MnO2/carbon nanotube-embedded carbon nanofibers as core–shell cables for high performing asymmetric flexible supercapacitors

Cheng-Liang Huang,Li-Ming Chiang,Chien-An Su,YUAN-YAO LI 한국공업화학회 2021 Journal of Industrial and Engineering Chemistry Vol.103 No.-

Supercapacitors (SCs) are important devices for energy storage because they provide a higher power densityas compared to that of batteries. However, SCs with high energy density and good flexibility are stillunder development. In this study, we fabricated MnO2-coated Carbon nanotube (CNT)-embedded carbonnanofiber (CNF) (referred to as MnO2/CNF-CNT) core–shell cables to investigate pseudo-capacitators,while activated CNF-CNTs obtained by CO2 activation was used for Electrical double-layer capacitors(EDLCs). Owing to the unique structure of the materials and high electrical conductivity of the CNTson the CNFs, a specific capacitance of 483.5 F/g was achieved using MnO2/CNF-CNT mat with 1 MNa2SO4 aqueous electrolyte at 0.5 A/g. A flexible MnO2/CNF-CNT supercapacitor was assembled, whichwas binder-free, electrically conductive media-free, and current collector-free. Further an asymmetricsupercapacitor was assembled with the MnO2/CNF-CNT mat and activated CNF-CNT mat in an ionic liquid(1-ethyl-3-methylimidazolium bis (trifluoromethylsulfonyl) imide) electrolyte. The maximum specificcapacitance of, energy density of and power density of 94.25 F/g, 209.4 Wh/kg and 1000 W/kg can beachieved with the asymmetric supercapacitor at 0.5 A/g and 4.0 V. We believe that these materials havesignificant potential for use in light-weight and flexible SCs.

Microwave dielectric properties of (1 - x)(Mg0.95Co0.05)TiO3–x(Na0.5La0.5)TiO3 ceramic system

Cheng-Liang Huang,Jhih-Yong Chen,Yen-Hsing Wang,Bing-Jing Li 한국물리학회 2009 Current Applied Physics Vol.9 No.6

The microstructures and the microwave dielectric properties of the (1 - x)(Mg0.95Co0.05)TiO3– x(Na0.5La0.5)TiO3 ceramic system were investigated. Two-phase system was confirmed by the XRD patterns and the EDX analysis. A co-existed second phase (Mg0.95Co0.05)Ti2O5 was also detected. The microwave dielectric properties are strongly related to the density and the matrix of the specimen. A new microwave dielectric material 0.88(Mg0.95Co0.05)TiO3–0.12(Na0.5La0.5)TiO3, possessing an excellent combination of dielectric properties: εr ~22.36, Q × f ~ 110,000 GHz (at 9 GHz), τf ~ 2.9 ppm/℃), is proposed as a candidate dielectric for GPS patch antennas. The microstructures and the microwave dielectric properties of the (1 - x)(Mg0.95Co0.05)TiO3– x(Na0.5La0.5)TiO3 ceramic system were investigated. Two-phase system was confirmed by the XRD patterns and the EDX analysis. A co-existed second phase (Mg0.95Co0.05)Ti2O5 was also detected. The microwave dielectric properties are strongly related to the density and the matrix of the specimen. A new microwave dielectric material 0.88(Mg0.95Co0.05)TiO3–0.12(Na0.5La0.5)TiO3, possessing an excellent combination of dielectric properties: εr ~22.36, Q × f ~ 110,000 GHz (at 9 GHz), τf ~ 2.9 ppm/℃), is proposed as a candidate dielectric for GPS patch antennas.

Investigation of the electrical properties of metal–oxide–metal structures formed from RF magnetron sputtering deposited MgTiO3 films

Cheng-Liang Huang,Sih-Yin Wang,Yuan-Bin Chen,Bing-Jing Li,Ying-Hong Lin 한국물리학회 2012 Current Applied Physics Vol.12 No.3

Thin films of MgTiO3 high-k dielectric have been prepared by RF magnetron sputtering deposition at various substrate temperatures. X-ray diffraction, atomic force microscopy were used to characterize the deposited films. Experimental results show that substrate temperature has little effect on the stoichinometry. The electrical properties of MgTiO3 metaleinsulatoremetal (MIM) capacitors were investigated at various deposition temperatures, Pt/MgTiO3/Pt/SiO2/n-Si, were studied. It is shown that the MgTiO3 (210 nm) MIM capacitor fabricated at 200 ℃ shows an overall high performance, such as a high capacitance density of w1.2 nF/um2, a low leakage current of 1.51 × 10-9 A/cm2 at 5 V, low-voltage coefficients of capacitance, and good frequency dispersion properties. All of these indicate that the MgTiO3 MIM capacitors are very suitable for use in Si analog circuit application or dynamic random access memory (DRAM) cell. Thin films of MgTiO3 high-k dielectric have been prepared by RF magnetron sputtering deposition at various substrate temperatures. X-ray diffraction, atomic force microscopy were used to characterize the deposited films. Experimental results show that substrate temperature has little effect on the stoichinometry. The electrical properties of MgTiO3 metaleinsulatoremetal (MIM) capacitors were investigated at various deposition temperatures, Pt/MgTiO3/Pt/SiO2/n-Si, were studied. It is shown that the MgTiO3 (210 nm) MIM capacitor fabricated at 200 ℃ shows an overall high performance, such as a high capacitance density of w1.2 nF/um2, a low leakage current of 1.51 × 10-9 A/cm2 at 5 V, low-voltage coefficients of capacitance, and good frequency dispersion properties. All of these indicate that the MgTiO3 MIM capacitors are very suitable for use in Si analog circuit application or dynamic random access memory (DRAM) cell.

Localized surface plasmon resonance enhanced by the light-scattering property of silver nanoparticles for improved luminescence of polymer light-emitting diodes

Cheng-Liang Huang,Hung Ji Huang,Sy-Hann Chen,Yu-Siang Huang,Po-Ching Kao,Yuan-Fong Chou Chau,Hai-Pang Chiang 한국공업화학회 2021 Journal of Industrial and Engineering Chemistry Vol.103 No.-

This study used photochemical reduction to successfully synthesize triangular silver nanoplates (TAgNPs)and silver nanodecahedrons (AgNDs) with higher light-absorption and higher light-scattering properties,respectively, for the same wavelength. To analyze the contribution of light-absorption and lightscatteringof silver nanoparticles to the localized surface plasmon resonance (LSPR) effect, poly(3,4-ethylenedioxythiophene) polystyrene sulfonate was doped with TAgNPs or AgNDs at the same concentration(1.17 lg/cm2) and made into polymer light-emitting diodes (PLEDs). According to the current densityvoltageluminancecharacteristics and electroluminescence (EL) spectra, the enhancement factors for currentefficiency and EL intensity for AgND-containing PLEDs were found to be higher than those for PLEDwith TAgNPs by 24.9% and 138%, respectively. This shows that the metal nanoparticles with higher lightscatteringproperty can induce a relatively strong LSPR effect, which possibly gives a hint to design plasmonicphotovoltaic in future.

Scaling up the in-hospital hepatitis C virus care cascade in Taiwan

( Chung-feng Huang ),( Pey-fang Wu ),( Ming-lun Yeh ),( Ching-i Huang ),( Po-cheng Liang ),( Cheng-ting Hsu ),( Po-yao Hsu ),( Hung-yin Liu ),( Ying-chou Huang ),( Zu-yau Lin ),( Shinn-cherng Chen ),( 대한간학회 2021 Clinical and Molecular Hepatology(대한간학회지) Vol.27 No.1

Background/Aims: Obstacles exist in facilitating hepatitis C virus (HCV) care cascade. To increase timely and accurate diagnosis, disease awareness and accessibility, in-hospital HCV reflex testing followed by automatic appointments and a late call-back strategy (R.N.A. model) was applied. We aimed to compare the HCV treatment rate of patients treated with this strategy compared to those without. Methods: One hundred and twenty-five anti-HCV seropositive patients who adopted the R.N.A. model in 2020 and another 1,396 controls treated in 2019 were enrolled to compare the gaps in accurate HCV RNA diagnosis to final treatment allocation. Results: The HCV RNA testing rate was significantly higher in patients who received reflex testing than in those without reflex testing (100% vs. 84.8%, P<0.001). When patients were stratified according to the referring outpatient department, a significant improvement in the HCV RNA testing rate was particularly noted in patients from non-hepatology departments (100% vs. 23.3%, P<0.001). The treatment rate in HCV RNA seropositive patients was 83% (83/100) after the adoption of the R.N.A. model, among whom 96.1% and 73.9% of patients were from the hepatology and non-hepatology departments, respectively. Compared to subjects without R.N.A. model application, a significant improvement in the treatment rate was observed for patients from non-hepatology departments (73.9% vs. 27.8%, P=0.001). The application of the R.N.A. model significantly increased the in-hospital HCV treatment uptake from 6.4% to 73.9% for patients from non-hepatology departments (P<0.001). Conclusions: The care cascade increased the treatment uptake and set up a model for enhancing in-hospital HCV elimination. (Clin Mol Hepatol 2021;27:136-143)

Classification of particles in particle-laden stream through a stainless steel fibrous filter

Cheng-Hsiung Huang,Chung-Liang Chang,Tser-Sheng Lin 한국화학공학회 2007 Korean Journal of Chemical Engineering Vol.24 No.3

investigation experimentally explores the penetration curve of particles shot onto a stainles steelt-ing, on the particle penetration was examined at various flow rates, nozzle diameters and dimensionless particle diam-eters, Sqrt(Stk). The penetration of the flat surface by particles was also determined for comparison. Experimental re-sults demonstrate that oleic acid particles larger than Sqrt(Stk)50 are collected on the stainless steel fibrous filter witha low penetration, while smaller particles stay in the particle-laden stream with high penetration. The penetration ofpotassium chloride particles exceeds that of oleic acid particles, because potassium chloride particles bounce off thestainless steel fibrous filter and the flat surface. Particles bounce of the metal filter less easily than the flat surface.Coating the stainless steel fibrous filter with oil effectively reduces problems of particle bounce. The potasium chlorideparticles sucked the coated oil forming a small mountain on the surface. When the loaded particle mass on the coatedstainless steel fibrous filter ranges between 0.4 and 2.3 mg, Sqrt(Stk)50 is a constant 0.35.

High-Performance Bottom-Contact Organic Thin-Film Transistors Based on Benzo[<i>d</i>,<i>d</i>′]thieno[3,2-<i>b</i>;4,5-<i>b</i>′]dithiophenes (BTDTs) Derivatives

Huang, Peng-Yi,Chen, Liang-Hsiang,Kim, Choongik,Chang, Hsiu-Chieh,Liang, You-jhih,Feng, Chieh-Yuan,Yeh, Chia-Ming,Ho, Jia-Chong,Lee, Cheng-Chung,Chen, Ming-Chou American Chemical Society 2012 ACS APPLIED MATERIALS & INTERFACES Vol.4 No.12

<P>Three benzo[<I>d</I>,<I>d</I>′]thieno[3,2-<I>b</I>;4,5-<I>b</I>′]dithiophene (<B>BTDT</B>) derivatives, end-functionalized with benzothiophenyl (<B>BT-BTDT</B>; <B>2</B>), benzothieno[3,2-b]thiophenyl (<B>BTT-BTDT</B>; 3), and benzo[<I>d</I>,<I>d</I>′]thieno[3,2-<I>b</I>;4,5-<I>b</I>′]dithiophenyl (<B>BBTDT</B>; <B>4</B>), were prepared for bottom-contact/bottom-gate organic thin-film transistors (OTFTs). An improved one-pot [2 + 1 + 1] synthetic method of <B>BTDT</B> with improved synthetic yield was achieved, which enabled the efficient realization of new <B>BTDT</B>-based semiconductors. All of the <B>BTDT</B> compounds exhibited high performance p-channel characteristics with carrier mobilities as high as 0.34 cm<SUP>2</SUP>/(V s) and a current on/off ratio of 1 × 10<SUP>7</SUP>, as well as enhanced ambient stability. The device characteristics have been correlated with the film morphologies and microstructures of the corresponding compounds.</P><P><B>Graphic Abstract</B> <IMG SRC='http://pubs.acs.org/appl/literatum/publisher/achs/journals/content/aamick/2012/aamick.2012.4.issue-12/am3022448/production/images/medium/am-2012-022448_0010.gif'></P><P><A href='http://pubs.acs.org/doi/suppl/10.1021/am3022448'>ACS Electronic Supporting Info</A></P>

Protective Immune Response of Bacterially-Derived Recombinant FaeG in Piglets

Huang Yahong,Wanqi Liang,Aihu Pan,Zhiai Zhou,Qiang Wang,Cheng Huang,Jianxiu Chen,Dabing Zhang 한국미생물학회 2006 The journal of microbiology Vol.44 No.5

FaeG is the key factor in the infection process of K88ad enterotoxigenic Escherichia coli(ETEC) fimbrial adhesin. In an attempt to determine the possibility of expressing recombinant FaeG with immunogenicity for a new safe and high-production vaccine in E. coli, we constructed the recombinant strain, BL21 (DE3+K88), which harbors an expression vector with a DNA fragment of faeG, without a signal peptide. Results of 15% SDS-polyacrylamide slab gel analysis showed that FaeG can be stably over-expressed in BL21 (DE3+K88) as inclusion bodies without FaeE. Immunoglobulin G (IgG) and M (IgM) responses in pregnant pigs, with boost injections of the purified recombinant FaeG, were detected 4 weeks later in the sera and colostrum. An in vitro villius-adhesion assay verified that the elicited antibodies in the sera of vaccinated pigs were capable of preventing the adhesion of K88ad ETEC to porcine intestinal receptors. The protective effect on the mortality rates of suckling piglets born to vaccinated mothers was also observed one week after oral challenge with the virulent ETEC strain, C83907 (K88ad, CT+, ST+). The results of this study proved that the adhesin of proteinaceous bacterial fimbriae or pili could be overexpressed in engineered E. coli strains, with protective immune responses to the pathogen.

Value of CT in the Discrimination of Fatal from Non-Fatal Stercoral Colitis

Cheng-Hsien Wu,Chen-Chih Huang,Li-Jen Wang,Yon-Cheong Wong,Chao-Jan Wang,Wan-Chak Lo,Being-Chuan Lin,Yung-Liang Wan,Chuen Hsueh 대한영상의학회 2012 Korean Journal of Radiology Vol.13 No.3

Objective: Clinical presentation and physical signs may be unreliable in the diagnosis of stercoral colitis (SC). This study evaluates the value of computed tomography (CT) in distinguishing fatal from non-fatal SC. Materials and Methods: Ten patients diagnosed as SC were obtained from inter-specialist conferences. Additional 13 patients with suspected SC were identified via the Radiology Information System (RIS). These patients were divided into two groups; fatal and non-fatal SCs. Their CT images are reviewed by two board-certified radiologists blinded to the clinical data and radiographic reports. Results: SC occurred in older patients and displayed no gender predisposition. There was significant correlation between fatal SC and CT findings of dense mucosa (p = 0.017), perfusion defects (p = 0.026), ascites (p = 0.023), or abnormal gas (p = 0.033). The sensitivity, specificity, and accuracy of dense mucosa were 71%, 86%, and 81%, respectively. These figures were 75%, 79%, and 77% for perfusion defects; 75%, 80%, and 78% for ascites; and 50%, 93%, and 78% for abnormal gas, respectively. Each CT sign of mucosal sloughing and pericolonic abscess displayed high specificity of 100% and 93% for diagnosing fatal SC, respectively. However, this did not reach statistical significance in diagnosing fatal SC. Conclusion: CT appears to be valuable in discriminating fatal from non-fatal SC. Objective: Clinical presentation and physical signs may be unreliable in the diagnosis of stercoral colitis (SC). This study evaluates the value of computed tomography (CT) in distinguishing fatal from non-fatal SC. Materials and Methods: Ten patients diagnosed as SC were obtained from inter-specialist conferences. Additional 13 patients with suspected SC were identified via the Radiology Information System (RIS). These patients were divided into two groups; fatal and non-fatal SCs. Their CT images are reviewed by two board-certified radiologists blinded to the clinical data and radiographic reports. Results: SC occurred in older patients and displayed no gender predisposition. There was significant correlation between fatal SC and CT findings of dense mucosa (p = 0.017), perfusion defects (p = 0.026), ascites (p = 0.023), or abnormal gas (p = 0.033). The sensitivity, specificity, and accuracy of dense mucosa were 71%, 86%, and 81%, respectively. These figures were 75%, 79%, and 77% for perfusion defects; 75%, 80%, and 78% for ascites; and 50%, 93%, and 78% for abnormal gas, respectively. Each CT sign of mucosal sloughing and pericolonic abscess displayed high specificity of 100% and 93% for diagnosing fatal SC, respectively. However, this did not reach statistical significance in diagnosing fatal SC. Conclusion: CT appears to be valuable in discriminating fatal from non-fatal SC.

The Effects of Chicken Leg Bone Extract on Antioxidative Properties under Different Heating Condition

Cheng, Fu-Yuan,Wan, Tien-Chun,Huang, Chao-Wei,Tominaga, Kana,Lin, Liang-Chuan,Sakata, Ryoichi Asian Australasian Association of Animal Productio 2008 Animal Bioscience Vol.21 No.12

The aim of this study was to extract chicken leg bone, which is a by-product of industrial poultry processing, using different heating temperatures (80, 90 and $100^{\circ}C$) and durations (5, 10 and 15 min). The pH value, soluble protein content, peptide content and antioxidative properties, including superoxide anion scavenging ability, 1, 1-diphenyl-2-picrylhydrazyl (DPPH) free radical scavenging ability, reducing capacity and inhibitory activity of linoleic acid peroxidation, were measured. The results showed no significant differences (p>0.05) in pH value among all treatments. Decreased soluble protein content and peptide content were observed in chicken leg bone extract obtained under higher heating temperatures (90 or $100^{\circ}C$) and longer heating durations (10 or 15 min). In antioxidative properties, the extracts which were heated at 90 or $100^{\circ}C$ for 15 min exhibited significantly higher superoxide anion scavenging ability, DPPH free radical scavenging ability, reducing capacity and inhibitory activity of linoleic acid peroxidation (p<0.05).