http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
강대하(Dae Ha Kang),이재훈(Jae Hoon Lee),노일수(Il Soo Rho),박상호(Sang Ho Park) 대한전기학회 2006 대한전기학회 학술대회 논문집 Vol.2006 No.7
In this paper dielectric and piezoelectric properties were measured for 2 phase - dispersed composite system consisting of ferroelectric ceramic PZTparticles and polymer PVC. The results were analyzed and the validity of composite theories for experimental results were discussed. And also in high temperature where ionic conductivity is dominated, linear and nonlinear permittivites were measured and discussed.
3차원 타이어 모델 및 노면 데이터를 활용한 가상내구로 주행 시뮬레이션
강대오(Dae-Oh Kang),허승진(Seung-Jin Heo),손성효(Seong-Hyo Son),류영일(Young-Il Ryu) 한국자동차공학회 2006 한국자동차공학회 춘 추계 학술대회 논문집 Vol.- No.-
Durability of automotive structures is a primary engineering consideration that is evaluated during a vehicle design and development. In addition, it is a basic expectation of consumers, who demand ever-increasing levels of quality and dependability. Automakers have developed corporate requirements for vehicle system durability which must be met before a product is delivered to the customer. To provide early predictions of vehicle durability, prior to the construction and testing of prototypes, it is necessary to predict the forces generated in the vehicle structure due to road inputs. This paper describes an application of the virtual proving ground? approach for vehicle durability load prediction for a vehicle on proving ground road surfaces. Correlation of the results of such a series of simulations will be described, and the modeling and simulation requirements to provide accurate simulations will be presented.
강대하(Dae-Ha Kang),박상호(Sang-Ho Park),노일수(Il-Soo Rho),최필수(Phil-Soo Choi),심재구(Jae-Gu Sim) 대한전기학회 2009 대한전기학회 학술대회 논문집 Vol.2009 No.7
In this study dielectric and piezoelectric properties of fluoro-rubber/PZT composite were measured and analyzed by composite's laws. As the results the Rayleigh's equation was well consistent with experimental results qualitatively and the Bruggeman's equation was more well consistent with the experimental results for volume fraction of PZT quantitatively.
원자력발전소의 스위치기어실 화재모델링 입력모수 불확실성 분석
강대일(Kang, Dae-Il),박종석(Park, Jong-Seuk),한상훈(Han, Sang-Hoon) 한국화재소방학회 2011 한국화재소방학회 학술대회 논문집 Vol.2011 No.춘계
본 논문에서는 원자력발전소의 스위치기어실 화재로 인한 케이블 손상시간과 케이블 온도를 평가하기 위해 화재모델링 입력모수 불확실성 분석을 수행하였다. 화재모델링은 FDS 5.5를 사용하였으며 입력모수 샘플링은 Wilks 식에 따라 93회를 수행하였다. 단순히 입력모수 평균 값을 사용한 화재모델링 분석결과는 화재모델링 불확실성 분석결과보다, 케이블 손상시간은 최대 1.6배 늦게, 케이블 온도는 최대 0.45배 낮게 평가될 수 있는 것으로 나타났다.
2009 개정 사회과 교육과정의 특징과 과제 -시수 편제 논의를 중심으로-
강대현 ( Dae Hyun Kang ),모경환 ( Kyung Hwan Mo ),차조일 ( Jo Il Cha ) 한국사회과교육학회 2011 시민교육연구 Vol.43 No.3
This study reviews the background in which the debate over the allocation of class time took place during the development of the 2009 Revised Social Studies Curriculum as a part of the National Common Basic Curriculum, and provided some suggestions for the successful implementation of the new curriculum. Unlike the 7th and the 2007 Revised Social Studies Curriculum, which allocated the class hours for each subject area, the 2009 Revised Social Studies Curriculum assigns the standard hours for social studies/ethics subject area. This means that the time allocation for each subject is dependent upon local school districts and individual schools. Thus local schools should not be constrained by the old framework of the 2007 Revised Social Studies Curriculum, and endeavor to rationally allocate class hours for the cultivation of future citizens for the 21st century Korean society.
안와관골 복합체 골절에서 술전 평가로서 눈깜박반사 검사의 유용성
강대일,박상우,최재훈,Kang, Dae-Il,Park, Sang-Woo,Choi, Jae-Hoon 대한성형외과학회 2010 Archives of Plastic Surgery Vol.37 No.6
Purpose: As the evaluation of the preoperative sensibility in the orbitozygomatic complex fracture, used by most surgeons, depends on the patient's subjective judgements, it is difficult to make generalization and to use it as an objective evaluation method. We used the blink reflex study to objectively evaluate injury to the infraorbital nerve. Methods: From December 2008 to November 2009, a total of 16 patients underwent the patient's subjective report on sensory symptoms and the blink reflex study preoperatively. Among patients having orbitozygomatic complex fracture of type III or more according to Henderson's classification and simultaneously suspected as being injured along the infraorbital nerve pathway, patients who had difficulty in checking preoperative sensibility and said 'normal sensibility' were selected as candidates. Results: Fifteen patients showed abnormal R1 on the fracture side. These results suggested that most of patients had injury to the infraorbital nerve. Conclusion: Contrary to the existing tests, the blink reflex study is a useful diagnostic tool in reflecting injury to the infraorbital nerve objectively.
원자력발전소 화재 안전성분석에서 화재 유발 케이블 손상시간 추정
강대일(Dae Il Kang),정용훈(Yong Hun Jung) 한국화재소방학회 2022 한국화재소방학회 학술대회 논문집 Vol.2022 No.춘계
원자력발전소의 화재로 인한 전기 케이블의 손상 시간 평가는 케이블과 연결된 기기(equipment)의 손상시간과 직접 연관되기에 화재 안전성 평가에 매우 중요하다. 화재 유발 전기 케이블 손상시간은 원자력발전소의 안전정지를 위한 운전원 행위 신뢰성에 커다란 영향을 미치기 때문이다. 원자력발전소에서 화재로 인한 전기 케이블의 손상 결정에는 세 가지 방법(단일 노출 경계치(exposure threshold), 온도에 따른 시간 손상 표(lookup table), THIEF(Thermally -Induced Electrical Failure) 모델)이 사용되어 왔다. 이들 방법 중 단일 온도나 단일 열속(heat flux) 값을 기준으로 케이블 손상을 결정하는 단일 노출 경계치 값이 많이 사용되고 있지만 케이블 손상까지 소요되는 케이블 가열시간을 고려하지 않아 보수적이다. THIEF 모델은 많은 데이터를 사용하기에 제한적으로 이용되고 있다. NUREG-2178에서는 최근 기존 세 가지 방법들의 단점들을 보완하기 위해 열흡수법(heat soak method)을 발표하였다. 이 방법은 케이블이 화재에 의해 가열되는 시간을 고려하여 케이블 손상시간을 결정한다. 본 논문에서는 일반 임시 점화원(transient ignition source)에 의해 노출된 열경화성(thermo-set) 케이블의 화재 시나리오에 대해 열흡수법과 단일 노출 경계법을 적용하여 케이블 손상 시간을 추정하고 비교하였다. 임시 점화원 열방출율은 NUREG-2233에서 제시한 식을 사용하였고, 점화원의 플름 온도 추정은 Heskestad의 플름(plume)온도 상관 식을 사용하였다. 본 연구결과, 임시 점화원 화재 유발 케이블 손상시간 추정에 대한 열흡수법의 적용은 현실적인 원전 화재 안전성 평가에 기여할 수 있을 것으로 판단된다.
주름 각도와 피치에 따른 판형 열교환기 전열특성에 관한 수치해석 연구
강대기(Dae-Ki Kang),김시범(Si-Pom Kim),황일주(Il-Ju Hwang),이재훈(Jae-Hoon Lee),도태완(Tae-Wan Do),여운엽(Woon-Yeop Yeo) 한국기계가공학회 2012 한국기계가공학회지 Vol.11 No.3
For numerical analysis of the plate heat exchanger, a lot of time are required in modeling work and calculation. Whereas, this paper was purposed to identify characteristic of the plate heat exchanger through simplification of modeling by interpreting the numerical analysis proximity with the actual model. This study was also examined temperature difference between inlet side and outlet side, inner pressure drop, heat transfer area of plate and change of heat transfer coefficient on the plate depending on the inner corrugation angle and corrugation pitch of a herring bon pattern of the plate heat exchanger among chevron types of the plate exchanger.