를 일정하게 보충하는 데에 있다. 우리는 「코기토와 광기의 역사」에 선행하는 데리다의 두 저작, 즉 『발생의 문제』 및 『《기하학의 기원》에 대한 서설』에서 출발해서 이 논쟁에 개입한다. 이를 위해 우리는 『발생의 문제』 및 『서설』에서 푸코가 데리다를 비판하는 논점들이 앞질러 예고됨을 (2장), 그 함축에 입각하여 「코기토와 광기의 역사」가 감행하는 독해의 의의를 규명하면서 푸코의 데리다에 대한 비판이 데리다에게는 여전히 미진함을(3장), 마지막으로 데리다야말로 『성찰』을 하나의 사건으로 만들고 있음을(4장) 보인다. This article aims to complement Eunju Kim’s reading of “Cogito and the History of Madness,” oriented towards Foucault’s later works, by examining it in the light of Derrida’s early writings on Husserl’s thought, i.e. The Problem of Genesis in Husserl’s Philosophy and Introduction to Husserl’s Origin of Geometry. It argues that the basis of Foucault’s critique of Derrida’s interpretation of Meditations on First Philosophy, as reconstructed by Kim, is not far from that of Derrida’s own philosophy (II). From this viewpoint, Foucault’s critique is refuted in advance within the scope of “Cogito and the History of Madness” (III), which implies that, contrary to what Foucault and Kim believe, Derrida is the one who makes Descartes’ Meditations “an event worthy of its name” (IV).

철 석출장치가 결합된 무산소.호기공정에 의한 인 제거 특성

김민호,김영규,김수복,Kim, Min-Ho,Kim, Young-Gyu,Kim, Soo-Bok 한국환경보건학회 2010 한국환경보건학회지 Vol.36 No.6

In this study, the (phosphorous removal) the characteristics of phosphorous removal due to (the iron compound precipitated) iron compound precipitation by iron electrolysis in (the anoxic. oxic process) anoxic and oxic processes (equipped with the) in an iron precipitation device were analyzed. During the device operation period, the average concentration of BOD, T-N, and T-P were 219.9 mg/l, 54.6 mg/l and 6.71 mg/l, respectively. The BOD/$COD_{Cr}$ ratio was 0.74, and the BOD/T-N and BOD/T-P ratios were 4.0 and 32.8, respectively. The removal rate of (the organic matters) organic matter (BOD and $COD_{Cr}$) was very high at 91.6% or higher, and that of nitrogen was 80.5%. The phosphorous concentration (of the final) in the treated water was 0.43 mg/l (0.05-0.74 mg/l) on average, and the removal efficiency was high at 90.8%. The soluble T-P concentrations in (an) the anoxic reactor, oxic reactor (II) and final treated water were 1.99 mg/l, 0.79 mg/l and 0.43 mg/l, respectively, which indicated that the phosphorous concentration in the treated water was very low. Regardless of the changes in the concentrations of (organic matters) organic matter, nitrogen and phosphorous in the influent, the quality of the treated water was relatively stable and high. The removal rate of T-P somewhat increased with the increase in the F/M ratio in the influent, and it also linearly increased in proportion to the T-P loading rate in the influent. In the treatment process used in this study, phosphorous was removed (using) by the precipitated iron oxide. Therefore, the consumption of organic (matters) matter for biological phosphorus removal was minimized and (most of the organic matters were) was mostly used as the organic carbon source for the denitrification in the anoxic reactor. This (can be an economic) treatment process (without the need for the supply of additional organic matters) is economic and does not require the supply of additional organic matter.

새로운 미래 교육의 산실 콜롬보한국교육대학

김민호,Kim, Min-Ho 한국대학교육협의회 2004 大學敎育 Vol.128 No.-

프랑스에서 한의학의 보급과 제도화 과정 : 침술의 경우

김민호,Kim, Mn-Ho 대한예방한의학회 2010 대한예방한의학회지 Vol.14 No.1

The aim of this study is to observe the spread and implementation of acupuncture as an official medical treatment in France. This research is based on the study of the scientific magazine produced by the Association of Acupuncturist Doctors of France from 1945 to 2008 as well as medical and sociological studies. Western medicine was introduced and spread in Korea about one hundred years ago and is the foundation of modern Korean medicine. Nowadays it is more commonly employed than traditional Oriental medicine. Oriental medicine was introduced in France in the 17th century but only acupuncture gained notoriety. The French Faculty of Medicine officially chose to legalize acupuncture after WWII but only allowed doctors to study acupuncture. It takes three years to obtain an Inter-University Degree(DIU) in acupuncture therapy. Why would the Faculty of Medicine make a holistic treatment system official that is in opposition to the systematic treatment method of the Western medicine? The second question posed is, does Western Academia still recognize acupuncture as a viable treatment method? The final question addressed is, has acupuncture any real impact on medical treatment of the French Society?

폐로(肺勞)에 관한 문헌적(文獻的) 고찰(考察)

김민호,Kim, Min-Ho 대한한방내과학회 1990 大韓韓方內科學會誌 Vol.11 No.2

항만 감시를 위한 수중 강자성 표적 탐지에 관한 연구

김민호,주웅걸,임창선,윤상기,문상택,Kim, Minho,Joo, Unggul,Lim, Changsum,Yoon, Sanggi,Moon, Sangtaeck 한국군사과학기술학회 2015 한국군사과학기술학회지 Vol.18 No.4

Many countries have been developing and operating an underwater surveillance system in order to protect their oceanic environment from infiltrating hostile marine forces which intend to lay mines, conduct reconnaissance and destroy friendly ships anchored at the harbor. One of the most efficient methods to detect unidentified submarine approaching harbor is sensing variation of magnetism of target by magnetic sensors. This measurement system has an advantage of high possibility of detection and low probability of false alarm, compared to acoustic sensors, although it has relatively decreased detection range. The contents of this paper mainly cover the analysis of possible effectiveness of magnetic sensors. First of all, environmental characteristics of surveillance area and magnetic information of simulated targets has been analyzed. Subsequently, a signal processing method of separating target from geomagnetic field and methods of estimating target location has been proposed.

선천성 횡경막 탈장증치험 1예

김민호,구자홍,김공수,Kim, Min-Ho,Gu, Ja-Hong,Kim, Gong-Su 대한흉부심장혈관외과학회 1987 Journal of Chest Surgery (J Chest Surg) Vol.20 No.4

Congenital diaphragmatic hernia remains a disease with high neonatal mortality rate despite recent advance in neonatal intensive care. We experienced one case of the congenital diaphragmatic hernia with acute respiratory distress and left pulmonary hypoplasia in the neonate. The simple closure was performed through left paramedian approach after diagnosis. The postoperative course was uneventful except wound disruption. The patient was follow-up with good general condition.

간헐외사시에서 근시 진행과 수술 후 외편위 재발과의 상관관계

김민호,정승아,최아영,이종복,Min Ho Kim,Seung Ah Chung,Ah Young Choi,Jong Bok Lee 대한안과학회 2012 대한안과학회지 Vol.53 No.11

Purpose: To investigate the relationship between myopic progression and exodrift after surgery in patients with intermittent exotropia (X[T]). Methods: Eighty-five patients who underwent bilateral lateral rectus recession for X(T) and had a follow-up of more than 1 year were recruited for the present study. Progression of myopia was determined by measuring the difference in spherical equivalent of both eyes between the initial and final refraction divided by the total follow-up time per patient. Postoperative exodrift was calculated by subtracting the deviation at postoperative 6 weeks from the deviation at the last follow-up, and the deviation at postoperative day 1 from the deviation at postoperative 6 weeks. Linear regression was conducted to determine the relationship between postoperative exodrift and myopic progression. The risk factors for recurrence, defined as exodeviation of 10 prism diopters or more at the final examination, were also analyzed. Results: Sixty-eight (80.0%) subjects showed myopic progression of -0.50 diopters or more, and 47 (55.3%) had recurrence of exotropia during the mean follow-up period of 37.9 months. Patients with myopic progression showed more exotropic drift after postoperative 6 weeks than the patients without myopic progression (p < 0.01). Immediate postoperative overcorrection, oblique dysfunction, and a short follow-up period were associated with a low recurrence, whereas preoperative angle of exodeviation, sensory status, and age at the time of surgery were not. Conclusions: In patients who underwent bilateral lateral rectus recession for X(T), a greater myopic progression was related with greater postoperative exodrift. As the development of myopia was observed to be axial in nature, the results from the present study raises the possibility that ocular elongation may reduce the effect of recession.

외국대학과 외국교육기관 설립에 관한 제언

김민호,Kim, Min-Ho 한국대학교육협의회 2004 大學敎育 Vol.128 No.-

서로 다른 형태의 임플란트의 식립토크가 골에 미치는 열변화에 관한 연구

김민호,여인성,김성훈,한중석,이재봉,양재호,Kim, Min-Ho,Yeo, In-Sung,Kim, Sung-Hun,Han, Jung-Seok,Lee, Jai-Bong,Yang, Jae-Ho 대한치과보철학회 2011 대한치과보철학회지 Vol.49 No.2

연구 목적: 임플란트 식립시에 발생할 수 있는 열변화는 임플란트의 실패를 초래할 수 있다. 식립토크에 따른 열변화 양상을 파악함으로 임플란트의 형태에 따른 차이점과 적절한 식립토크가 어떤 것인지 파악하고자 한다. 연구 재료 및 방법: 실험재료로는 두께 15 - 20 mm의 소 견갑골을 가로 35 mm, 세로 40 - 50 mm 크기가 되도록 골편으로 자르고 이중에 피질골의 두께가 2 - 3 mm 되는 표본을 선정한 후 표본의 반을 $36.5^{\circ}C$ 수조에 실온 $25^{\circ}C$에 노출 시켜 내부 온도는 평균 $36.5^{\circ}C$, 표면온도 $28^{\circ}C$가 되도록 설계하였다. $4.5{\times}10\;mm$의 외부육각을 가지는 Br${\aa}$nemark 형태의 임플란트와 $4.8{\times}10\;mm$의 Microthread 형태를 지니는 내부연결 형태의 임플란트를 과도한 식립토크로 식립하고 온도 측정은 계측점에서 0.2 mm 이내에 열전대를 위치시켜 기록하였다. 삼차원유한요소 분석은 골의 형태를 가로 4 cm, 세로 4 cm, 높이 2 cm의 직육면체로 가정하고, 직육면체 윗면에서 2 mm까지를 피질골, 그 아랫부분을 해면골이라고 가정하였다. 마찰열은 매식이 종료된 상황에서 골에 남는 cavity 모양을 기초로 경계조건을 부여하였다. CAD 프로그램인 SolidWorks 소프트웨어를 이용하였고, 이를 유한요소 구조해석용 프로그램인 Abaqus 6.9-1로 불러들여 해석하였다. 결과 및 결론: In vitro실험에서 Microthread type의 임플란트가 상대적으로 더 높은 최고점 온도를 보여주고 있으며 이는 임플란트의 형태에 따른 마찰열 발생이 주요 원인으로 보인다. 유한요소분석을 통해 살펴본 결과 Br${\aa}$nemark 형태의 임플란트의 경우 50 Ncm이상에서 Microthread를 가지는 형태의 경우에는 35 Ncm이상에서 Eriksson 등이 보고한 역치를 초과하는 온도가 발생하였다. 이를 통해 볼 때 Microthread type 이 식립토크에 따른 온도 증가가 더 민감함을 알 수 있다. 실험결과를 통해서 서로 다른 형태의 임플란트 식립시에 임플란트의 형태에 따라 적절한 삽입토크를 부여하는 것이 성공적인 임플란트 시술에 중요한 요소 중에 하나임을 알 수 있었다. 특히 Microthread를 갖는 임플란트 형태는 높은 초기고정성을 얻을 수 있다는 장점이 있는 반면 과도한 식립 토크로 인한 열 손상 가능성을 가질 수 있으므로 골량과 골질의 신중한 평가와 적절한 수술기법이 필요할 것으로 생각된다. Purpose: This study aims at investigating the influence of various insertion torques on thermal changes of bone. A proper insertion torque is derived based on the thermal analysis with two different implant designs. Materials and methods: For implant materials, bovine scapula bone of 15 - 20 mm thickness was cut into 35 mm by 40 - 50 mm pieces. Of these, the pieces having 2 - 3 mm thickness cortical bone were used as samples. Then, the half of the sample was immersed in a bath of $36.5^{\circ}C$ and the other half was exposed to ambient temperature of $25^{\circ}C$, so that the inner and surface temperatures reached $36.5^{\circ}C$ and $28^{\circ}C$, respectively. Two types of implants ($4.5{\times}10\;mm$ Br${\aa}$nemark type, $4.8{\times}10\;mm$ Microthread type) were inserted into bovine scapula bone and the temperature was measured by a thermocouple at 0.2 mm from the measuring point. Finite element method (FEM) was used to analyze the thermal changes at contacting surface assuming that the sample is a cube of $4\;cm{\times}4\;cm{\times}2\;cm$ and a layer up to 2 mm from the top is cortical bone and below is a cancellous bone. Boundary conditions were set on the basis of the shape of cavity after implants. SolidWorks was used as a CAD program with the help of Abaqus 6.9-1. Results: In the in-vitro experiment, the Microhead type implant gives a higher maximum temperature than that of the Br${\aa}$nemark type, which is attributed to high frictional heat that is associated with the implant shape. In both types, an Eriksson threshold was observed at torques of 50 Ncm (Br${\aa}$nemark) and 35 Ncm (Microthread type), respectively. Based on these findings, the Microthread type implant is more affected by insertion torques. Conclusion: This study demonstrate that a proper choice of insertion torque is important when using a specific type of implant. In particular, for the Microthread type implant, possible bone damage may be expected as a result of frictional heat, which compensates for initial high success rate of fixation. Therefore, the insertion torque should be adjusted for each implant design. Furthermore, the operation skills should be carefully chosen for each implant type and insertion torque.