안와골절의 외과적 접근에 대한 증례보고

민승기,이은택,오승환,이동근,고세욱,송종민,최성림 대한악안면성형재건외과학회 2002 Maxillofacial Plastic Reconstructive Surgery Vol.24 No.3

The Orbital fracture which is often combined with midface fracture can cause decreased visual acuity, limitation of eyeball movement, diplopia, enophthalmos, etc. Traumatic orbital fracture causes change of orbital volume, results in diplopia and enophthalmos thus, accurate repositioning of displaced bone and reconstruction of orbital defect with autogenous materials(cranial, rib, iliac bone, cartilage and fascia lata) or alloplastic materials(gelatin film, polyglactin mesh, methylmethacrylate, Teflon, silicone, Supermid, hydroxyapatite and metal). The key point of reconstruction of orbit is accurate repositioning of displaced orbital floor, lateral, medial orbital wall and sufficient bonegraft in anatomical defect. As this cases, we obtained good results through transconjunctival and coronal approach who were required orbital reconstruction. Also, we accurately diagnosed orbital fracture with C.T., 3D model and good result for orbital reconstruction with sufficient parietal block bone graft during average 16.8 months follow-up.

Effect of spark plasma sintering conditions on the thermoelectric properties of (Bi_0.25Sb_0.75)₂Te₃ alloys

Lim, Sang-Soon,Kim, Ju-Heon,Kwon, Beomjin,Kim, Seong Keun,Park, Hyung-Ho,Lee, Ki-Suk,Baik, Jeong Min,Choi, Won Jun,Kim, Dong-Ik,Hyun, Dow-Bin,Kim, Jin-Sang,Baek, Seung-Hyub Elsevier 2016 JOURNAL OF ALLOYS AND COMPOUNDS Vol.678 No.-

<P><B>Abstract</B></P> <P>As a field-assisted technique, spark plasma sintering (SPS) enables densification of specimens in a very short period of time compared to other sintering techniques. For high performance thermoelectric material synthesis, SPS is widely used to fabricate nanograin-structured thermoelectric materials by rapidly densifying the nanopowders suppressing grain growth. However, the microstructural evolution behavior of thermoelectric materials by SPS, another important process during sintering, has been rarely studied. Here, we explore SPS as a tool to control the microstructure by long-time SPS. Using p-type (Bi<SUB>0.25</SUB>Sb<SUB>0.75</SUB>)<SUB>2</SUB>Te<SUB>3</SUB> thermoelectric materials as a model system, we systematically vary SPS temperature and time to understand the correlations between SPS conditions, microstructural evolution, and the thermoelectric properties. Our results show that the relatively low eutectic temperature (∼420 °C) and the existence of volatile tellurium (Te) are critical factors to determine both microstructure and thermoelectric property. In the liquid-phase sintering regime, rapid evaporation of Te leads to a strong dependence of thermoelectric property on SPS time. On the other hand, in the solid-phase sintering regime, there is a weak dependence on SPS time. The optimum thermoelectric figure-of-merit (Z) of 2.93 × 10<SUP>−3</SUP>/K is achieved by SPS at 500 °C for 30 min. Our results will provide an insight on the optimization of SPS conditions for materials containing volatile elements with low eutectic temperature.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Spark plasma sintering (SPS) is used to synthesize the thermoelectric (Bi<SUB>0.25</SUB>Sb<SUB>0.75</SUB>)<SUB>2</SUB>Te<SUB>3</SUB>. </LI> <LI> Liquid phase and volatile element are a key for the microstructure and thermoelectric property. </LI> <LI> Thermoelectric figure-of-merit of 2.9 × 10<SUP>−3</SUP>/K is achieved at 500 °C for 30 min. </LI> </UL> </P>

온풍 조건에서 수분 탈락 정도에 따른 피부 분류 및 개선 방안에 대한 연구

권오선 ( Oh Sun Kwon ),강현종 ( Hyun Jong Kang ),한승민 ( Seung Min Han ),윤지선 ( Ji S Eon Yoon ),조웅희 ( Woong Hee Cho ),오주영 ( Joo Young Oh ),임준만 ( Jun Man Lim ),송영숙 ( Young Sook Song ),박선규 ( Sun Gyoo Park ) 대한화장품학회 2020 대한화장품학회지 Vol.46 No.2

피부를 탄력있고 부드럽게 하는 역할은 각질층에 존재하는 수분량에 의해 좌우된다. 피부 수분량은 냉온풍, 건조환경 등 다양한 환경 변화에 의해 영향을 받음이 알려져 있으나, 개인 피부 차이에 따른 피부수분량 변화와 회복 정도에 대해서는 많은 연구가 이루어 지지 않은 실정이다. 본 연구에서는 온풍 조건하에서 피시험자들의 피부 수분 탈락 및 회복 정도를 비교 평가하여 새로운 피부 타입을 제시하고, 온풍 조건에서 저하되는 피부 수분량을 개선 시켜주는 효능 물질을 개발하고자 하였다. 온풍 환경 조성을 위해, 건강한 피험자(남: 10 명, 여: 39 명, 25 세 - 63 세)의 전완부에 온풍(30 cm, 40 ℃, 6 m/s)을 30 min 간 피부에 노출시켜, 피부 수분량의 변화를 평가하였다. 26명(남: 4 명, 여: 22 명, 평균 연령: 42.7 ± 9.4)이 온풍 노출전에 비하여 온풍 노출 후 수분량이 유의하게 감소하며, 노출 후 30 min이 지나도 회복이 되지 않았다. 온풍노출 후 수분량이 떨어지는 피험자(여: 10 명)를 대상으로 보수력이 높은 크림을 3 주간 전완부에 적용한 이후 동일 온풍 조건하에서 피부 수분량을 측정한 결과, 노출 30 min 후 피부 수분량이 온풍 노출 전 수준으로 회복됨을 확인하였다. 본 연구를 통하여 피부는 건조 조건에서 쉽게 수분을 잃어버리는 피부(탈수형 피부)가 존재하는 것을 확인하였다. 이는 앞으로 화장품 개발을 보습 기능뿐만 아니라, 이러한 환경변화에 따른 피부수분이 쉽게 빠져나가는 피부(탈수형 피부)의 특성에 맞는 제품의 효능 개발이 필요함을 보여준다. Elasticity and softness of the skin depend on the level of moisture present in the stratum corneum, which is known to be affected by various environmental changes, such as cold and hot winds and dry environments. However, not many studies have been conducted on changes in skin moisture and the degree of recovery due to individual skin differences. In the present study, we aimed to investigate the effect of warm air heating on skin hydration levels and develop moisturizing formulas to improve lowered skin hydration levels. In order to deliver warm air heating condition, heating dryer (40 ℃, 6 m/s, 30 cm apart from forearm) was applied into inner forearm of healthy subjects (male: 10, female: 39, age: 25 - 63) Among 49 subjects, 26 subjects showed significantly lowered skin hydration levels until 30 min after warm air heating exposure (lowered group). In addition, moisturizing cream with high water holding capacity was applied to forearm of 10 subjects in lowered group for 3 weeks and skin hydration levels after warm air heating were significantly improved at the levels of before application of warm air heating. From this study, we found out that there is a skin type that skin hydration levels are significantly decreased under warm air heating condition (dehydrated skin) and this dehydrated skin can be improved by moisturizing formulas with high water holding capacity.

COPA(cuffed oropharyngeal airway)를 이용한 마취 유도 시 근이완제 사용 유무에 따른 반응

김상태,배진호,김상범,임승운,민병상,신영덕 대한마취과학회 2000 Korean Journal of Anesthesiology Vol.38 No.3

Background : COPA (cuffed oropharyngeal airway) is a convenient device for airway management in patients undergoing general anesthesia for elective surgery in supine position. It causes less pharyngeal trauma than LMA(Laryngeal mask airway). The purpose of this study was to compare the effect of COPA with and without muscle relaxant. Methods : Forty patients with ASA physical status I and II for elective surgery were randomly assigned to two groups. Anaesthesia was induced with propofol (2 mg/kg) and vecuronium (1.5 mg/kg) and was administered intravenously in Group I but not in Group II. Mask ventilation was done for 5 min with 0: 5 L/min. COPA was placed and heart rate, and systolic, mean, diastolic blood pressure and peak inspiratory pressure were measured at 1 min interval for 5 min. Anaesthesia was maintained with pro- pofol 150 ㎍/kg/min, fentanyl 1 ㎍/kg/hr, O_2 2 L/min and N_2O 2 L/min. Results : There were no significant differences between Group I and Group II in heart rate, systolic, mean and dstolic blood pressure. PIP (Peak inspiratory pressure) was increased and hiccups occurred significantly (p $lt; 0.05) in Group II. Complete airway obstruction occurred in one patient of Group I and severe coughing, body movements and gagging occurred during induction and insertion in Group II. conclusions : With the use of appropriate muscle relaxant, we can use COPA without increased inspiratory pressure or significant complication. (Korean J Anesthesiol 2000; 38: 399~403)

C -11 및 F - 18 표지 콜린의 합성과 체내동태에 관한 연구

전권수,유국현,김상욱,임상무,홍성운,서용섭,양승대,안순혁,허민구 대한핵의학회 2001 핵의학 분자영상 Vol.35 No.3

Objectives: Recently, [methyl-(11)^C]-(β-Hydroxyethyl)trimethylammonium ([(11)^C]choline) has been discovered to be a very effective tracer in imaging various human tumors using positron emission tomography. Because of the short half-life of C-11, it is very difficult to use in a routine imaging procedure and needs a frequent synthesis of [(11)^]choline. This can be supplemented by the substitution of [(11)^Ccholine with [methyS-18]fluorocholine. Here, we would like to report cell uptake and biodistribution of [(11)^Ccholine and [(18)^F]fluorocholine as a basic study. Methods [(11)^C]Choline was prepared by the treatment of [(11)^C]CHzI with N,N-dimethylaminoethanol and [18F]fluorocholine was synthesized from reaction of CHzBr[18F]F with N,N-dimethylaminoethanol. The radiochemical purity was checked by high performance liquid chromatography (HPLC). The biodistribution of [(11)^C]choline and [(18)^F]fluorocholine was determined in balb/c mouse at 5 min, 20 min, 40 min and 80 min. The cell uptake wa measured using glioma (9L) and colon adeocarcinoma (SW620). Results: The radiochemical purity was more than 98% after purification. In the liver, uptake did not change over time the uptake was 20/ID/g for [C]choline and 13%ID/g for [(18)^F]fluorocholine. In the kidney, radioactivity decreased over tirne the uptake was 15%1D/g for [(11)^Ccholine and 20%ID/g for [(18)^F]fluorocholine, 80 min post-injection. The cell uptake of [(11)^Ccholine was 4.93% for glioma (9L) and 18.69F for colon adenocarcinoma (SW620). For [(18)^F]fluorocholine, 1.77% for glioma (9L) and 2.77% for colon adenocarcinoma (SW620). Conclusion: [(11)^CCholine and [(18)^F]fluorocholine showed a different cell uptake tendency, depending on cancer cell line. (Korean J Nucl Med 200135:185-191)

회전축계의 진동제어용 ER 유체 댐퍼의 설계 및 반능동 비례제어

임승철,채정재,박상민 명지대학교 산업기술연구소 2001 産業技術硏究所論文集 Vol.20 No.-

This paper is concerned with the design and application of an Electro-Rheological(ER) fluid damper to suppress vibration of rotor systems. The example system at hand is flexible with a slender shaft and a thin disk, being su pported by two ball bearings. In addition, to investigate the system performances also in the high speed range, the driving torque is made to transmit through a speed increasing gear train. Along with the experiments, to predict and compare the ER damper effect, the rotor system is simulated as to its free and forced vibration characteristics. Such simulations are done by means of a finite element analysis code, which includes the mathematical model of the designed ER damper.

수지상 내생균근 Glomus Etunicatum의 접종이 석탄폐광지 토양에 식재한 아까시나무의 생육 및 생리에 미치는 영향

홍승진,임경민,박용우,구창덕,우성민 忠北大學校 農業科學硏究所 2012 農業科學硏究 Vol.28 No.2

본문참고

혈액 투석 환자에서 중심정맥 협착에 대한 스텐트 삽입술 : Wallstent Placement

임대승,노상필,이유선,정승현,김보영,이정우,강정아,김정희,이민수,정준용,최시완,정진옥,성인환,이강욱,신영태 충남대학교 의과대학 의학연구소 2002 충남의대잡지 Vol.29 No.1

Stenosis of central vein is a common complication arising after percutaneous subclavian vein catheter insertion performed for temporary vascular access in chronic renal failure patients undergoing hemodialysis. There are several treatment methods for the condition like percutaneous angioplasty(PTA), stent insertion, and surgery, but recent trend is toward PTA and stents. Among the patients diagnosed with chronic renal failure from March 1993 to May 2002 and undergoing hemodialysis through AV fistula, the 14 Patients in whom central vein stenosis arose were selected for the study. A total of 28 percutaneous interventions(5 PTA and 23 stent placement) were performed, and restenosis rate and the time taken till the restenosis in de novo lesions and instant lesions were compared. All 28 cases were operated successfully. The 14 cases that received both anigioplasty and stent placement initially. (de novo lesion : 14 cases), Among the 10 cases with de novo lesion that followed up more than 1 year, 3 cases are currently undergoing hemodialysis without restenosis, and the remaining 7 cases have recurred stenosis with the mean time to restenosis of 10.9 months. In the 7 cases in whom stenosis recurred, 11 interventions were done(instent lesion: 11 cases). 4 of these were using only ballon angioplasty with 100% restenosis rate and the mean time of 3 months until restenosis. The remaining 7 cases were using both balloon angioplasty and stent placement, also with 100% restenosis rate but with the mean time of 12 months until restenosis, which was later than the group receiving only balloon angioplasty. In treating the patients with central vein stenosis, stent placement seems to be more advantageous over PTA in terms of restenosis rate and the mean duration of patency. In the case of instent lesion, inserting the stent for the second time after stenosis recurred lengthened the duration of patency compared to performing balloon angioplasty alone.

Gullian Barre Syndrome 患者 1例에 대한 症例報告

임승민,안정조,최영,조현경,김민상,유병찬,오병렬,김윤식,설인찬 대전대학교 한방병원 2002 惠和醫學 Vol.11 No.1

Gullian Barre Syndrome is an acute symmetric polyradiculoneuropathy that typically presents as a progressive flaccid paralysis. The pathology is believed to be caused by both cellular and humoral immune processes The possibility of death is 3-5% and About 20% of patients require mechanical ventilaton. Recently We have experienced a patient who had suspected Gullian Barre Syndrome for 60days, his condition weakness and pain was impoved through the herb and acupucture Therefore I reported it for the treatment.

조달업무를 위한 전자상거래 모형 설계 및 구축

임재익,노승종,김민회,주영범 한국로지스틱스학회 1998 로지스틱스연구 Vol.6 No.2

현재 세계적으로 기업간의 전자상거래는 대부분 VAN이나 기업이 자체 구축한 전용망을 통한 EDI로 이루어지고 있다. VAN에 기반한 EDI는 업무프로세스의 단순화 및 비용절감에 상당한 효과를 거두고 있지만 이의 실현을 위해서는 EDI 전용망을 구축해야 하며 거래업체가 관련 소프트웨어 및 장비를 설치해야 하므로 소요비용을 부담할 수 있는 일정규모 이상의 기업만이 사용 가능하다. 또한 거래업무의 일괄처리로 인한 실시간 거래 요구 불만족과 같은 문제점을 가진다. 이러한 비용적, 운용적 측면의 이유 이외에도 기업간 거래가 국제화됨에 따라 VAN EDI를 벗어나서 인터넷을 기반으로 하는 개방형 EDI가 대두되고 있다. 인터넷은 기본적으로 개방성을 지향하고 있으며 이용요금이 저렴하기 때문에 새로운 거래상대자를 쉽게 유인할 수 있다. 따라서 인터넷의 보안문제와 같은 단점에도 불구하고 영세중소기업이나 단발적인 거래를 하는 업체들을 위해서는 인터넷을 통해 데이터를 교환하는 방법이 적절한 대안이 될 수 있다. 본 연구에서는 기존 VAN EDI 방식의 한계성을 논하고, 이를 극복하기 위한 대안으로 몇 가지 인터넷 기반 EDI방법론을 기술적 측면에서 정리하였으며, VAN과 인터넷을 통합하는 모형을 제시하였다. 또한 이를 바탕으로 한국통신 조달업무를 대상으로 한 인터넷 기반 EDI 시스템 프로토타입을 설계, 구현하였으며 향후 발전 방향을 모색하였다. This is to report the design and implementation of an electronic commerce platform for the Korea Telecom procurement process employing Web based EDI. The procurement process is analyzed adopting the business analysis technique and the data modeling. Core sub-processes are identified including announcement, bidding, and contract. An Web-based EDI scheme is designed using the business and information modeling technique and the process decomposition technique. A prototype platform is implemented employing Access, Visual Basic, and FrontPage.