A Study on the Miniaturization of a Protective Device for the Micro Smart Grid Simulator

Yun‑Seok Ko,Kyung Ryu,Min‑Soo Oh,Hyuk‑Sik Yoon 대한전기학회 2020 Journal of Electrical Engineering & Technology Vol.15 No.1

In this paper, a miniaturization methodology of protective devices (PDs) was proposed which plays a key role in evaluating the efectiveness of the developed protection and control algorithms in the micro smart grid simulator. The micro PD was designed to have the rated voltage of 19 V and the breaking current of 20 A, and was designed in a multi-layered hardware structure to satisfy the size of 13×13 cm2 . Also, the micro PD was designed in a multifunctional structure to allow one micro PD to perform all the functions of the circuit breaker, recloser and switches on the micro smart grid simulator to enhance the efciency of development. Finally, it was verifed that the developed micro PD can be applied as protective devices of the micro smart grid simulator by showing that it operates correctly according to the predetermined operation sequence for the test scenarios on the built test system.

국내외 수용가 맞춤형 수력발전시스템 현대화개발 및 실증

오민환(Min-Hwan Oh),신기석(Ki-Seok Shin),임재황(Jae-Hwang Lim),윤여창(Yeo-Chang Yun),김현아(Hyun-Ah Kim),강석원(Seok-Won Kang),백종명(Jong-Myung Paik),이준용(Jun-Yong Lee) 대한전기학회 2017 대한전기학회 학술대회 논문집 Vol.2017 No.10

Loop와 HPLC Purification 방법보다 더 높은 비방사능을 보여주는 카트리지 Methylation과 Purification을 이용한 손쉬운 [ ¹¹C]PIB 합성

이용석,조용현,이홍재,이윤상,정재민,Lee, Yong-Seok,Cho, Yong-Hyun,Lee, Hong-Jae,Lee, Yun-Sang,Jeong, Jae Min 대한핵의학기술학회 2018 핵의학 기술 Vol.22 No.2

$[^{11}C]PIB$는 베타아밀로이드($A{\beta}\;plague$)라는 변성 단백질에 결합하여 뇌의 기능과 기억력을 서서히 감퇴시키는 비가역적인 질환인 치매를 조기에 감별할 수 있는 대표적인 방사성의약품이다. 지금까지 많은 실험실에서 $[^{11}C]PIB$는 자동화합성장치에서 $[^{11}C]methyl\;iodide$나 $[^{11}C]methyl\;triflate$를 만든 다음 loop나 vial 방법을 사용하여 methylation을 한 다음 HPLC로 정제를 하는 것이다. 하지만 기존의 보고된 방법은 시간이 오래 걸리며, HPLC와 같은 복잡한 시스템을 필요로 하여 소규모 실험실에서 합성하기에 적합하지 않으며, 최종 product에서 에탄올 함량이 높다는 단점이 있었다. 이러한 단점을 보완하기 위하여 카트리지만을 사용하여 카트리지에서 methylation과 purification을 동시에 실시함으로써 합성 시간을 단축하고, 비방사능이 높고, 낮은 에탄올 함량을 가진 $[^{11}C]PIB$를 합성 가능한지 확인하고자 하였다. 가장 널리 사용하는 카트리지 6종(CM, HLB, Alumina, C18, tC18, tC18 environmental을 선택하여 screening test를 실시하였다. 6-OH-BTA-0 1 mg을 c-HXO에 녹인 다음 6개의 카트리지에 loading를 한 다음 0.5 M MSP(pH 5.1) 20 mL로 정제를 한 다음 최종 fraction을 받아서 analytical HPLC로 전구체 잔류량을 측정한 결과 hydrophobicity가 낮은 계열(CM, HLB, Alumina)의 카트리지에서는 완충액으로 정제를 하였을 때 잔류전구체의 양이 많았으나, 탄소함량이 많은 계열의 카트리지(C18, tC18, tC18 environmental)에서는 잔류전구체의 양이 CM, HLB, Alumina 카트리지에 비하여 상대적으로 적었다. 완충액의 정제 농도와 부피를 최적화 하기 위하여 screening test에서 가장 좋은 결과를 나타낸 C18 series cartridge를 가지고 추가 실험을 진행하였다. 인산완충액 농도를 10 mM, 20 mM, 30 mM, 40 mM, 50 mM, 250 mM, 500 mM로 변화시켰으며, 에탄올 함량은 20%와 30%로 하여 용출액을 분석하여서, $[^{11}C]PIB$를 카트리지로 합성하기 위한 최적의 조합은 tC18 environmental cartridge와 0.5 M MSP 20 mL인 것을 알 수 있었다. 기존에 보고된 방법과 cartridge를 비교한 결과, 합성시간에서는 각각 15 ~ 18min, 8 ~ 9 min이 소요되었으며, product activity는 각각 $4.1{\pm}1.4\;GBq$ (n=41), $3.8{\pm}0.9\;GBq$ (n=3), 방사화학적 수율(based on HPLC analysis of the crude product)에서는 $13.9{\pm}4.4%$ (n=41), $12.3{\pm}2.2%$ (n=3)로 별다른 차이가 없었으며, 비방사능에 있어서는 HPLC purification method가 $78.7{\pm}39.7\;GBq/{\mu}mol$ (n=41), cartridge method가 $420.6{\pm}20.4\;GBq/{\mu}mol$ (n=3)로 카트리지 방법이 기존 방법보다 더 좋은 결과를 나타내었다. 또한, 잔류 용매(c-HXO)도 vial or loop method와 별다른 차이가 없었으며, 에탄올 함량에 있어서는 70%(기존 방법)에서 30%(카트리지 방법)로 두 배 이상 함량이 적다는 사실을 알 수 있었다. 지금까지 알아본바와 같이 cartridge method는 reported method(HPLC purification)에 비하여 더 향상된 결과를 보여준다는 사실을 확인하였다. $[^{11}C]PIB$ synthesis has been performed by a loop-methylation and HPLC purification in our lab. However, this method is time-consuming and requires complicated systems. Thus, we developed an on-cartridge method which simplified the synthetic procedure and reduced time greatly by removing HPLC purification step. We compared 6 different cartridges and evaluated the $[^{11}C]PIB$ production yields and specific activities. $[^{11}C]MeOTf$ was synthesized by using TRACERlab FXC Pro and was transferred into the cartridge by blowing with helium gas for 3 min. To remove byproducts and impurities, cartridges were washed out by 20 mL of 30% EtOH in 0.5 M $NaH_2PO_4$ solution (pH 5.1) and 10 mL of distilled water. And then, $[^{11}C]PIB$ was eluted by 5 mL of 30% EtOH in 0.5 M $NaH_2PO_4$ into the collecting vial containing 10 mL saline. Among the 6 cartridges, only tC18 environmental cartridge could remove impurities and byproducts from $[^{11}C]PIB$ completely and showed higher specific activity than traditional HPLC purification method. This method took only 8 ~ 9 min from methylation to formulation. For the tC18 environmental cartridge and conventional HPLC loop methods, the radiochemical yields were $12.3{\pm}2.2%$ and $13.9{\pm}4.4%$, respectively, and the molar activities were $420.6{\pm}20.4GBq/{\mu}mol$ (n=3) and $78.7{\pm}39.7GBq/{\mu}mol$ (n=41), respectively. We successfully developed a facile on-cartridge methylation method for $[^{11}C]PIB$ synthesis which enabled the procedure more simple and rapid, and showed higher molar radio-activity than HPLC purification method.

수냉쿨러의 냉각 효율 향상을 위한 플레이트 부품의 형상에 관한 연구

성윤호,김형찬,김선민,윤석영,이영웅,이상욱 순천향대학교 부설 산업기술연구소 2021 순천향 산업기술연구소논문집 Vol.27 No.2

This study investigates changes in cooling efficiency for heat sink plate width, perforated width, and chamfer angle as part of a parameter study to maximize cooling efficiency of heat sink by setting various variables on plates. The width of the plate is set to 16, 20, 24, 28 mm, perforated width 1.5, 2.0, 2.5 mm, chamfer angles 5, 10, 15 and 20°. By conducting a computational study with Ansys Fluent, the sink plate with plate width of 16mm, perforated width of 3mm and chamfer angle of 10° is shown to be the best cooling efficiency.

자연임신에서 분만 및 주산기 예후에 대한 임상적 고찰

이윤희,안준모,김태성,박은희,정집광,이석민,이해혁 순천향의학연구소 2002 Journal of Soonchunhyang Medical Science Vol.8 No.1

Object: To compare pregnancy outcome between term pregnancy and postterm pregnancy. Method: A clinical observation has been made on 60 cases of postterm pregnancies out of 64 cases delivered at the Dept. of Obstetrics & Gynecology, Soonchunhyang University from January 1, 1997 to May 31, 2002. 100 cases of full term deliveries of 37 to 42 gestational weeks conducted in same period were used as the control group for this study. We analyzed their cesarean section rate, fetal weight, placental weight, meconium stain, perinatal morbidity. The statistical significance was defined as P<0.05. Result: The following results were obtained 1. The incidence of postterm pregnancy was 1.34%. 2. The cesarean delivery rate in postterm group(51.7%) was significantly higher than control group(26%). 3. The incidence of large fetus (weight over 4,000gm) in the postterm group(21.7%) was higher than control group(2%). 4. The weight of placenta was 757g and 706g in the postterm group and control group respectively. 5. 1, 5 minute Apgar score lower in the postterm group than control group. Conclusion : To decrease perinatal morbidity and cesarean rate at 42 or more weeks gestation, appropriate labor induction and twice weekly biophysical profile and USF(AI, Doppler) may be indicated.

소아 양성 발작성 어지럼증과 소아 편두통성 어지럼증의 비교

정연훈,조민정,최호석,이승주,이진석,전정민,백성수 대한평형의학회 2003 Research in Vestibular Science Vol.2 No.2

심근 허혈-재관류 백서 모델에서 mitogen-activated protein kinase 활성화에 대한 α-lipoic acid의 효과

김연경,박은미,최준호,윤경호,유남진,이은미,김남호,정진원,김민선,박병림,오석규 圓光大學校 醫科學硏究所 2006 圓光醫科學 Vol.21 No.1

고혈압 관리를 위한 의사지원결정시스템의 데이터 마이닝 접근

강석민,조승연,채영문,김태수,호승희 대한간질학회 2003 대한간질학회지 Vol.9 No.2

Fast Fabrication of Sub-200-nm Nanogrooves Using Liquid Crystal Material

Kim, Dae Seok,Cha, Yun Jeong,Gim, Min-Jun,Yoon, Dong Ki American Chemical Society 2016 ACS APPLIED MATERIALS & INTERFACES Vol.8 No.18

<P>Self-assembly of soft materials attracts keen interest for patterning applications owing to its ease and spontaneous behavior. We report the fabrication of nano grooves using sublimation and recondensation of liquid crystal (LC) materials. First, well-aligned smectic LC structures are obtained on the micron-scale topographic patterns of the microchannel; then, the sublimation and recondensation process directly produces nanogrooves having sub-200-nm scale: The entire process can be completed in less than 30 min. After it is replicated using an ultraviolet-curable polymer, our platform can be used as an alignment layer to control other guest LC materials.</P>

공공정보자원의 상업화 모델 개발 및 적용방안

홍필기,윤상오,방민석 한국정보사회진흥원 2007 정보화정책 Vol.14 No.3

본 논문의 목적은 공공정보자원의 활용도 제고 및 지식정보산업 육성을 통한 국가경쟁력 강화의 기반으로서, 공공정보자원의 상업화 모델을 개발하고 이를 적용하기 위한 주요 이슈를 점검하고 정책적 시사점을 제공하는 것이다. 이를 위하여 미국∙EU∙영국∙캐나다의 공공정보자원 활용 제고를 위한 상업화 정책과 상업화 모델로서 자금조달(Funding Model), 비용회수(Cost Recovery Model), 수익창출(Revenue Generation) 모델을 검토하였다. 이를 토대로 공공정보자원의 생명주기와 가치사슬 모델을 활용하여 ⅰ) 공공기관 직접 상업화, ⅱ) 민간계약 상업화, ⅲ) 민∙관 공동생산 상업화, ⅳ) 민간완전위탁 상업화라는 네가지 모델을 개발하고 장단점을 살펴보았다. 그리고 이러한 모델을 우리나라의 공공정보자원 상업화에 적용하기 위해서 선결되어야 할 주요 이슈로서 공공정보 상업화의 비전과 목표, 상업화의 대상 및 범위, 상업화의 주체, 공공정보 저작권, 요금부과 방식과 이윤배분∙활용 및 예산지원, 관련 법제도 정비 등을 검토하였다. This study formulates a strategy for commercial utilization of the public sector information(PSI) to promote efficient provision and effective utilization of information. Models for commercialization of the PSI are suggested in consideration of the life cycle perspectives and the commercial arrangements of the PSI. As to the life cycle perspectives, three stages of commercialization - Funding, Cost Recovery, and Revenue Generation - are proposed based on the analysis of cost structure and the economic viability of the public sector information. This paper also considers various types of commercialization scheme and suggests four types of business arrangement for commercialization of the PSI as a sustainable mechanism. Reviewing the literature on the major countries and organizations relevant to commercialization of the PSI, we examine each of four types of commercialization arrangement in the context of an information resource life cycle along a value chain of the PSI. The study also identifies key issues such as copyright and suggests relevant policies for PSI commercialization such as pricing scheme, related legal and institutional requirements. The suggestions in this study can be the foundation for further detailed researches and practical policies regarding the PSI commercialization.