A New Theory for Acupuncture: Promoting Robust Regulation

Yuan Xu,Yang Guo,Yuru Song,Kuo Zhang,Yiping Zhang,Qiang Li,Shouhai Hong,Yangyang Liu,Yi Guo 사단법인약침학회 2018 Journal of Acupuncture & Meridian Studies Vol.11 No.1

Robustness, an ability of biological networks to uphold their functionalities in the face of perturbations, is a key characteristic of all living systems. Acupuncture is a procedure in which fine needles are inserted into an individual at discrete points and then manipulated, with the intent of preventing and curing diseases. Acupuncture does not directly eliminate pathogenic factors or pathological tissue; rather, acupuncture enhances the ability of the human body to self-medicate itself by activating complex regulatory systems and by maintaining physiological homeostasis to prevent or treat diseases. From this point of view, the effect of acupuncture on the human body is more likely a kind of regulation to promote robustness. That is to say, acupuncture has the ability to promote robustness. In this article, we review the properties and functions of acupuncture in preventing and treating diseases and in maintaining health by enhancing robustness.

Selective Removal of Al(III) from Rare Earth Solutions Using Peas-based Activated Carbon

Fu-Qiang An,Rui-Yan Wu,Zhi-Guo Yuan,Tuo-Ping Hu,Jian-Feng Gao 대한화학회 2017 대한화학회지 Vol.61 No.5

Efficiently removing Al(III) from rare earth is very significant because even trace amount of Al(III) can cause serious harm to the rare earth materials. In this paper, a nitrogen-containing activated carbon, AC-P700, was synthesized using peas as raw materials. The AC-P700 was characterized by surface area analyzer, FT-IR, and XPS methods. The adsorption and recognition properties of AC-P700 towards Al(III) were investigated, and the recognition mechanism was also analyzed. The BET special surface area of AC-P700 was 1277.1 m2·g−1, and the average pore diameter was 1.90 nm. The AC-P700 possesses strong adsorption affinity and excellent recognition selectivity towards Al(III). The adsorption capacity for Al(III) could reach to 0.53 mmol·g−1, and relative selectivity coefficients relative to La(III) and Ce(III) is 9.6 and 8.7, respectively. Besides, ACP700 possesses better regeneration ability and reusability.

Profile of disposition, tissue distribution and excretion of the novel anti-human immunodeficiency virus (HIV) agent W-1 in rats

Ying-Yuan Lu,Xiao-Wei Wang,Xin Wang,Wen-Bing Dai,Qiang Zhang,Pu Li,Ya-Qing Lou,Chuang Lu,Jun-Yi Liu,Guo-Liang Zhang 대한약학회 2016 Archives of Pharmacal Research Vol.39 No.7

The purpose of this study was to characterize the disposition, distribution, excretion and plasma protein binding of 6-benzyl-1-benzyloxymethyl-5-iodouracil (W- 1) in rats. Concentrations of W-1 within biological samples were determined using a validated high performance liquid chromatography method. The plasma protein binding of W-1 was examined by equilibrium dialysis method. After oral administration of W-1 (50, 100 and 200 mg/kg, respectively) in self-microemulsifying drug delivery system formulation, the pharmacokinetic parameters of W-1 were as follows: the peak plasma concentrations (Cmax) were 0.42, 1.50 and 2.55 μg/mL, the area under the curve (AUC0-t) were 0.89, 2.27 and 3.96 lg/h mL and the plasma half-life (t1/2) were 5.15, 3.77 and 3.77 h, respectively. Moreover, the prototype of W-1 was rapidly and extensively distributed into fifteen tissues, especially higher concentrations were detected in intestine, stomach and liver, respectively. The plasma protein binding of W-1 in rat, beagle dog and human were in the range of 97.96–99.13 %. This study suggested that W-1 has an appropriate pharmacokinetics in rats, such as rapid absorption, moderate clearance, and rapid distribution to multiple tissues. Those properties provide important information for further development W-1 as an anti-HIV-1 drug candidate.

Selective Removal of Al(III) from Rare Earth Solutions Using Peas-based Activated Carbon

An, Fu-Qiang,Wu, Rui-Yan,Li, Min,Yuan, Zhi-Guo,Hu, Tuo-Ping,Gao, Jian-Feng Korean Chemical Society 2017 대한화학회지 Vol.61 No.5

Efficiently removing Al(III) from rare earth is very significant because even trace amount of Al(III) can cause serious harm to the rare earth materials. In this paper, a nitrogen-containing activated carbon, AC-P700, was synthesized using peas as raw materials. The AC-P700 was characterized by surface area analyzer, FT-IR, and XPS methods. The adsorption and recognition properties of AC-P700 towards Al(III) were investigated, and the recognition mechanism was also analyzed. The BET special surface area of AC-P700 was $1277.1m^2{\cdot}g^{-1}$, and the average pore diameter was 1.90 nm. The AC-P700 possesses strong adsorption affinity and excellent recognition selectivity towards Al(III). The adsorption capacity for Al(III) could reach to $0.53mmol{\cdot}g^{-1}$, and relative selectivity coefficients relative to La(III) and Ce(III) is 9.6 and 8.7, respectively. Besides, AC-P700 possesses better regeneration ability and reusability.

Orthogonal 방법을 통한 Poly(AM-DMDAAC)/MMT 고흡수성나노복합체 제조 연구

Jun Dong Yuan,Ming Zhou,Shuang Qiao Yang,Yong Guo Zhou,Nan Qin,Song Tao He,Dong Lai,Zhong Qiang Xie 한국고분자학회 2014 폴리머 Vol.38 No.1

A novel poly(AM-DMDAAC)/MMT superabsorbent nanocomposites are prepared by radical polymerizationusing ammonium persulfate (APS) and anhydrous sodium sulfite as a free radical initiator and N,N-methylene bisacrylamide(MBA) as a crosslinker. In this paper, an optimization study on the synthesis of superabsorbent nanocompositesis carried out. Orthogonal array experiment indicates that the optimized conditions is acrylamide (AM) content 23 wt%,diallyl dimethyl ammonium chloride (DMDAAAC) content 6 wt%, montmorillonite (MMT) content 4 wt%, initiatorcontent 0.2 wt% and crosslinker content 0.02 wt%. Under the optimization syntheses conditions concluded, the maximumwater absorbency in distilled water is 659.53 g·g-1 and in 2 wt% sodium chloride solution is 116.25 g·g-1. Compared withthe range values of different factors (Rj), the order of significance factors in distilled water is C (MMT) > B (DMDAAC)> A (AM) > D (crosslinker) > E (initiator). MMT is intercalated during polymerization reaction and a nanocompositestructure is formed as shown by TEM analysis and XRD analysis.

Gossypol acetic acid induces apoptosis in RAW264.7 cells via a caspase-dependent mitochondrial signaling pathway

Sijun Deng,Hui Yuan,Jine Yi,Yin Lu,Qiang Wei,Chengzhi Guo,Jing Wu,Zuping He,Li-yun Yuan 대한수의학회 2013 Journal of Veterinary Science Vol.14 No.3

To investigate the effects of gossypol acetic acid (GA) on proliferation and apoptosis of the macrophage cell line RAW264.7 and further understand the possible underlying mechanism responsible for GA-induced cell apoptosis,RAW264.7 cells were treated with GA (25∼35 μmol/L) for 24h and the cytotoxicity was determined by MTT assay, while apoptotic cells were identified by TUNEL assay, acridine orange/ethidium bromide staining and flow cytometry. Moreover, mitochondrial membrane potential (ΔΨ m) with Rhodamine 123 and reactive oxygen species (ROS) with DCFH-DA were analyzed by fluorescence spectrofluorometry. In addition, the expression of caspase-3 and caspase-9 was assessed by Western Blot assay. Finally, the GA-induced cell apoptosis was evaluated by flow cytometry in the present of caspase inhibitors Z-VAD-FMK and Ac-LEHD-FMK,respectively. GA significantly inhibited the proliferation of RAW264.7 cells in a dose-dependent manner, and caused obvious cell apoptosis and a loss of ΔΨ m in RAW264.7 cells. Moreover, the ROS production in cells was elevated, and the levels of activated caspase-3 and caspase-9 were up-regulated in a dose-dependent manner. Notably, GA-induced cell apoptosis was markedly inhibited by caspase inhibitors. These results suggest that GA-induced RAW264.7 cell apoptosis may be mediated via a caspase-dependent mitochondrial signaling pathway.

DISPERSION OF CARBON NANOFIBERS IN AQUEOUS SOLUTION

BAO-MIN WANG,YUAN ZHANG,ZHI-QIANG GUO,YU HAN,HAI-NAN MA 성균관대학교(자연과학캠퍼스) 성균나노과학기술원 2012 NANO Vol.7 No.6

Carbon nano¯bers (CNFs) were puri¯ed by the method of heat treating, and stable homogeneous suspensions of heat-treated CNFs were prepared by using methylcellulose (MC) as a surfactant. The heat-treated CNFs were characterized by di®erential thermal analysis (DTA) and thermogravimetry analysis (TGA), and the sonication-driven dispersion of CNFs in aqueous solution was investigated by measuring ultraviolet absorbency (UV absorbency), zeta potential, adsorption isotherm of MC on CNFs and surface tension of CNF suspensions. In these CNF suspensions, the zeta potentials of CNFs progressively increase with increasing MC concentration, and change from ?15.4?0 mV. The surface tension of CNF suspensions decrease from 38.87mN/m to 36.54mN/m. The adsorption isotherm of MC on CNFs shows an adsorption platform (namely \L" style), and the adsorption isotherm reaches the saturation plateau at MC concentration of about 0.4 g/L. All results show that the optimum concentration ratio of MC to CNFs is 2:1 for dispersion.

Relationship Between PTEN and Livin Expression and Malignancy of Renal Cell Carcinomas

Cheng, Tao,Zhang, Jian-Guo,Cheng, Yuan-He,Gao, Zhong-Wei,Ren, Xiao-Qiang Asian Pacific Journal of Cancer Prevention 2012 Asian Pacific journal of cancer prevention Vol.13 No.6

Objectives: This study focused on PTEN and Livin expression and associations with malignancy in human renal clear cell carcinomas (RCCC). Methods: PTEN and Livin expression was assessed in 100 RCCC tissue samples, 50 paracarcinoma cases, and 20 normal renal tissue samples using the immunohistochemical Streptavidin proxidase (SP) method. The relationships between binding and corresponding biological characteristics, such as histological grade, lymph node metastases, and clinical stages were analyzed. Results: Positive PTEN expression in RCCC was significantly lower than in renal tissue adjacent to carcinoma tissue and normal renal tissue (P<0.01). Livin expression in the renal tissue adjacent to the carcinoma and normal renal tissues exhibited only low levels, whereas overall Livin expression in RCCC was statistically significant (P<0.01). In RCCC, PTEN expression rate gradually decreased with an increase in clinical stage, whereas that of Livin increased to statistically significant levels (P<0.01), PTEN and Livin levels being negatively correlated (r=-0.395, P<0.01). Conclusions: PTEN and Livin are important in RCCC development. The two factors combined are expected to provide indices for estimating RCCC malignancy and progression levels, as well as references for RCCC diagnosis and treatment.

An Efficient Parallel Infilling Strategy and Its Application in Sheet Metal Forming

Yan-Min Xie,Yuan-Heng Guo,Fei Zhang,Yue-Peng Yue,Mei-Qiang Feng,Jiang-Bo Zhao 한국정밀공학회 2020 International Journal of Precision Engineering and Vol.21 No.8

Infilling strategies play an important role in kriging based optimization, especially when computationally expensive simulations are involved. In order to improve the efficiency of constructing a high-precision kriging model, an improved expected improvement criterion (IEI) and a parallel infilling strategy are proposed based on the maximum expected improvement (EI) criterion. In the proposed parallel infilling strategy, new sample points are generated by employing IEI criterion coupled with EI criterion. During the improved sampling process, redundant and pseudo sample are deleted in order to avoid failure of constructing a kriging model. An improved weighted particle swarm optimization (WPSO) algorithm is proposed to improve optimization efficiency. The proposed parallel infilling strategy is applied to nonlinear function optimization and variable blank holder force (VBHF) optimization in a double-c stamped part. Based on the LHD and software DYNAFORM, kriging models between the VBHF and forming quality are constructed. Compared with the initial kriging models, the meat relative error of kriging models with the proposed parallel infilling strategy for the wrinkling and average thinning rate are reduced by 95% and 55%, respectively. The optimal VBHF is obtained by the WPSO. The results show that, cracking has been completely eliminated and wrinkling has been decreased, greatly improving the forming quality of the double-c stamped part.

Fishbone Oscillations in the Experimental Advanced Superconductivity Tokamak

Liqing Xu,Liqun Hu,Yi Yuan,Yingying Li,Guo-Qiang Zhong,Hai-Qing Liu,Kaiyun Chen,Tong-Hui Shi,Yan-Min Duan 한국물리학회 2018 THE JOURNAL OF THE KOREAN PHYSICAL SOCIETY Vol.72 No.6

A fishbone oscillation was observed in the neutral beam injection plasma at Experimental Ad- vanced Superconductivity Tokamak (EAST). This m = 1/n = 1 (m, n: poloidal, toroidal mode numbers, respectively) typical internal kink mode travels in the ion-diamagnetism direction in the poloidal section with a rotation speed close to the ion diamagnetic drift frequency. A high thermal plasma beta and high amounts of energetic ions are necessary for the mode to develop. Fishbone oscillations can expel heavy impurities in the core, which favors sustaining a high-performance plasma. The born frequency of the fishbone oscillation is the ion diamagnetic drift frequency and the chirping down of the frequency during the initial growth phase is the result of a drop in ion- diamagnetic drift frequency. The excitation energy is thought to be due to the thermal plasma pressure gradient; however, the development of a fishbone oscillation is related to energetic ions. A fishbone oscillation was observed in the neutral beam injection plasma at Experimental Advanced Superconductivity Tokamak (EAST). This m = 1/n = 1 (m, n: poloidal, toroidal mode numbers, respectively) typical internal kink mode travels in the ion-diamagnetism direction in the poloidal section with a rotation speed close to the ion diamagnetic drift frequency. A high thermal plasma beta and high amounts of energetic ions are necessary for the mode to develop. Fishbone oscillations can expel heavy impurities in the core, which favors sustaining a high-performance plasma. The born frequency of the fishbone oscillation is the ion diamagnetic drift frequency and the chirping down of the frequency during the initial growth phase is the result of a drop in ion- diamagnetic drift frequency. The excitation energy is thought to be due to the thermal plasma pressure gradient; however, the development of a fishbone oscillation is related to energetic ions.