근관 세척법이 Resilon/Epiphany sealer와 Gutta-percha/AH 26 sealer의 근관 상아질과의 접착에 미치는 영향

김서경,황윤찬,황인남,오원만 大韓齒科保存學會 2008 Restorative Dentistry & Endodontics Vol.33 No.2

본 연구에서는 근관 세척법이 두 가지 근관 충전재 (Gutta-percha/AH 26 sealer, Resilon/Epiphany sealer)의 근관 상아질과의 접착메 미치는 영향을 평가하였다. 총 30개의 발거된 상악 전치를 각자 5개씩 6개의 군으로 분류하여 근관 성형을 하고 마지막 세척을 다음과 같이 시행 한 후 Gl, G2, G3군은 Gutta-percha/AH 26 sealer로, Rl, R2, R3군은 Resilon/Epiphany sealer로 근관 충전하였다. Gl, Rl군 : 5.25% NaOCl세척 G2, R2군 : 5.25% NaOCl세척 후 sterile saline 세척 G3, R3군 : 5.25% NaOCl세척 후 17% EDTA, sterile saline 순으로 세척 각 군의 충전된 치아를 아크릴 레진에 매몰하고 약 1 mm 두께로 절단한 후 만능 물성 시험기상에서 push-out bond strength를 측정하였고 실험 후 파절 양상을 Image-analyzing microscope으로 관찰하여 다음과 같을 결과를 얻었다. 1. Gutta-percha/AH 26 sealer 충전군에서 Resilon/Epiphany sealer 충전군보다 push-out bond strength가 높게 나타났다 (p < 0.05). 2. Resilon/Epiphany sealer 충전군 중 17% EDTA, sterile saline순으로 세척시 5.25% NaOCl 세척에 비해 push-out bond strength가 높게 나타났다 (p<0.05). 3.파절 양상을 분석시 모든 군은 접착성과 혼합성 파절 양상을 나타내었고, Gl, G2, Rl 군은 응집성 파절 양상이 나타나지 않았으며, Resilon/Epiphany sealer 충전군은 Gutta-percha/AH 26 sealer 충전군에 비해 응집성과 혼합성 파절 망상이 더 높은 비율로 나타났다. The purpose of this study was to evaluate whether intracanal irrigation method could affect the adhesion between intracanal dentin and root canal filling materials (Gutta-percha/AH 26 sealer and Resilon/Epiphany sealer). Thirty extracted human incisor teeth were prepared. Canals were irrigated with three different irrigation methods as a final rinse and obturated with two different canal filling materials (G groups : Gutta-percha/AH 26 sealer, R groups : Resilon/Epiphany sealer) respectively. Group Gl, Rl - irrigated with 5.25% NaOCl Group G2, R2 - irrigated with 5.25% NaOCl, sterile saline Group G3, R3 - irrigated with 5.25% NaOCl, 17% EDTA, stehle saline Thirty obturated roots were horizontally sliced and push-out bond strength test was performed in the universal testing machine. After test, the failure patterns of the specimens were observed using Image-analyzing microscope. The results were as follows. 1. Gutta-percha/AH 26 sealer groups had significantly higher push-out bond strength compared with the Resilon/Epiphany sealer groups (p < 0.05). 2. Push-out bond strength was higher when using 17% EDTA followed by sterile saline than using NaOCl as a final irrigation solution in the Resilon/Epiphany sealer groups (p < 0.05). 3. In the failure pattern analysis, there was no cohesive failure in Group Gl, G2, and Rl. Gutta-percha/AH 26 sealer groups appeared to exhibit predominantly adhesive and mixed failure patterns, whereas Resilon/Epiphany sealer groups exhibited mixed failures with the cohesive failure occurred within the Resilon substrate.

여름 고추육묘의 트라이졸계 처리에 의해 유기된 생육억제 해소에 관한 연구

채윤석,강호종,황서진 진주산업대학교 농업기술연구소 2007 農業技術硏究所報 Vol.20 No.-

고온기 고추육묘에 처리한 생장억제제 처리 효과 및 정식 후 생육억제를 회복하기 위하여 GA, 관수, 고온처리 효과에 대한 연구 결과는 다음과 같다. 1.생장억제제 트리아졸계 처리 횟수에 따라 초장 및 주경장은 뚜렷한 차이를 나타냈고 근장도 2회 처리를 함으로 1회 처리를 한 것보다 발달하지 않았다. 2. 왜화된 고추묘의 생육억제 해소에 미치는 영향은 초장 및 주경장의 생장에는 GA처리구가 뚜렷하였으나 다른 처리구는 비슷한 경향이었고 경경은 변화가 없었다. 3. 생육회복을 위한 처리별 생체 및 건물중은 정식 후 30일까지는 변화가 거의 없었으나 그 후 45일까지 급격히 증가하였는데 고온 및 관수처리구에서 뚜렷한 차이를 보였으며 45일 이후에는 모든 처리구에서 비슷한 경향을 보였다. 4. 정식 45일 경 처리구간 엽록소 함량은 GA처리구에서 가장 낮았으며 다른 처리구간에는 비슷했다. This study was carried out to find effects of restoration of hot pepper seedling dwarfed by the treatment of diniconazole by introducing GA₃, Irrigation and high temperature at knight and the results obtained are summarized as follows. The main results of this research are summarized as follows. 1. In the case of plant height and main stem hight treated with the first time and second time diniconazole showed the strongest effect than untreatment. The root length treated with diniconazole the first time effect gradually disappeared than the second time. 2. Sprays of GA₃100ppm to the dwarfed seedlings by diniconazole pretreatment were effective in counteracting the plant height and main stem height growth inhibition caused by diniconazole pretreatment. 3. The fresh and dry weight of pepper seedling were not significantly different untill 30days in planting, but were increased to 45days from 30days in planting. 4. The chlorophyll content were decreased more or less treatment of GA₃ 100ppm after 45days in planting.

근관 충전재 및 치근단 역충전재의 방사선 불투과성에 관한 비교 연구

김용상,김서경,황윤찬,황인남,오원만 大韓齒科保存學會 2008 Restorative Dentistry & Endodontics Vol.33 No.2

This study was performed to assess the radiopacity of a variety of canal filling and retrograde root-end filling materials according to the specification concerning root canal obturation materials. Ten materials including Gutta-percha pellets, amalgam, Fuji II LC, Dyract^(ⓡ) AP, Super EBA^(ⓡ), IRM^(ⓡ) AH 26^(ⓡ), Sealapex™, Tubli-Seal™ and dentin were evaluated in this study In the first part, densitometric reading of an each step of aluminum step wedge on occlusal film were performed at 60 kVp (0.2, 0.3, 0.4 s), 70 kVp (0.2, 0.3, 0.33 s) to decide appropriate voltage and exposure time. In the second part, ten specimens which are 5 ㎜ in diameter and 0.5, 1.0, 1.5, 2.0, 2.5, 3.0 ㎜ in thickness, were fabricated from each material studied. The specimens were radiographed simultaneously with an aluminum step wedge under decided condition (60 kVp, 0.2 s). The mean radiographic density values of the materials were transformed into radiopacity expressed equivalent thickness of aluminum (㎜ Al). The following results were obtained. 1. Among the various conditions including 0.2 s, 0.3 s, 0.4 s at 60 kVp and 0.2 s, 0.3 s, 0.33 s at 70 kVp, the appropriate voltage and exposure time that meet the requirement of density from 0.5 to 2.0 was 0.2 s at 60 kVp. 2. All of the materials in this study had greater radiopacity than the minimun level recommended by ISO No. 4049 standards. 3. Most of the materials had greater radiopacity than 3 ㎜ Al requirement of ANSI/ADA specification No. 57 (2000) and ISO No. 6876 (2001) standards except for Fuji II LC and Dyract. It suggests that all experimental canal filling and retrograde root-end filling materials have a Sufficient radiopacity that meet the requirement concerning root canal obturation materials except for Fuji II LC and Dyract. 본 실험에서는 다양한 방사선 노출 조건에 따른 aluminum step wedge에 대한 광학 밀도를 알아보고, 그 중 적절한 노출조건을 선택하여 수종의 근관 충전재와 치근단 역충전재의 방사선 불투과성 정도를 굉가, 비교하였다. 방사선 불투과성의 기준을 위해 11개의 step으로 구성된 aluminum step wedge를 제작하여 , 60 kVp, 70 kVp 관전압 상태에서 각각 0.2. 0.3, 0.4초와 0.2, 0.3, 0.33초의 노출시간으로 교합 필름상에서 방사선 촬영 후 적절한 노출 조건을 구하였다. 직경 5 ㎜,각각의 두께 0.5, 1.0, 1.5, 2.0, 2.5, 3.0 ㎜인 10종 (Gutta-percha, amalgam, Super EBA^(ⓡ), MTA, IRM^(ⓡ), Fuji II LC, Dyract^(ⓡ) AP, AH 26^(ⓡ), Sealapex^(ⓡ), Tubli-Sea™의 근관 충전재와 치근단 역충전재 시편을 각 재료와 두께당 10개씩 제작한 후, 동일한 두께의 상아질 시편 , aluminum step wedge와 함께 정해진 노출조건에 따라 방사선 촬영을 하였다. 모든 필름은 자동현상기로 현상하였다. 시편의 흑화도를 densitometer (Model 07-443, Victoreen Inc, Cleveland, Ohio, USA)로 5회 반복 측정 후, 평균값을 구하여 회귀분석 후 알루미늄 두께로 환산하였다. 얻어진 정보를 분석하여 다음의 결과를 얻었다. 1. 관전압 60 kVp에서 노출시간 0.2, 0.3, 0.4초, 70 kVp에서 0.2, 0.3, 0.33초로 변화를 주어 방사선 촬영을 하였을 때, 흑화도가 0.5 - 2.5 사이여야 한다는 ISO No. 6876 규격에 가장 적합한 것은 60 kVp, 0.2초일 경우였다. 2.측정된 근관 충전재와 치근단 역충전재들의 방사선 불투과성 모두 ISO No. 4049 규격에 적합하였다. 3.광중합형 글래스 아이오노머 (Fuji II LC)와 컴포머 (Dyract)를 제외하고는 ANSI/ADA specification (2000) 또는 ISO No. 6876 (2001)규격이 제시한 최소한 3 ㎜ Al 이상의 방사선 불투과성을 지녀야 한다는 규격에 적합하였다. 이상의 결과는 본 실험에 사용된 수종의 근관 충전재와 치근단 역충전재 중 Fuji Ⅱ LC와 Dyract를 제외하고 모두 규격에 적합한 방사선 불투과성을 가지고 있음을 시사한다.

근관 전색재의 방사선 불투과성에 관한 비교연구

김태민,김서경,황인남,황윤찬,강병철,윤숙자,이재서,오원만 대한치과보존학회 2009 Restorative Dentistry & Endodontics Vol.34 No.1

This study was performed to assess the radiopacity of a variety of root canal sealers according to the Specification concerning root canal sealers. Ten materials including Tubli-Seal™, Kerr Pulp Canal Sealer™, AH 26^(R), AH plus^(R), AH plus jet™, Ad seal™, Sealapex™, NOGENOU™, ZOB seal™, Epiphany™, and dentin were evaluated in this study. In the first part. densitometric reading of an each step of aluminum step wedge on occlusal film was performed at different voltage and exposure time. In the second part, ten specimens were radiographed simultaneously with an aluminum step wedges on the occlusal films under decided condition. The mean radiographic density values of the materials were transformed into radiopacity expressed equivalent thickness of aluminum (mm Al). The following results were obtained 1 Among the various conditions, the appropriate voltage and exposure time that meet the requirement density was 60 kVp at 0.2 s 2 All of the materials had greater radiopacity than 3 mm Al requirement of ANSI/ADA specification No. 57 (2000) and ISO No. 6876 (2001) standards. 3 The radiopacity of materials increased as thickness of materials increased. 4 The mm Al value of each specimen at 1mm in thickness has a significant difference in the statistics. It suggests that root canal sealers have a sufficient radiopacity that meet the requirement. 다양한 근관전색제는 방사선 사진상 주위 해부학적 구조와 구별될 만한 방사선 불투과성을 나타내야 한다 따라서 이런 물질들이 근관에 충전될 때의 방사선 불투과성 정도를 평가해야 할 필요성이 대두되고 있다. 본 실험에서는 다양한 근관전색제들의 방사선 불투과성을 평가하고자, 방사선 노출조건에 따른 aluminium step wedge에 대한 광학 밀도를 알아보고, 그 중 적절한 노출조건을 선택하여 수종의 근관 전색재의 방사선 불투과성 정도를 알루미늄 두께로 환산하여 비교해 보고자 한다. 방사선 불투과성의 기준을 위해 11개의 step으로 구성된 aluminum step wedge을 사용하여, 60kVP, 70kVp관전압 상태에서 각각 0.2, 0.3, 0.4초 그리고 0.2, 0.3, 0.33초의 꼭 노출시간으로 교합필름상에서 방사선 촬영후 적절한 노출 조건을 구하였다. 직경 5mm 각각의 두께 0.5, 1.0, 1.5, 2.0, 2.5, 3.0 mm인 10종 (Tubli-Seal™, Kerr pulp Canal Sealer™, AH26^(R), AHplus^(R), AH plus jet starter kit™, Ad seal™, Sealapex™, Nogenol root canal sealer™, ZOB seal™, Epiphany™)의 근관전색재 시편을 각 재료와 두께당 10개씩 제작한 후, 동일한 두께의 상아질 시편, aluminum step wedge와 함께 정해진 노출시간에 따라 방사선 촬영을 하였다. 모든 필름은 자동현상기로 현상하였다. 시편의 방사선 흑화도를 densitometer로 5회 반복 측정 후, 평균값을 구하여 알루미눔 두께로 환산하였다.얻어진 정보를 분석하여 다음의 결과를 얻었다. 1 관전압 60 kVp에서 노출시간 0.2, 0.3, 0.4초, 70 kVp에서 0.2, 0.3, 0.33초로 변화를 주어 방사선 촬영을 하였을 때 흑화도가 ISO No. 6876 규격에 가장 적합한 것은 60 kVP, 0.2초 일 경우였다. 2 측정된 근관 전색제의 방사선 불투과성은 2.29 mm Al (N0GEN0L)로부터 13.69 mm Al (AH Plus jet)까지 다양하게 나타났으나, 모두 ANSI/ADA specification (2000) 또는 ISO No. 6876 (2001) 규격이 제시한 최소한 3mm Al 이상의 방사선 불투과성을 지녀야 한다는 기준에 적합하였다. 3 재료의 두께가 증가할수록 방사선 불투과성은 증가하지만, 정비례하지는 않았다. 4 각 실험재료의 1 mm 두께의 시편에 대한 mm Al값들은 통계적으로 유의한 차이가 있었다. 이상의 결과는 본 실험에 사용된 수종의 근관 전색재는 모든 규격에 적합한 방사선 불투과성을 가지고 있음을 시사한다.

소목(Caesalpinia sappan) 추출물의 Streptococcus mutans에 대한 성장, 산생성, 부착 및 비수용성 글루칸 합성 억제에 미치는 영향

유용욱,유현희,김윤정,유미선,서세정,이황,이흥수 대한구강보건학회 2003 大韓口腔保健學會誌 Vol.27 No.2

Streptococcus mutans is known as the causative bacterial playing the most important role in forming plaque and it is being noticed as major causative bacteria of dental caries. Therefore, development of more effective, substantial and safe preventive agent against dental caries and periodontal disease is honestly required. The present study was designed to investigate the effect of chloroform extract(CE), n-butanol extract(BE),methanol extract(ME) and water extract(WE) of Caesalpinia on the growth, acid production, adhesion, and insoluble glucan synthesis of Streptococcus mutans. The CE, BE, ME and WE decreased the growth and acid production of S.mutans than that of control, especially, the ME was more effective than other extracts. The effect of CE, BE, ME and WE on the adherences to saliva-coated hydroxyapatite bead(S-HA) were evaluated. At the concentration of 2,000 ㎍/㎖, the CE showed 32% rate of bacterial adherence to S-HA, whereas, other extracts of the same concentration producedgreater than 50% rate. The CE and BE were significantly decreased the reduction rates of water insoluble glucan formation from sucrose by crude glucosyltransferase of S.mutans. Thus, the application of C. sappan can be considered a useful and a practical method for the prevention of dental caries.

랫드에서 미생탕의 4주 반복투여독성

김태명, 류재면, 서임권, 박동선, 조정희, 장용훈, 김윤배, 황석연 충북대학교 동물의학연구소 2009 Journal of Biomedical and Translational Research Vol.10 No.1

본문참고

생활치 미백제가 우치 법랑질의 투명도에 미치는 영향

김동준,김영주,김학근,박은종,서은주,황윤찬,오원만,황인남 大韓齒科保存學會 2005 Restorative Dentistry & Endodontics Vol.30 No.3

본 연구에서는 현재 임상에서 home bleaching을 위해 사용되고 있는 표백 재료들이 치아 법랑질의 투명도에 어떠한 변화를 일으키는지 고찰해 보고자 시행하였다. 실험 대상으로는 하루 전 발거한 우치 (bovine tooth)를 사용하였다. 치아의 순면에 수직되게 다이아몬드 드릴을 이용해 수주 하에서 직경 6 mm의 원통형 치아 시편을 만들어 순면이 노출된 상태로 투명한 아크릭 레진에 포매한 후, low speed diamond saw (Isomat, Buehler Co., USA)를 사용하여 1.2 mm 두께로 절단하였다. 절단된 시편은 순면을 먼저 편평하게 연마하고,절단된 면을 연마하여 두께 1 mm의 시편을 완성하였다. 완성된 시편(우치 25개)을 무작위로 추출하여 3개의 그룹으로 나누고 나머지는 대조군으로 하였다. Opalescence (10% carbamide peroxide, Ultradent, Milford, USA), Rembrandt (10% carbamide peroxide, DenMat, USA) 및 Opalescence F(15% carbamide peroxide with fluoride, Ultradent)를 시편의 순면에 1주일 동안 적용 (표백제는 24시간마다 교체)하였고, 설측면은 증류수를 적신 거즈에 접촉된 상태로 보관하였다 표백제를 적용하기 전과 적용 3, 5, 7일째에 시편의 삼자극치 X, Y, Z 값을 색채색차계 (Color & Color Differencemeter, Model TC-6FX, Tokyo Denshoku Co., Japan)로 백색 배경판과 흑색 배경판 상에서 측정하였다 백색 배경판과 흑색 배경판 상에서 측정된 Y값의 평균값을 이용해 contrast ratio를 계산하였다 얻어진 값을 One Way Repeated Measured ANOVA를 이용하여 통계 처리한 결과 10% Opalescence처치군, 15% Opalescence-F처치군 및 대조군에서는 통계적으로 유의할만한 증감을 보이지 않았고, Rembrandt처치군에서는 Contrast ratio가 증가하였다 (p < 0.01) . This study was done to evaluate whether vital bleaching agents could influence on the translucency of the bovine enamel. The anterior bovine teeth that were extracted one day before and without any gross discoloration were obtained and then were preserved in physiologic saline. 6 mm cylindrical tooth specimens were fabricated with diamond puncher perpendicularly on labial surface of bovine tooth. After embedded in transparent acrylic resin with labial surface being exposed, they were cut to a thickness of 1.2 mm with low speed diamond saw (Isomat, Buehler Co., Lake Bluff, IL, USA). They were smoothly ground to 1 mm thickness of enamel with sandpaper. 24 specimens were randomly divided into 3 groups and control group respectively. Opalescence (10% carbamide peroxide, Ultradent, South Jordan, USA), Rembrandt (10% carbamide peroxide, DenMat, USA) and Opalescence F (15% carbamide peroxide with fluoride, Ultradent, USA) were applied on labial sides of the bovine enamel for 7 days (bleaching agents were reapplied every 24 hours) and the opposite surface was contacted to cotton that soaked in distilled water. The control group was soaked in distilled water. Three stimulus value X, Y and Z were evaluated with colorimeter (Color ' Color Differencerneter, Model TC-6FX, Tokyo Denshoku Co., Japan) on the labial surface of all specimen three times on white and black background plate before the bleaching agents were applied and on 3rd, 5th and 7th day after applied. The degree of translucency was normally assessed by measuring the inverse property, opacity (contrast ratio). 10% Opalescence, 15% Opalescence-F, and control group showed no significant variation in the translucency of bovine enamel, However Rembrandt decreased the translucency of it (p < 0.01).

Black ginseng derivatives suppress heat stress-induced apoptosis in a hippocampal neuronal cell line

Seo-Yun Choi,Ji-Hyeon Song,Sungwoo Chei,Eun-Jeong Koh,Jia Choi,Young-Jin Seo,Ji-Hyun Hwang,Yeon-Joo Lee,Byung Wook Yang,Jong Dae Park,Boo-Yong Lee 한국식품영양과학회 2016 한국식품영양과학회 학술대회발표집 Vol.2016 No.10

Epigenetics: general characteristics and implications for oral health

Seo, Ji-Yun,Park, Yoon-Jung,Yi, Young-Ah,Hwang, Ji-Yun,Lee, In-Bog,Cho, Byeong-Hoon,Son, Ho-Hyun,Seo, Deog-Gyu The Korean Academy of Conservative Dentistry 2015 Restorative Dentistry & Endodontics Vol.40 No.1

Genetic information such as DNA sequences has been limited to fully explain mechanisms of gene regulation and disease process. Epigenetic mechanisms, which include DNA methylation, histone modification and non-coding RNAs, can regulate gene expression and affect progression of disease. Although studies focused on epigenetics are being actively investigated in the field of medicine and biology, epigenetics in dental research is at the early stages. However, studies on epigenetics in dentistry deserve attention because epigenetic mechanisms play important roles in gene expression during tooth development and may affect oral diseases. In addition, understanding of epigenetic alteration is important for developing new therapeutic methods. This review article aims to outline the general features of epigenetic mechanisms and describe its future implications in the field of dentistry.

The relationship between a nursing students personality, self-directed learning ability, and academic achievement

Ye-won Yun,Yun-kyung Kim,Hye-jung Yun,Jin Lee,Seo-young Jang,Seong-a Hong,Seo-young Hwang,Se-hyun Lim 한국성인간호학회 2021 성인간호학회 학술대회 Vol.2021 No.8

Aim(s): The purpose of this study is to identify a significant relationship between the five personality factors, self-directed learning ability, and academic achievement, focusing on college students majoring in nursing. Method(s): This study was conducted through a descriptive correlational study to examine the relationship between personality, self-directed learning ability, and academic achievement of 268 nursing student in 4-year K University in chungbuk. A t-test, one-way ANOVA and cross-analysis were conducted to investigate the differences in the characteristics of the five personality factors, self-directed learning ability, and academic achievement according to gender and grade. To investigate the relationship between the types of personality 5 factors and self-directed learning ability, one-way ANOVA and correlation test were performed. Cross-analysis was performed to examine the relationship between the five personality factor types and academic achievement, and one-way ANOVA was performed to examine the relationship between academic achievement and self-directed learning ability. Result(s): The results of this study showed that the difference in self-directed learning ability between the types of personality 5 factors was significant in the learning situation (F=2.529, p=0.042). In addition, the differences between academic achievement and self-directed learning ability were found to be learning motivation [F=33.166, p=0.000], self-awareness [F=16.638, p=0.000], and learning strategy [F=26.394, p=0.000]. Finally, the relationship between the type of personality 5 factors and academic achievement was not significant as =14.887, p=0.061. Conclusion(s): As a result of this study, it was found that the more conscientious the students, the more help to increase the self-directed learning ability. In addition, it was found that there is no relationship between the 5 personality factors and academic achievement because the relative academic achievement cannot be known as the first semester of 2020 is made as an absolute evaluation due to COVID-19. The higher the academic achievement, the higher the score of self-directed learning ability, indicating that there is a relationship between academic achievement and self-directed learning ability.