http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
Yinghui Bao,Chunqi Gao,Wenbo Hao,Cheng Ji,Lihong Zhao,Jianyun Zhang,Tao Liu,Qiugang Ma 아세아·태평양축산학회 2015 Animal Bioscience Vol.28 No.10
The present study was conducted to determine the effects of L-carnosine (LC) and/or alpha-lipoic acid (ALA) supplementation on growth performance, blood thyroid hormones and lipid profiles in finishing pigs. A total of 40 (Landrace×Yorkshire) pigs with an initial body weight of 57.93±3.14 kg were randomly allocated to 4 experimental diets using a 2×2 factorial arrangement with 2 LC supplemental levels (0 or 0.1%) and 2 ALA supplemental levels (0 or 0.03%) in basal diets. The results showed that pigs fed LC-supplemented diets increased final live weight, average daily gain, and average daily feed intake compared to those of pigs fed without LC-supplemented diets (p<0.05). Dietary supplementation with ALA did not affect the growth performance and carcass traits of pigs (p>0.05). Additionally, LC supplementation increased serum triiodothyronine, thyroxine levels, and ALA supplementation increased serum triiodothyronine levels (p<0.05). Serum total cholesterol and triglycerides levels were significantly decreased in LC and ALA supplemented groups, respectively (p<0.05). Moreover, serum low density lipoprotein cholesterol levels were lower in the ALAsupplemented groups than those of pigs fed without ALA-supplemented diets (p<0.05). However, no significant LC×ALA interaction effect on growth performance, blood thyroid hormones and lipid profiles was found. This study suggested that dietary supplementation of LC resulted in better growth performance compared to that of ALA supplementation. L-carnosine and/or ALA supplementation positively modified blood lipid profiles, which may have the potential to prevent cardiovascular diseases.
Yinghui Ren,Dan Li,Jianhua Yi,Fengqi Zhao,Haixia Ma,Kangzhen Xu,Jirong Song 대한화학회 2010 Bulletin of the Korean Chemical Society Vol.31 No.7
4-Amino-1,2,4-triazole copper complex (4-ATzCu) was synthesized, and its thermal behaviors, nonisothermal decomposition reaction kinetics were studied by DSC and TG-DTG techniques. The thermal decomposition reaction kinetic equation was obtained as: dα / dt =1022.01 (1−α )[−ln(1−α )]1/3 exp(−2.75×104 /T) . The standard mole specific heat capacity of the complex was determined and the standard molar heat capacity is 305.66 J·mol‒1·K‒1 at 298.15 K. The entropy of activation ( ΔS ≠ ), enthalpy of activation (ΔH ≠), and Gibbs free energy of activation ( ΔG≠) are calculated as 171.88 J·mol‒1·K‒1, 225.81 kJ·mol‒1 and 141.18 kJ·mol‒1, and the adiabatic time-to-explosion of the complex was obtained as 389.20 s.
Ren, Yinghui,Li, Dan,Yi, Jianhua,Zhao, Fengqi,Ma, Haixia,Xu, Kangzhen,Song, Jirong Korean Chemical Society 2010 Bulletin of the Korean Chemical Society Vol.31 No.7
4-Amino-1,2,4-triazole copper complex (4-ATzCu) was synthesized, and its thermal behaviors, nonisothermal decomposition reaction kinetics were studied by DSC and TG-DTG techniques. The thermal decomposition reaction kinetic equation was obtained as: $d\alpha$ / dt =$10^{22.01}$ (1-$\alpha$)[-ln(1-$\alpha$)]$^{1/3}$ exp($-2.75\times10^4$ /T). The standard mole specific heat capacity of the complex was determined and the standard molar heat capacity is 305.66 $J{\cdot}mol^{-1}{\cdot}K^{-1}$ at 298.15 K. The entropy of activation $({\Delta}S^{\neq})$, enthalpy of activation $({\Delta}H^{\neq})$, and Gibbs free energy of activation $({\Delta}G^{\neq})$ are calculated as 171.88 $J{\cdot}mol^{-1}{\cdot}K^{-1}$ 225.81 $kJ{\cdot}mol^{-1}$ and 141.18 $kJ{\cdot}mol^{-1}$, and the adiabatic time-to-explosion of the complex was obtained as 389.20 s.
Bao, Yinghui,Gao, Chunqi,Hao, Wenbo,Ji, Cheng,Zhao, Lihong,Zhang, Jianyun,Liu, Tao,Ma, Qiugang Asian Australasian Association of Animal Productio 2015 Animal Bioscience Vol.28 No.10
The present study was conducted to determine the effects of L-carnosine (LC) and/or alpha-lipoic acid (ALA) supplementation on growth performance, blood thyroid hormones and lipid profiles in finishing pigs. A total of 40 ($Landrace{\times}Yorkshire$) pigs with an initial body weight of $57.93{\pm}3.14kg$ were randomly allocated to 4 experimental diets using a $2{\times}2$ factorial arrangement with 2 LC supplemental levels (0 or 0.1%) and 2 ALA supplemental levels (0 or 0.03%) in basal diets. The results showed that pigs fed LC-supplemented diets increased final live weight, average daily gain, and average daily feed intake compared to those of pigs fed without LC-supplemented diets (p<0.05). Dietary supplementation with ALA did not affect the growth performance and carcass traits of pigs (p>0.05). Additionally, LC supplementation increased serum triiodothyronine, thyroxine levels, and ALA supplementation increased serum triiodothyronine levels (p<0.05). Serum total cholesterol and triglycerides levels were significantly decreased in LC and ALA supplemented groups, respectively (p<0.05). Moreover, serum low density lipoprotein cholesterol levels were lower in the ALA-supplemented groups than those of pigs fed without ALA-supplemented diets (p<0.05). However, no significant $LC{\times}ALA$ interaction effect on growth performance, blood thyroid hormones and lipid profiles was found. This study suggested that dietary supplementation of LC resulted in better growth performance compared to that of ALA supplementation. L-carnosine and/or ALA supplementation positively modified blood lipid profiles, which may have the potential to prevent cardiovascular diseases.
Xue Bai,Yinghui Zhao,Zhenhu Song,Hui Chen,Sihang Zhang,Yonghui Luo,YingChun Gu,Shijian Tu,Guo Yao,Sheng Chen 한국섬유공학회 2022 Fibers and polymers Vol.23 No.3
The preparation of polymer nanocomposites combined with high strength, toughness, and high transparencyremains a challenge. Aramid fibers are often used as fiber-reinforced materials for their superior mechanical and thermalproperties, but the weak interfacial force between aramid fibers and matrix polymer limits the application in compositematerials. In this work, aramid nanofibers were prepared by a two-step process, which included deprotonation and acidhydrothermal treatment to obtain better dispersions in general solvents. The hydrothermal aramid nanofibers (HANFs) wereused as reinforcing materials and blended with polyacrylonitrile (PAN) to prepare polyacrylonitrile/aramid nanofibers (PAN/HANFs) composite films with different mass fractions of HANFs. The morphologies of HANFs and the thermal, optical, andmechanical properties of composite films were investigated. Interestingly, when the mass fraction of aramid nanofibers wasless than 1.0 %, the composite films were synchronously strengthened and toughened. When the mass fraction of HANFswas 0.5 %, the tensile strength and toughness of the PAN/HANFs composite film reached 62.04 MPa and 22.56 MJ/m3,which were 74.23 % and 162.31 % higher than the pure PAN film, respectively. Besides, its average transmittance in thevisible light region remained 76.34 %. This work may offer a novel and facile strategy for high transparent reinforcedpolymer composites, which have potential applications in high strength fiber or optical film.
Xiaolei Ren,Xiangang Zuo,Kangzhen Xu,Yinghui Ren,Jie Huang,Jirong Song,Bozhou Wang,Fengqi Zhao 대한화학회 2011 Bulletin of the Korean Chemical Society Vol.32 No.7
A novel energetic material, 1-amino-1-(2,4-dinitrophenylhydrazinyl)-2,2-dinitroethylene (APHDNE), was synthesized by the reaction of 1,1-diamino-2,2-dinitroethylene (FOX-7) and 2,4-dinitrophenylhydrazine in Nmethyl pyrrolidone (NMP) at 110 ^oC. The theoretical investigation on APHDNE was curried out by B3LYP/6-311+G^* method. The IR frequencies analysis and NMR chemical shifts were performed and compared with the experimental results. The thermal behavior of APHDNE was studied by DSC and TG/DTG methods, and can be divided into two crystal phase transition processes and three exothermic decomposition processes. The enthalpy, apparent activation energy and pre-exponential factor of the first exothermic decomposition reaction were obtained as −525.3 kJ mol^−1, 276.85 kJ mol^−1 and 10^(26.22) s^−1, respectively. The critical temperature of thermal explosion of APHDNE is 237.7 ^oC. The specific heat capacity of APHDNE was determined with micro-DSC method and theoretical calculation method, and the molar heat capacity is 363.67 J mol^−1 K^−1 at 298.15 K. The adiabatic time-to-explosion of APHDNE was also calculated to be a certain value between 253.2-309.4 s. APHDNE has higher thermal stability than FOX-7.
Ren, Xiaolei,Zuo, Xiangang,Xu, Kangzhen,Ren, Yinghui,Huang, Jie,Song, Jirong,Wang, Bozhou,Zhao, Fengqi Korean Chemical Society 2011 Bulletin of the Korean Chemical Society Vol.32 No.7
A novel energetic material, 1-amino-1-(2,4-dinitrophenylhydrazinyl)-2,2-dinitroethylene (APHDNE), was synthesized by the reaction of 1,1-diamino-2,2-dinitroethylene (FOX-7) and 2,4-dinitrophenylhydrazine in N-methyl pyrrolidone (NMP) at 110 $^{\circ}C$. The theoretical investigation on APHDNE was curried out by B3LYP/6-311+$G^*$ method. The IR frequencies analysis and NMR chemical shifts were performed and compared with the experimental results. The thermal behavior of APHDNE was studied by DSC and TG/DTG methods, and can be divided into two crystal phase transition processes and three exothermic decomposition processes. The enthalpy, apparent activation energy and pre-exponential factor of the first exothermic decomposition reaction were obtained as -525.3 kJ $mol^{-1}$, 276.85 kJ $mol^{-1}$ and $10^{26.22}s^{-1}$, respectively. The critical temperature of thermal explosion of APHDNE is 237.7 $^{\circ}C$. The specific heat capacity of APHDNE was determined with micro-DSC method and theoretical calculation method, and the molar heat capacity is 363.67 J $mol^{-1}K^{-1}$ at 298.15 K. The adiabatic time-to-explosion of APHDNE was also calculated to be a certain value between 253.2-309.4 s. APHDNE has higher thermal stability than FOX-7.
Jianhui Zhang,Jun Ge,Juyin Li,Jianqiang Li,Yong Zhang,Yinghui Shi,Jiaojiao Sun,Qiongjin Wang,Xiaobo Zhang,Xing-xu Zhao 대한수의학회 2023 Journal of Veterinary Science Vol.24 No.1
Background: Inactivated vaccines are limited in preventing foot-and-mouth disease (FMD) due to safety problems. Recombinant virus-like particles (VLPs) are an excellent candidate for a novel vaccine for preventing FMD, given that VLPs have similar immunogenicity as natural viruses and are replication- and infection-incompetent. Objectives: The 3C protease and P1 polyprotein of type O FMD virus (FDMV) was expressed in yeast Hansenula polymorpha to generate self-resembling VLPs, and the potential of recombinant VLPs as an FMD vaccine was evaluated. Methods: BALB/c mice were immunized with recombinant purified VLPs using CpG oligodeoxynucleotide and aluminum hydroxide gel as an adjuvant. Cytokines and lymphocytes from serum and spleen were analyzed by enzyme-linked immunosorbent assay, enzyme-linked immunospot assay, and flow cytometry. Results: The VLPs of FMD were purified successfully from yeast protein with a diameter of approximately 25 nm. The immunization of mice showed that animals produced high levels of FMDV antibodies and a higher level of antibodies for a longer time. In addition, higher levels of interferon-γ and CD4+ T cells were observed in mice immunized with VLPs. Conclusions: The expression of VLPs of FMD in H. polymorpha provides a novel strategy for the generation of the FMDV vaccine.