On the die face design for stamping an automotive engine hood

Ming-Zhi Chen,Fuh-Kuo Chen,Shi-Wei Wang,Ching-I Lin 한국소성가공학회 2010 기타자료 Vol.2010 No.6

The die face design for stamping an engine hood was examined in the present study using both the finite element analysis and the experimental approach. Since the engine hood is mainly manufactured in the drawing operation, the die addendum design is the key to the success of manufacturing a defect free product. In order to analyze the addendum design, the existing die addendum designs corresponding to those engine hoods were reviewed first and the design parameters were established. The preliminary study was then performed to determine favorable operation conditions including the suitable stamping die angle, blank-holder surface shape, and die open line. The optimum design for the die addendum face was then investigated with the use of finite element simulations. The effects of the design parameters constructed in the present study on the occurrence of the defects were examined and a systematic design guideline was proposed. In order to validate the proposed die design, the actual stamping tooling was manufactured according to the finite element analysis and the engine hoods were produced. The part shape, thickness distribution, and the stretch at the central region of the production part were compared with those obtained from the finite element simulations. The consistent agreement between the product parts and the simulation results confirms the validity of the design guide proposed in the present study for stamping an engine hood.

RON and MET Co-overexpression Are Significant Pathological Characteristics of Poor Survival and Therapeutic Targets of Tyrosine Kinase Inhibitors in Triple-Negative Breast Cancer

Tian-Hao Weng,Min-Ya Yao,Xiang-Ming Xu,Chen-Yu Hu,Shu-Hao Yao,Yi-Zhi Liu,Zhi-Gang Wu,Tao-Ming Tang,Pei-Fen Fu,Ming-Hai Wang,Hang-Ping Yao 대한암학회 2020 Cancer Research and Treatment Vol.52 No.3

Purpose Triple-negative breast cancer (TNBC) is highly malignant and has poor prognosis and a high mortality rate. The lack of effective therapy has spurred our investigation of new targets for treating this malignant cancer. Here, we identified RON (macrophage-stimulating 1 receptor) and MET (MET proto-oncogene, receptor tyrosine kinase) as a prognostic biomarker and therapeutic targets for potential TNBC treatment. Materials and Methods We analyzed RON and MET expression in 187 primary TNBC clinical samples with immunohistochemistry. We validated the targeted therapeutic effects of RON and MET in TNBC using three tyrosine kinase inhibitors (TKIs): BMS-777607, INCB28060, and tivantinib. The preclinical therapeutic efficacy of the TKIs was mainly estimated using a TNBC xenograft model. Results Patients with TNBC had widespread, abnormal expression of RON and MET. There was RON overexpression, MET overexpression, and RON and MET co-overexpression in 63 (33.7%), 63 (33.7%), and 43 cases (23.0%), respectively, which had poor prognosis and short survival. In vivo, the TKI targeting RON ant MET inhibited the activation of the downstream signaling molecules, inhibited TNBC cell migration and proliferation, and increased TNBC cell apoptosis; in the xenograft model, they significantly inhibited tumor growth and shrank tumor volumes. The TKI targeting RON and Met, such as BMS-777607 and tivantinib, yielded stronger anti-tumor effects than INCB28060. Conclusion RON and MET co-overexpression can be significant pathological characteristics in TNBC for poor prognosis. TKIs targeting RON and MET have stronger drug development potential for treating TNBC.

Genetic variations in the bitter taste receptor gene TAS2R38 are related to cigarette smoking behavior in Han Chinese smokers

Qi Fei-Yan,Zhu Zhou-Hai,Li Meng,Guan Ying,Peng Qi-Yuan,Lu She-Ming,Liu Zhi-Hua,Wang Ming-Feng,Miao Ming-Ming,Chen Zhang-Yu,Li Xue-Mei,Bai Jie,Yao Jian-Hua 한국유전학회 2022 Genes & Genomics Vol.44 No.11

Background: Smoking behavior is influenced by multiple genes, including the bitter taste gene TAS2R38. It has been reported that the correlation between TAS2R38 and smoking behavior has ethnicity-based differences. However, the TAS2R38 status in Chinese smokers is still unclear. Objective: This study aims to investigate the possible relationship between genetic variations in TAS2R38 (A49P, V262A and I296V) and smoking behaviors in the Han Chinese population. Methods: The haplotype analyses were performed and smoking behavior questionnaire was completed by 1271 individuals. Genetic association analyses for smoking behavior were analyzed using chi-square test. Further, for investigating the molecular mechanism of TAS2R38 variants effect on smoking behavior, we conducted TAS2R38-PAV and TAS2R38-AVI expression plasmids and tested the cellular calcium assay by cigarette smoke compounds stimulus in HEK293. Results: Significant associations of genetic variants within TAS2R38 were identified with smoking behavior. We found a higher PAV/PAV frequency than AVI/AVI in moderate and high nicotine dependence (FTND ≥ 4; X2 = 4.611, 1 df, p = 0.032) and strong cigarette smoke flavor intensity preference (X2 = 4.5383, 1 df, p = 0.033) in participants. Furthermore, in the in vitro cellular calcium assay, total particle matter (TPM), N-formylnornicotine and cotinine, existing in cigarette smoke, activated TAS2R38-PAV but not TAS2R38-AVI-transfected cells. Conclusion: Our data highlights that genetic variations in TAS2R38 are related to smoking behavior, especially nicotine dependence and cigarette smoke flavor intensity preference. Our findings may encourage further consideration of the taste process to identify individuals susceptible to nicotine dependence, particularly Han Chinese smokers.

N-Heterocyclic Carbene-Tricyclohexylphosphine Palladium(II) Complex: Synthesis, Crystal Structure and Application in Suzuki Reaction of Aryl Chlorides

Chen Xu,Xin-Qi Hao,Zhen Li,Lu-Meng Duan,Zhi-Qiang Wang,Bao-Ming Ji,Mao-Ping Song 대한화학회 2012 Bulletin of the Korean Chemical Society Vol.33 No.10

Characterization of two novel γ-gliadin genes encoded by K genome of Crithopsis delileana and evolution analysis with those from Triticeae

Zhi-Fu Guo,Li-Jun Zhang,Ming Zhong,Yu-Ming Wei,Li Zhang,Hui Ma,Hao-Ge Li,Li-Jing Chen,Jing-Wei Lin,You-Liang Zheng 한국유전학회 2010 Genes & Genomics Vol.32 No.3

By acid polyacrylamide gel electrophoresis (A-PAGE) analysis,it was indicated that the electrophoresis mobility of gliadins from Crithopsis delileana (Schult) Roshev (2n=2x=14,KK) had obvious difference with those from common wheat in α, γ and ω region. Using homologous primers, two γ-gliadin genes (gli-Kr1 and gli-Kr2) were isolated from C. delileana,which had been deposited in the GenBank under accession numbers EU283818 and EU283821, respectively. Two γ-gliadin genes of C. delileana had the similar primary structures to the corresponding gene sequences from other wheat related species. The differences were mainly resulted from substitutions,insertions and deletions involving single amino acid residues or motifs of γ-gliadins. The repetitive domains of gli-Kr1 and gli-Kr2 from C. delileana are shorter than most of other sequences. By the alignment of γ-gliadin genes from A, B, D, Am, Au, S, Sl, Ssh, Ss and Sb genomes of Triticum and Aegilops, R genome of Secale (γ-secalin), Ee genome of Lophopyrum and K genome of Crithopsis in Triticeae, phylogenetic analysis indicated that two γ-gliadin genes of C. delileana could be clustered together with a γ-gliadin genefrom Ssh genome of Aegilops by an interior paralleled branch. It was the first time that the γ-gliadin genes encoded by K genome of C. delileana were characterized. These could offer precious information for better understanding the qualities associated with gliadins, the response in coeliac disease and studying the evolutionary relationship of gliadins in Triticeae.

CFD based simulations of flutter characteristics of ideal thin plates with and without central slot

Zhi-wen Zhu,Zheng-qing Chen,Ming Gu 한국풍공학회 2009 Wind and Structures, An International Journal (WAS Vol.12 No.1

In this paper, the airflow around an ideal thin plate (hereafter referred to as ITP) with various ratios of central slot is simulated by using the finite-difference-method (FDM)-based Arbitrary-Lagrangian-Eulerian descriptions for the rigid oscillating body. The numerical procedure employs the second-order projection scheme to decouple the governing equations, and the multigrid algorithm with three levels to improve the computational efficiency in evaluating of the pressure equation. The present CFD method is validated through comparing the computed flutter derivatives of the ITP without slot to Theodorsen analytical solutions. Then, the unsteady aerodynamics of the ITP with and without central slot is investigated. It is found that even a smaller ratio of central slot of the ITP has notable effects on pressure distributions of the downstream section, and the pressure distributions on the downstream section will further be significantly affected by the slot ratio and the reduced wind speeds. Continuous increase of with the increase of central slot may be the key feature of the slotted ITP. Finally, flutter analyses based on the flutter derivatives of the slotted ITP are performed, and moreover, flutter instabilities of a scaled sectional model of a twin-deck bridge with various ratios of deck slot are investigated. The results confirm that the central slot is effective to improve bridge flutter stabilities, and that the flutter critical wind speeds increase with the increase of slot ratio.

Rapid and Sensitive Detection of Salmonella in Chickens Using Loop-Mediated Isothermal Amplification Combined with a Lateral Flow Dipstick

( Zhi-ke Liu ),( Qiu-yu Zhang ),( Ning-ning Yang ),( Ming-guo Xu ),( Jin-feng Xu ),( Ming-long Jing ),( Wen-xing Wu ),( Ya-dong Lu ),( Feng Shi ),( Chuang-fu Chen ) 한국미생물생명공학회(구 한국산업미생물학회) 2019 Journal of microbiology and biotechnology Vol.29 No.3

Salmonellosis is a highly contagious bacterial disease that threatens both human and poultry health. Tests that can detect Salmonella in the field are urgently required to facilitate disease control and for epidemiological investigations. Here, we combined loop-mediated isothermal amplification (LAMP) with a chromatographic lateral flow dipstick (LFD) to rapidly and accurately detect Salmonella. LAMP primers were designed to target the Salmonella invA gene. LAMP conditions were optimized by adjusting the ratio of inner to outer primers, MgSO₄ concentration, dNTP mix concentration, amplification temperature, and amplification time. We evaluated the specificity of our novel LAMP-LFD method using six Salmonella species and six related non-Salmonella strains. All six of the Salmonella strains, but none of the non-Salmonella strains, were amplified. LAMP-LFD was sensitive enough to detect concentrations of Salmonella enterica subsp. enterica serovar Pullorum genomic DNA as low as 89 fg/μl, which is 1,000 times more sensitive than conventional PCR. When artificially contaminated feed samples were analyzed, LAMP-LFD was also more sensitive than PCR. Finally, LAMP-LFD gave no false positives across 350 chicken anal swabs. Therefore, our novel LAMP-LFD assay was highly sensitive, specific, convenient, and fast, making it a valuable tool for the early diagnosis and monitoring of Salmonella infection in chickens.

Optimal Factors of Diffusion Tensor Imaging Predicting Corticospinal Tract Injury in Patients with Brain Tumors

Zhi-gang Min,Chen Niu,Qiu-li Zhang,Ming Zhang,Yu-cheng Qian 대한영상의학회 2017 Korean Journal of Radiology Vol.18 No.5

Objective: To identify the optimal factors in diffusion tensor imaging for predicting corticospinal tract (CST) injury caused by brain tumors. Materials and Methods: This prospective study included 33 patients with motor weakness and 64 patients with normal motor function. The movement of the CST, minimum distance between the CST and the tumor, and relative fractional anisotropy (rFA) of the CST on diffusion tensor imaging, were compared between patients with motor weakness and normal function. Logistic regression analysis was used to obtain the optimal factor predicting motor weakness. Results: In patients with motor weakness, the displacement (8.44 ± 6.64 mm) of the CST (p = 0.009), minimum distance (3.98 ± 7.49 mm) between the CST and tumor (p < 0.001), and rFA (0.83 ± 0.11) of the CST (p < 0.001) were significantly different from those of the normal group (4.64 ± 6.65 mm, 14.87 ± 12.04 mm, and 0.98 ± 0.05, respectively) (p = 0.009, p < 0.001, and p < 0.001). The frequencies of patients with the CST passing through the tumor (6%, p = 0.002), CST close to the tumor (23%, p < 0.001), CST close to a malignant tumor (high grade glioma, metastasis, or lymphoma) (19%, p < 0.001), and CST passing through infiltrating edema (19%, p < 0.001) in the motor weakness group, were significantly different from those of the patients with normal motor function (0, 8, 1, and 10%, respectively). Logistic regression analysis showed that decreased rFA and CST close to a malignant tumor were effective variables related to motor weakness. Conclusion: Decreased fractional anisotropy, combined with closeness of a malignant tumor to the CST, is the optimal factor in predicting CST injury caused by a brain tumor.

Experimental and Numerical Investigation on the Dynamic Responses of the Remaining Structure under Impact Loading with Column Being Removed

Chen Ou,Jun Liu,Lei Sun,Zhi-min Xiao,Yi Cheng,Ming-qing Liu,Fu-tian Zhao,Meng-yang Zhen,Yue Wang 대한토목학회 2021 KSCE JOURNAL OF CIVIL ENGINEERING Vol.25 No.6

The dynamic response and stability of building structures under accidental loads such as earthquake, explosion, and impact have been focused by experts. The significant influence will be induced once the damaged structure begins to collapse. In this study, a reinforced concrete frame structure model was designed and tested to study the dynamic response law of the structure under the condition of the failure of the middle column of the model structure, the remaining structure successively failed the load-bearing column and continued to be subjected to impact load and uniform load. The analytical method was used to calculate the ultimate uniform load subjecting to the structure under the failure of four load-bearing columns, because its value was less than the load in this test, the structure collapsed. The finite element calculation model was established, and compared the simulation results to the test results to verify its rationality. Then, the influence of the impact energy and the structural stores on the dynamic response of the structure were analyzed. The results showed that the peak value of the dynamic response of the damaged structure did not increase strictly with the increase of the number of failure columns, which may be related to the sequence of failure columns.

Molecular cloning of two novel stearoyl-acyl desaturase genes from winterness wheat

Zhi-Fu Guo,Feng-Zhen Li,Xiao-Gang Ma,Feng Lin,Hui Ma,Li-Jing Chen,Ming Zhong,Li-Ping Bai,Ying Yi 한국유전학회 2011 Genes & Genomics Vol.33 No.5

Using RT-PCR and rapid amplification of cDNA ends, two new full-length cDNAs of SAD (TaSAD1 and TaSAD2) were obtained from a hardiest winter wheat cultivar (Mironovskaya808). Sequence comparison analysis showed that the deduced amino acid sequences of TaSAD1 and TaSAD2 had high similarity to those of other reported SAD proteins. They were also different each other by some substitutions, insertions and/or deletions involving single amino acid residues or motifs. Based on evolution analysis, it was clear that all SAD genes from Poaceae were closer than those from other genus such as Arabidopsis,Glycine, Triadica, Brassica, Sesamum and Bassia. All SAD genes clustered into two major groups in Poaceae. Meanwhile,TaSAD1 and TaSAD2 were clustered into different groups. The tertiary structure prediction indicated that both TaSAD1 and TaSAD2 proteins were a compact globular protein and their model structures almost were the same.