헬스케어용 가다랑어(Katsuwonus pelamis) 통조림의 제조 및 특성

김현정 ( Hyeon Jeong Kim ),김민지 ( Min Ji Kim ),김기현 ( Ki Hyun Kim ),지성준 ( Seung Jun Ji ),임경훈 ( Kyung Hun Lim ),박권현 ( Kwon Hyun Park ),신준호 ( Joon Ho Shin ),허민수 ( Min Soo Heu ),김진수 ( Jin Soo Kim ) 한국수산과학회 2012 한국수산과학회지 Vol.45 No.3

This study was conducted to prepare canned skipjack tuna Katsuwonus pelamis in the mixture of isotonic beverage and tomato paste (ST-S) for use as a health food. An analysis of the time-temperature profile and viable cells showed that a reasonable F0 value for ST-S preparation was 4 min. The proximate composition of ST-S was 76.8% moisture, 20.2% crude protein, 0.8% crude lipid, 1.7% ash and 0.5% carbohydrate. The calorie content of ST-S was 94.8 kcal, which is 47.4% lower than that of commercial canned skipjack tuna in oil (ST-O) and 2.2% lower than that of commercial chicken breast in water (CB-B). The total amino acid content of ST-S was 18.54 g/100 g, which is 31.4% lower than that of ST-O and 7.9% lower than that of CB-B. The major amino acids in ST-S were aspartic acid and glutamic acid. An enrichment effect due to such minerals as phosphorus, potassium and iron would be expected on consuming 100 g of ST-S. The major fatty acids in ST-S were 16:0 (27.4%), 18:1n-9 (14.3%) and 22:6n-3 (27.8%), which are different from those in ST-O and CB-B. The major free amino acids in ST-S were glutamic acid (8.1%), histidine (38.6%) and its related dipeptide, such as anserine (15.7%). In an evaluation of taste, flavor and color, ST-S was found to be superior to ST-O and CB-B.

연구 논문 : 전기화학적 마이크로머시닝 기술을 이용한 균일한 니오븀 표면 에칭 연구

김경민 ( Kyung Min Kim ),유현석 ( Hyeon Seok Yoo ),박지영 ( Ji Young Park ),신소운 ( So Woon Shin ),최진섭 ( Jin Sub Choi ) 한국공업화학회 2014 공업화학 Vol.25 No.1

본 연구에서는 micro-contact printing을 통하여 니오븀 호일 표면 위에 균일한 에칭 pits를 형성하였다. 균일한 보호층을 형성하고자 전해연마의 효과를 확인하였으며, 기존의 O2 플라즈마 공정 없이 손쉽게 균일한 에칭 pits를 형성시킬 수 있는 조건을 확인하였다. 메탄올 혼합 전해질을 사용하여 10 min 동안 에칭을 진행한 결과 니오븀 호일 표면 위에 지름과 간격이 각각 10 μm와 5 μm로 잘 정렬된 에칭 pits를 관찰하였다. We describe the preparation of highly-ordered etching pits on the Nb foil through a micromachining. The effects of electro-chemical polishing on the formation of uniformly-patterned protective epoxy layer was investigated. Unlike the previous proc-ess using O2 plasma, well-ordered etched pits were prepared without any dry processes. As a result, the Nb foil with the well-ordered pits of 10 μm × 5 μm could be obtained by electrochemical etching in methanolic electrolytes for 10 min.

Studies on Lytic, Tailed Bacillus cereus-specific Phage for Use in a Ferromagnetoelastic Biosensor as a Novel Recognition Element

( In Young Choi ),( Joo Hyeon Park ),( Kyoung Min Gwak ),( Kwang-pyo Kim ),( Jun-hyun Oh ),( Mi-kyung Park ) 한국미생물생명공학회(구 한국산업미생물학회) 2018 Journal of microbiology and biotechnology Vol.28 No.1

This study investigated the feasibility of the lytic, tailed Bacillus cereus-specific phage for use in a ferromagnetoelastic (FME) biosensor as a novel recognition element. The phage was immobilized at various concentrations through either direct adsorption or a combination of 11-mercapto-1-undecanoic acid (11-MUA) and [N-(3-dimethylaminopropyl)-N’-carbodiimide hydrochloride and N-hydroxysuccinimide (EDC/NHS)]. The effects of time and temperature on its lytic properties were investigated through the exposure of B. cereus (4 and 8 logCFU/ml) to the phage (8 logPFU/ml) for various incubation periods at 22°C and at various temperatures for 30 and 60 min. As the phage concentration increased, both immobilization methods also significantly increased the phage density (p < 0.05). SEM images confirmed that the phage density on the FME platform corresponded to the increased phage concentration. As the combination of 11-MUA and EDC/NHS enhanced the phage density and orientation by up to 4.3-fold, it was selected for use. When various incubation was conducted, no significant differences were observed in the survival rate of B. cereus within 30 min, which was in contrast to the significant decreases observed at 45 and 60 min (p < 0.05). In addition, temperature exerted no significant effects on the survival rate across the entire temperature range. This study demonstrated the feasibility of the lytic, tailed B. cereus-specific phage as a novel recognition element for use in an FME biosensor. Thus, the phage could be placed on the surface of foods for at least 30 min without any significant loss of B. cereus, as a result of the inherent lytic activity of the B. cereus-specific phage as a novel recognition element.

연구보문 : 자연과학 ; 황산처리에 의한 불투수성 황근 종자의 발아촉진에 관한 연구

서상흠 ( Sang Heum Seo ),박민우 ( Min Woo Park ),장미하 ( Mi Ha Chang ),장일웅 ( Il Ung Jang ),심상인 ( Sang In Shim ),나영왕 ( Young Wang Na ),김수영 ( Soo Young Kim ),김석현 ( Seok Hyeon Kim ) 한국국제농업개발학회 2012 韓國國際農業開發學會誌 Vol.24 No.3

The reason of poor germination rate of hamabo mallow seed was speculated using TZ test to determine the viability of seed. Seeds showed high viability via TZ test were not germinated well. The quiescent seeds did not imbibed properly due to the hard seed coat and did not show further processes required for germination. Several well-known treatments for seed coat loosening and water uptake into seed were applied and compared for their efficiency. Stratification, hot water treatment, seed coat scarification, wet-cold treatment were revealed as less effective for improving germination although those treatments were common method for breaking dormant seed. Chemical scarification with sulfuric acid, however, effectively increased germinability and promptness index of hamabo mallow seeds. Optimal time for sulfuric acid treatment was 20 min. Seeds treated for 20 min showed improved germination percentage, germination speed, and promptness index of 80%, 13, and 1969 at 30 days after imbibition, respectively, in petri dish experiment. The values were greater than control seeds showed low values (12%, 1, and 183, respectively). The similar tendency was observed in the pot experiment that sulfuric acid treated seed were sown in artificially mixed soil (loamy soil:peatmoss:sand:compost = 5:2:2:1) and placed in greenhouse. Ultrastructure analysis of chemically scarified seed with sulfuric acid for 20 min by scanning electron microscopy did not show any noticeable changes in seed coat hardness and water uptake via hilum. But the only change after sulfuric acid treatment was removal of hilum cap that close the hilum and hider imbibition. Therefore, subsequent experiment was conducted to know the relationship between removal of hilum cap and facilitated imbibition by sulfuric acid treatment and whether the hilum cap removal directly influenced to the opening of micropyle. Water uptake velocity of seed treated for 20 min in concentrated sulfuric acid for was greater than control seed. This result implies that the crucial effect of sulfuric acid treatment is the removal of hilum cap that increase water uptake via micropyle in hamabo mallow.

공정단위장치로부터의 휘발성유기화합물질의 비산 배출량 산정

박영근,문정우,고민수,박현수,차순우,이선우,홍승철,김화용,이종협 한국화학공학회 2003 Korean Chemical Engineering Research(HWAHAK KONGHA Vol.41 No.3

공장내 설치되어 있는 수천개의 비산배출원으로부터 배출되는 VOCs의 양을 산정하기 위해서는 많은 비용과시간이 소요된다. 이러한 노력을 줄이기 위하여 전산모사방법을 이용하여 배출량을 예측하는 방법을 제시하였다. 예측된 값의 검증을 위하여 밸브, 플랜지 등의 비산배출원으로 구성되어 있는 실험장치를 고안하고 내부를 흐르는 유체의 종류 및 조건에 따른 배출량을 백포집법에 의해 샘플링하여 GC로 분석한 후, 분석된 데이터를 전산모사를 통해 얻은 결과와 비교하였다. 그 결과, 전산모사를 이용하여 밸브, 플랜지, 개방식라인으로부터 배출되는 벤젠과 톨루엔의 양을 예측할 수 있었다. Considerable effort and expense have been devoted to the estimation and acquisition of the amounts of VOCs relesed thousands of the fugitive emission sources installed in chemical processes. In order to reduce the effort required on the estimation of VOC release, a methodology using a computational fluid dynamics (CFD) was proposed. The estimated values were compared the experimental data obtained using a designed experimental apparatus that was composed of fugitive emission sources such as valves, pump, and flange. The emissions were sampling tedlar bags for a variety of volatile compounds at different pressures. The components were analyzed by a portable gas chromatograph. In conclusion, the amount of benzene and toluene released from fugitive emission sources could be successfully estimated using the CFD technique.

스트룹 테스트와 단순반응 테스트의 훈련 향상도에 관한 연구

조현우,박영민,박사엘,공추,왕초전,장신,김재화 순천향대학교 기초과학연구소 2022 순천향자연과학연구 논문집 Vol.28 No.1,2

This study which of the Stroop test training and simple response training can reduce the Stroop effect in the information processing process when continuous training is performed. 4 male students from S University(Asan-si) were divided into Stroop test training group(2) and simple reaction group(2). The test was conducted 10 times a day, and average was obtained and analyzed. The results encountered through this study are as follows. 1 The simple response training group improved more slowly than the Stroop test training group. 2. In the Stroop test training group, the rate of increase increased significantly compared to the simple response training group, but it did not increase once the record reached a certain point. 3. Simple response training at increasing values ​​was also trained on the Stroop effect. 4. In the average of phage values, both groups look similar.

비수도권 대학생 임대주거 실태 및 요구

박경옥, 송민경, 이종현 충북대학교 생활과학연구소 2013 생활과학연구논총 Vol.17 No.2

The purpose of this study is to propose the renal housing policy direction for undergraduates based on their actual rental housing conditions and needs who reside in non capital area. For the study, questionnaires were answered by 315 undergraduates of 3 universities who reside in rental housings in Cheongju-city. Major findings were as follows: (1) Most of undergraduate rental housings had the size from 12㎡ to 29㎡ and from 29㎡ to 41㎡, were multi-household studio type with room+bath+kitchen, and were typically monthly rent payment. (2) The needs of rental housings were the same as present residence. The possible monthly rent were mostly 300 thousand won, and the most preferred distance was under 10 minute walk from university. The assistance policy that undergraduates need was firstly the central/local governments' refurbished housing supply near university with low rent, and then deposited housing supply for undergraduates by LH corporation.

여성 하부요관석환자에서 무마취하 요관경하 배석술

박영호,송윤섭,임용순,김영호,이남규,구자현,서병욱,김민의,전윤수 순천향의학연구소 1999 Journal of Soonchunhyang Medical Science Vol.5 No.2

Although ureteroscopy(URS) has been used widely to remove ureteral calculi, there is an argument against the belief that anesthesia or admission is needed for URS. We evaluated the experience of URS without anesthesia in female patients. From September 1997 to July 1998, URS was performed in 31 female patients without anesthesia. EHL(Electrohydraulic Lithotripsy) was used in 21 patients with impacted or large stone over 5mm. All patients were given oral antibiotics for 3 days and follow-up KUB was taken to confirm successful removal of the stone one week after the procedure. Successful treatment was defined as complete removal of the stone or residual fragments less than 2mm. Overall success rate was 96.7%(30 cases among 31 cases). All but one patient tolerated with analgesia through the entire procedures. There were only minimal complications such as mild flank pain and hematuria. So, we recommend that non-anesthetic ureteroscopic removal of stone as the first choice for treatment of lower ureteral stones in female based on the minimal morbidity, high success rate and low cost.

치과용 금합금의 표면처리에 따른 교정용 브라켓의 전단결합강도 변화

민지현,황현식,이기헌,박병주 전남대학교 치과대학 2000 전남치대논문집 Vol.12 No.1

A bracket bonding to the dental gold alloy shows a lower bond strength than the natural teeth, and this can be a possible source of subsequent bond failure. This study aims to evaluate the effect of various gold alloy surface treatment techniques on shear bond strength between the orthodontic adhesives and the gold alloy and to find ways of increasing the bond strength. Two hundred and forty specimens made of the dental gold alloy were divided into twelve groups based on the combination of surface treatment methods(non-surface treatment, sandblasted, sandblasted plus tin-plated, and sandblasted plus intermediate adhesive) and adhesive systems(Ortho-one, Panavia 21, Superbond C&B). The specimens with brackets bonded were placed in distilled water at 37℃ for 24 hours and shear bond strength was measured by a universal testing machine. The results were as follows: 1. All surface-treated groups showed a significantly higher shear bond strength than non-surface-treated groups. 2. The sandblasted plus tin-plated group showed a significantly higher shear bond strength than the sandblasted group only when Panavia 21 was involved. 3. The sandblasted plus intermediate adhesive group showed a significantly higher shear bond strength than sandblasted group regardless of the type of adhesive used. 4. Of the three resin adhesive types, the Superbond C&B showed the highest bond strength, followed by Panavia 21 and Ortho-one. These findings suggest that a combination of sandblasting and intermediate resin treatment is desirable in order to enhance bracket bond strength regardless of adhesive types.

공동주택 바닥충격음 적정 평가어휘 조사에 관한 연구

송민정,송혁,이태강,기노갑,박현구,김선우 대한건축학회 2004 대한건축학회논문집 Vol.20 No.5

The "Sound Classification System on Floor Impact Sound Insulation Performance" is being studied in Korea. For that study, vocabularies appropriate for evaluation and reporting are needed. In this study, adequate words for evaluating floor impact sound have been extracted by reviewing the existing vocabularies and augmenting this with the results of a questionnaire prepared especially for apartment dwellers. As a result of this study, followings are suggested. 1) The heavy impact sound sources are more highly ranked than light impact ones. And the louder sound sources are the more accumulated points. 2) Highly ranked vocabularies are different for each source. 3) Floor impact sound evaluating words such as ‘Annoying’, ‘Disagreeable’, ‘Strident’, ‘Disturbed’, and ‘Dissonant’ are highly ranked. ‘Annoying’ is the word most accurately expressing the subjects' unpleasant feeling of domestic floor impact noise. 4)‘Unpleasant’, ‘Noisy’, ‘Irritating’, ‘Annoying’ are main unpleasant factors to floor impact sounds occurring in our domestic apartment houses.