http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
수종의 니켈-티타늄 폐쇄형 코일 스프링의 하중-변위 특성 및 소성 변형 비교
손아영,임성훈 대한치과교정학회 2009 대한치과교정학회지 Vol.39 No.5
Objective: NiTi closed coil springs were reported to have relatively constant unloading forces. However, the characteristics of NiTi closed coil springs from various manufacturers have not been elucidated. The purpose of this study was to compare load-deflection characteristics of various NiTi closed coil springs and to find out the optimal range of extension. Methods: Seven kinds of NiTi closed coil springs from five manufacturers were tested. Load deflection curves were obtained at extension ranges from 2 mm to 30 mm. Also, springs were kept extended during a 4 week period, and then load deflection curves were obtained again. Results: Sentalloy (Tomy) and Jinsung blue (Jinsung) showed superelasticity in every extension ranges tested and showed plastic deformation of less than 1 mm. Ni-Ti (Ormco) showed superelasticity only after the springs were extended at or more than 10 mm, thereby meaning that clinicians should extend these springs at or more than 10 mm to utilize the superelasticity. Orthonol (RMO) and Nitanium (Ortho Organizers) did not show superelasticity. After 4 weeks of extension, all springs showed plastic deformation less than 1 mm when the extension was at or under 25 mm. Conclusions: The superelastic behavior of NiTi closed springs were different among various NiTi spring products, and some NiTi closed springs failed to show superelasticity. 폐쇄형 니켈-티타늄 코일 스프링은 탈부하 과정에서 힘이 거의 일정하게 유지되는 초탄성을 보이는 것으로 알려져있으나, 각 제조사에 따른 니켈-티타늄 스프링의 실제 특성에 대한 보고는 부족하다. 따라서 본 연구에서는 수종의 폐쇄형 니켈-티타늄 코일 스프링들의 하중-변위 특성과 소성 변형에 대해 비교하고 임상적으로 적용 가능한 신장 범위에 대해서 알아보고자 하였다. 다섯 개 제조회사에서 생산된 일곱 종의 폐쇄형 니켈-티타늄 코일 스프링을 각 종류별로 2 mm, 5 mm, 10 mm, 15 mm, 20 mm, 25 mm, 30 mm로 신장시켜 하중-변위 곡선을 얻은 후 같은 길이로 4주간 유지시킨 후 다시 하중-변위 곡선을 얻었다. 실험 결과 Sentalloy (Tomy, Tokyo, Japan), Jinsung (Jinsung, Seoul, Korea)은 모든 범위에서 초탄성을 나타내며 영구변형도 1 mm 이하로 작아 가장 바람직한 물성을 보였다. 반면 Ni-Ti (Ormco, Orange, CA, USA)는 10 mm부터 초탄성 구간을 보였는데, 이는 이러한 스프링을 적용 시에는 10 mm 이상 신장시켜야 초탄성 성질을 활용할 수 있다는 것을 의미한다. Orthonol (RMO, Denver, CO, USA)과 Nitanium (Ortho Oganizers, San Marcos, CA, USA)은 초탄성을 보이지 않았다. 4주 동안 신장 후의 소성 변형 정도를 측정한 결과 25 mm 이내의 신장 범위에서는 1 mm 이하의 소성 변형만이 나타났다. 폐쇄형 니켈-티타늄 코일스프링의 초탄성 성질은 제조사에 따라 다양하게 나타났으므로, 임상 적용 시 이를 고려하는 것이 바람직하다.
가설설정에서 그럴듯한 점, 발전시킬 점, 우려되는 점으로 질문하는 활동으로 화학 실험을 경험한 대학생들의 창의적 문제 해결력
손아영,강순희 이화여자대학교 교과교육연구소 2014 교과교육학연구 Vol.18 No.4
본 연구에서는 대학교1학년 학생들이 수강하는 일반 화학 실험에서 가설설정 하기를 그럴 듯 한점, 발전시킬점, 우려되는 점으로 질문하고 쓰게 하는 PPC 질문 기법으로 활동하는 한 학기용 실험 교수 전략을 개발하였다. 본 연구에서 개발한 한 학기용 총 10개 주제의 실험들을 적용한 후에, 본 실험 교수 전략을 경험한 실험반과 그렇지 아니한 비교반 학생들의 발산적 사고력인 협의의 창의적 사고력의 변화를 분석하였다. 그리고 탐구 기능 측면으로 비판적 사고력의 변화도 분석하였다. 적용한 실험 교수 전략을 한 학기 동안 경험한 학생들의 협의의 창의적 사고력이 통계적으로 유의미하게 향상된다(p <.05)는 결론을 얻을 수 있었다. 또한 협의의 창의적 사고력의 3개 하위 요소들인 유창성, 융통성 그리고 독창성에서 통계적으로 모두 유의미하게 향상되었다(p <.05). 그리고 이 학생들의 문제 해결 측면인 탐구 기능에 대한 비판적 사고력도 통계적으로 유의미하게 향상되었다(p <.05). 또한 탐구 기능에 대한 비판적 사고력인 5개 하위 요소들 중에서 가설 설정 능력에 대한 비판적 사고력은 통계적으로 유의미하게 향상되었으나(p <.05), 문제인식능력, 변인통제능력, 자료 해석 및 자료변환능력, 결론 도출 및 일반화 능력에 대한 비판적 사고력은통계적으로 유의미하게 향상되지 않았다(p >.05). 이는 대학교 실험 수업에서 대학생들의 협의의 창의적 사고력을 신장시키는 실험 교수 전략을 제공하기 위한 기초 자료로 활용 될 수 있을 것이다. ‘This study examined the efficacy of ’Positives-Possibilities-Concerns’ question activities about making hypotheses, for the purpose of enhancing creative problem solving thinking of pre-service science teachers in college. Ten ‘PPC’ question activities were presented as teaching materials to students over one semester. The experimental group showed a statistically meaningful improvement in creative thinking skills(p<.05). In addition, the three sub-elements of creative thinking skills, i.e., fluency, flexibility and originality, all showed statistically meaningful improvement(p<.05). Also, there was significant statistical improvement in critical thinking skill with respect to the inquiry thinking skill(p<.05). The sub-elements of critical thinking skills and making hypotheses showed a statistically meaningful improvement (p<.05), but there were no significant statistical improvements in recognition of problems, control of variables, transformation and nterpretation of data, and making conclusions and generalizations(p>.05). This result may become the basis for the enhancement of creative problem solving thiunking in the general chemistry laboratory in college for the future.
Young Ah Kim,Sang Sun Lee,Young Jun Son 대한임상검사정도관리협회 2020 Journal of Laboratory Medicine And Quality Assuran Vol.42 No.2
Background: Clostridioides difficile infection (CDI) is the most essential cause of antimicrobial-related diarrhea in hospitalized patients. It is also considered as an important hospital-acquired infection. Adequately performing the laboratory diagnostic tests for CDI is critical for the control and treatment of CDI in healthcare facilities. This study focused on the management of the extra-analytical phase to secure quality assurance of the diagnostic tests for CDI. Methods: We analyzed the volume and pattern of requested C. difficile - related tests from patients in 2018. The culture-positive rate was compared with the stool quality. Finally, the clinical characteristics of antibiotic-related diarrhea were compared based on whether toxigenic C. difficile was isolated. Results: Culture plus toxin enzyme immunoassay was the most common pattern; however, it showed low positive rates for toxigenic C. difficile . The culture-positive rates were not different according to the Bristol stool form scale. The significant risk factors for the detection of toxigenic C. difficile in patients with antibiotic-associated diarrhea were inhibitor-combined penicillin or cephalosporin (odds ratio [OR], 5.060; 95% confidence interval [CI], 1.317–19.447; P =0.0183) and extended-spectrum cephalosporin (OR, 16.224; 95% CI, 3.166–83.134; P =0.0008). Conclusions: The pre-pre-analytical errors are easy to overlook in routine laboratory procedures. Our findings could provide a good example of the management of the extra-analytical phase to secure quality assurance of the diagnostic tests for CDI.
Effect of genetic background differences between FVB and C57BL/6 mice in SARS-CoV-2 infection
Ah-Reum Kang,Hyun Ah Noh,Jae Hyung Son,Sun-Min Seo,Ji-Hun Lee,Na-Won Kim,Eun-Seon Yoo,Han-Bi Jeong,Da In On,Ji Yun Jang,Jun-Won Yun,Jun Won Park,Kang-Seuk Choi,Ho-Young Lee,Jun-Young Seo,Ki Taek Nam,J 한국실험동물학회 2022 한국실험동물학회 학술발표대회 논문집 Vol.2022 No.7
A nationwide cohort study on coronavirus disease 2019 and patients with psoriasis in Korea
( Young Ah Cho ),( Yi Na Yoon ),( Jae Young Sung ),( Hyung Seok Son ),( Chang Yong Kim ),( Ji Su Lee ),( Sung Min Kim ),( Da Ae Yu ),( Yang Won Lee ),( Yong Beom Choe ) 대한피부과학회 2022 대한피부과학회 학술발표대회집 Vol.74 No.1
GC-ECD를 이용한 농산물 중 제초제 aclonifen의 공정분석법 확립
고아영 ( Ah Young Ko ),김희정 ( Hee Jung Kim ),장진 ( Jin Jang ),이은향 ( Eun Hyang Lee ),주윤지 ( Yoon Ji Joo ),권찬혁 ( Chan Hyeok Kwon ),손영욱 ( Young Wook Son ),장문익 ( Moon Ik Chang ),이규식 ( Gyu Seek Rhee ) 한국환경농학회 2014 한국환경농학회지 Vol.33 No.4
BACKGROUND: Aclonifen is used as a systemic and selective herbicide to control a wide spectrum broad-leaf weeds by inhibition carotenoid biosynthesis, and then its MRLs(Maximum Residue Limits) will be determined in onion and garlic. In this study, a new official method was developed for aclonifen determination in agricultural products to routinely inspect the violation of MRL as well as to evaluate the terminal residue level. METHODS AND RESULTS: Aclonifen was extracted from crop samples with acetone and the extract was partitioned with dichloromethane and then purified by silica solid phase extraction(SPE) cartridge. The purified samples were detected GC using an ECD detector. Limits of detection(LOD) was 0.001 mg/kg and quantification(LOQ) was 0.005 mg/kg, respectively. For validation purposes, recovery studies were carried out at three different concentration levels (LOQ, 10×LOQ, 50×LOQ, n=5). Therecoveries were ranged from 74.3 to 95.0% with relative standard deviations(RSDs) of less than 8%. All values were consistent with the criteria ranges requested in the Codex guidelines(CAC/GL 40). CONCLUSION: The proposed analytical method was accurate, effective and sensitive for aclonifen determination and it will be used to as an official method in Korea.