서울특별시내 하기(夏期)모기의 분포상태

김용상,이호왕 대한미생물학회 1976 大韓微生物學會誌 Vol.11 No.1

It has been known that there are more than 50 species of mosquitoes in Korea but little study was done on distribution of summer mosquitoes species in Seoul. The author collected and investigated the species and seasonal distribution of mosquitoes in Seoul from 1967 to 1972 1) The most abundant species of summer mosquitoe was A. vexans nipponii, 30~70% of total mosquito population. 2) The next abundant species was C. pipiens but there was wide frequencies according to different years. 3) C. tritaeniorhynchus, the vector of Japanese encephalities, was third in order, possesed about 9% of total mosquitoe popuiation every year and reached peak in August and September. 4) It was found that there were 7 species of mosquitoes commonly in Seoul City.

Evaluation of Corrosion Fatigue and Life Prediction of Lower Arm for Automotive Suspension Component

김용상,김정구 대한금속·재료학회 2017 METALS AND MATERIALS International Vol.23 No.1

Lower arm is one of the suspension components of automobile. It is suffered from driving vibration and corrosive environment, namely corrosion fatigue. In this study, corrosion fatigue property of lower arm was investigated, and a modified model based on Palmgren-Miner rule was developed to predict the lifetimes of corrosion fatigue. The corrosion fatigue life of lower arm was about 1/6 times shorter than fatigue life. Based on the results of corrosion fatigue tests and meteorological data in Seoul and Halifax, the corrosion fatigue life of lower arm was predicted. The satisfaction of 10-year and 300,000 km warranty was dominated by the climate of automobile driving. This prediction indicates that the weather condition or driving condition influences the life of automotive parts. Therefore, to determine the warranty of automotive parts, the driving condition has to be carefully considered.

근관 충전재 및 치근단 역충전재의 방사선 불투과성에 관한 비교 연구

김용상,김서경,황윤찬,황인남,오원만 大韓齒科保存學會 2008 Restorative Dentistry & Endodontics Vol.33 No.2

This study was performed to assess the radiopacity of a variety of canal filling and retrograde root-end filling materials according to the specification concerning root canal obturation materials. Ten materials including Gutta-percha pellets, amalgam, Fuji II LC, Dyract^(ⓡ) AP, Super EBA^(ⓡ), IRM^(ⓡ) AH 26^(ⓡ), Sealapex™, Tubli-Seal™ and dentin were evaluated in this study In the first part, densitometric reading of an each step of aluminum step wedge on occlusal film were performed at 60 kVp (0.2, 0.3, 0.4 s), 70 kVp (0.2, 0.3, 0.33 s) to decide appropriate voltage and exposure time. In the second part, ten specimens which are 5 ㎜ in diameter and 0.5, 1.0, 1.5, 2.0, 2.5, 3.0 ㎜ in thickness, were fabricated from each material studied. The specimens were radiographed simultaneously with an aluminum step wedge under decided condition (60 kVp, 0.2 s). The mean radiographic density values of the materials were transformed into radiopacity expressed equivalent thickness of aluminum (㎜ Al). The following results were obtained. 1. Among the various conditions including 0.2 s, 0.3 s, 0.4 s at 60 kVp and 0.2 s, 0.3 s, 0.33 s at 70 kVp, the appropriate voltage and exposure time that meet the requirement of density from 0.5 to 2.0 was 0.2 s at 60 kVp. 2. All of the materials in this study had greater radiopacity than the minimun level recommended by ISO No. 4049 standards. 3. Most of the materials had greater radiopacity than 3 ㎜ Al requirement of ANSI/ADA specification No. 57 (2000) and ISO No. 6876 (2001) standards except for Fuji II LC and Dyract. It suggests that all experimental canal filling and retrograde root-end filling materials have a Sufficient radiopacity that meet the requirement concerning root canal obturation materials except for Fuji II LC and Dyract. 본 실험에서는 다양한 방사선 노출 조건에 따른 aluminum step wedge에 대한 광학 밀도를 알아보고, 그 중 적절한 노출조건을 선택하여 수종의 근관 충전재와 치근단 역충전재의 방사선 불투과성 정도를 굉가, 비교하였다. 방사선 불투과성의 기준을 위해 11개의 step으로 구성된 aluminum step wedge를 제작하여 , 60 kVp, 70 kVp 관전압 상태에서 각각 0.2. 0.3, 0.4초와 0.2, 0.3, 0.33초의 노출시간으로 교합 필름상에서 방사선 촬영 후 적절한 노출 조건을 구하였다. 직경 5 ㎜,각각의 두께 0.5, 1.0, 1.5, 2.0, 2.5, 3.0 ㎜인 10종 (Gutta-percha, amalgam, Super EBA^(ⓡ), MTA, IRM^(ⓡ), Fuji II LC, Dyract^(ⓡ) AP, AH 26^(ⓡ), Sealapex^(ⓡ), Tubli-Sea™의 근관 충전재와 치근단 역충전재 시편을 각 재료와 두께당 10개씩 제작한 후, 동일한 두께의 상아질 시편 , aluminum step wedge와 함께 정해진 노출조건에 따라 방사선 촬영을 하였다. 모든 필름은 자동현상기로 현상하였다. 시편의 흑화도를 densitometer (Model 07-443, Victoreen Inc, Cleveland, Ohio, USA)로 5회 반복 측정 후, 평균값을 구하여 회귀분석 후 알루미늄 두께로 환산하였다. 얻어진 정보를 분석하여 다음의 결과를 얻었다. 1. 관전압 60 kVp에서 노출시간 0.2, 0.3, 0.4초, 70 kVp에서 0.2, 0.3, 0.33초로 변화를 주어 방사선 촬영을 하였을 때, 흑화도가 0.5 - 2.5 사이여야 한다는 ISO No. 6876 규격에 가장 적합한 것은 60 kVp, 0.2초일 경우였다. 2.측정된 근관 충전재와 치근단 역충전재들의 방사선 불투과성 모두 ISO No. 4049 규격에 적합하였다. 3.광중합형 글래스 아이오노머 (Fuji II LC)와 컴포머 (Dyract)를 제외하고는 ANSI/ADA specification (2000) 또는 ISO No. 6876 (2001)규격이 제시한 최소한 3 ㎜ Al 이상의 방사선 불투과성을 지녀야 한다는 규격에 적합하였다. 이상의 결과는 본 실험에 사용된 수종의 근관 충전재와 치근단 역충전재 중 Fuji Ⅱ LC와 Dyract를 제외하고 모두 규격에 적합한 방사선 불투과성을 가지고 있음을 시사한다.

광 CVD에 의한 비정질 실리콘 박막 특성 향상

김용상,이성규,전명철,박진석,한민구 한국전기전자재료학회 1994 전기전자재료학회지 Vol.7 No.2

The purpose of this work is to investigate the interface characteristics of hydrogenated amorphous silicon thin films prepared by PECVD and photo-induced CVD and to examine the annealing effects of ultraviolet irradiation on hydrogenated amorphous silicon thin films which were degraded by visible light illumination. The interface layer thickness of films deposited by photo-induced CVD was about 600-900.angs. while that by PECVD was about 1000-1300.angs.. These results can show that the quality of interface layer in photo induced CVD film is better than that in PECVD sample. The electrical properties are improved by ultraviolet irradiation on visible light soaked a-Si:H films using photo-CVD light sources, probably due to the fact that UV generates phonons in a-Si:H films and anneal the meta stable defects.

고상 결정화에 의해 제작된 다결정 실리콘 박막의 특성 연구

김용상 한국전기전자재료학회 1997 전기전자재료학회지 Vol.10 No.8

Poly-Si films have been prepared by solid phase crystallization of LPCVD(low-pressure CVD) amorphous silicon. The crystallinity of poly-Si films has been derived from UV reflectance spectrum and lies in the range between 70% and 80% . From XRD measurement the peak at 28.2$^{\circ}$from (111) plane is dominantly detected in the SPC poly-Si films, The average grain size of poly-Si film is determined by the image of SEM and varies from 4000 $\AA$ to 8000$\AA$. The electrical conductivity of as-deposited amorphous silicon film is about 2.5$\times$10$^{-7}$ ($\Omega$.cm)$^{-1}$ , and 3~4$\times$10$^{-6}$ ($\Omega$.cm)$^{-1}$ of room temperature conductivity is the SPC poly-Si films. The conductivity activation energies are 0.5~0.6 eV or the 500$\AA$-thick poly-Si films.

般若의 지혜로 본 “觀光”의 뜻

김용상 관광경영학회 2018 관광경영연구 Vol.83 No.-

This thesis is studied on the meaning of Kwan-Kwang(觀光) concept as seen by Prajna(般若). The term of “tourism(觀光)” originating from Kwankukjikwang(觀國之光) is used as a means of suppressing the opponent or the forestallment, as in the case of ‘kwankwangbonaeda(get rid of him)’, ‘gae-kwankwang’, ‘youk-kwankwang’. Touristification has been an issue for a long time. As such, the term “tourism(觀光)” is used in a variety of ways, from traditional meaning to netizens' slang. Considering the meaning of ‘sightseeing(觀光)’ consisting of ‘seeing(觀)’ and ‘light(光)’, it seems to be a natural consequence, but the use of the sight is merely focused on the business and economic meaning, the socio-cultural meaning is fading. Therefore, this paper attempted to recall the true meaning of ‘tourism(觀光)’ in the wisdom of ‘Prajna(般若)’. There are huge research papers all over the world in one year, but there is no one about absolute eternal life. People always seek the object of love, and the person with great minds does not stay in the opponent's world, but has to go to the world to have Jinsunmi(眞善美). ‘觀(seeing)’ has the metaphysical means, and ‘光(light)’ means ‘light without number’. Not everyone can do it, but anyone can think it.

족근관절 연부조직 충돌 증후군

김용상,김범수,이진우,Kim, Y.S.,Kim, B.S.,Lee, Jin-Woo 대한관절경학회 2009 대한관절경학회지 Vol.13 No.3

육가공업계에서 HACCP 시행의 중요성

김용상,Kim, Yong-Sang 한국육가공협회 2002 肉加工 Vol.25 No.-

전산해석을 통한 지역난방시스템 열수송 강관의 용접부 부식에 따른 응력분포 및 응력확대계수 평가

김용상,김우철,김정구 한국에너지학회 2018 한국에너지공학회 학술발표회 Vol.2018 No.04

제주 지역에 적합한 중규모 단시간 예측 시스템의 개발

김용상,최준태,이용희,오재호,Kim, Yong-Sang,Choi, Jun-Tae,Lee, Yong-Hee,Oh, Jai-Ho 한국지구과학회 2001 한국지구과학회지 Vol.22 No.3

The operational meso-scale short range NWP system was developed for Cheju Regional Meteorological Office located at Cheju island, Korea. The Central Meteorological Service Center, KMA has reported the information on numerical weather prediction every 12 hours. But this information is not enough to determine the detail forecast for the regional meteorological office because the terrain of the Korean peninsula is very complex and the resolution of the numerical model provided by KMA headquarter is too coarse to resolve the local severe weather system such as heavy rainfall. LAPS and MM5 models were chosen for three-dimentional data assimilation and numerical weather prediction tools respectively. LAPS was designed to provide the initial data to all regional numerical prediction models including MM5. Synoptic observational data from GTS, satellite brightness temperature data from GMS-5 and the composite reflectivity data from 5 radar sites were used in the LAPS data assimilation for producing the initial data. MM5 was performed on PC-cluster based on 16 pentium CPUs which was one of the cheapest distributed parallel computer in these days. We named this system as Halla Short Range Prediction System (HSRPS). HSRPS was verified by heavy rainfall case in July 9, 1999, it showed that HSRPS well resolved local severe weather which was not simulated by 30 km MM5/KMA. Especially, the structure of rainfall amount was very close to the corresponding observation. HSRPS will be operating every 6 hours in the Cheju Regional Meteorological Office from April 2000.