HSDPA시스템에서 수신 SIR기반의 유연한 채널 할당 방식의 공평한 스케줄링 기법에 관한 연구

이승환,김성원,박용완,Lee, Seung-Hwan,Kim, Sung-Won,Park, Yong-Wan 한국통신학회 2007 韓國通信學會論文誌 Vol.32 No.9a

본 논문은 HSDPA시스템에서 높은 전송 수율을 내면서도 기존 알고리즘에 비해 높은 공평성을 보장하는 스케줄링 알고리즘을 제안한다. 이 알고리즘은 할당하는 채널의 개수를 기지국에 수신된 SIR값에 매겨진 등급에 따라 다르게 할당하고 남는 채널을 다른 사용자에게 할당하여 전송 수율도 높으면서도 보다 많은 사용자에게 서비스를 하여 공평성도 향상시키는 기법이다. 실시간 및 비 실시간 데이터의 종류에 따라 전송 수율 및 공평성의 비율을 비교한 결과 기존의 알고리즘인 비례공정 알고리즘에 비해 높은 전송 수율을 보이고 MAX CIR과 유사한 전송 수율을 나타내고 MAX CIR 알고리즘에 비해 높은 공평성을 보여준다. In this paper, a fairness scheme is proposed that assigns different number of HS-PDSCH to the service user according to the received SIR of CPICH. Assigned channel number is determined by the SIR level. The highest SIR user gets the number of channels based on the SIR table and the remained channels are assigned to the other SIR users. This scheme can serve the similar maximum service throughput and higher fairness than MAX CIR packet scheduling algorithm. This scheme can also serve the higher service throughput than Proportional Fairness scheme.

지능형 U-Car에서 IEEE 802.11b을 이용한 차량 내 데이터 무선 랜 전송 성능 분석

이승환,허수정,박용완,이상신,이동학,유재황,Lee Seung-Hwan,Heo Soo-Jung,Park Yong-Wan,Lee Sang-Shin,Lee Dong-Hahk,Yu Jae-Hwang 대한전자공학회 2006 電子工學會論文誌-TC (Telecommunications) Vol.43 No.9

본 논문에서는 지능형 차량을 위한 차량네트워크를 IEEE 802.11b 무선 랜을 사용하여 구현하였을 때 간섭신호와 차량에서 발생하는 노이즈에 의한 영향을 확인하고 시스템의 안정성 여부를 판단한다. 무선 랜의 AP와 ME간의 통신을 지능형 차량의 차량 네트워크의 중앙 제어기와 센서, ECU, 구동계 장치 간의 통신이라고 가정하였을 때 다른 차량에서 사용하는 무선 차량 네트워크의 신호가 간섭으로 작용할 수 있다. 또한 차량 내부에서 발생하는 자동차 노이즈 또한 무선 차량 네트워크 시스템에 영향을 줄 수 있다. 본 연구에서는 외부 차량에서 송신된 신호가 다른 차량에게 간섭으로 작용하였을 패 간섭 수신신호의 세기에 따른 BER(Bit Error Rate)를 확인하였고 차량 내부에서 발생하는 차량 노이즈의 종류를 항상 영향을 주는 White type과 특정 시간에만 영향을 미치는 Spark type 노이즈로 구분하여 시스템에 주는 BER 영향을 확인하였다. 이를 통해 지능형 차량을 구성하기 위한 무선 차량 네트워크를 IEEE 802.11b 무선 랜으로 구현하였을 때 시스템의 안정성을 시뮬레이션을 통하여 확인하였다. In this paper, we analyze the performance of IEEE 802.11b WLAN communication between access point(AP) and mobile equipment(ME) in 2.4 GHz band with noise and interference factors. WLAN communication at in-vehicle environment is assumed as the communication between main vehicle controller and electronic device such as sensor, ECU (Electrical Control Unit) in vehicle on telematics field for implementing wireless vehicle control system. Received interference level from other system's mobile equipment in the same band and automobile noise from each part of vehicle can be the main factors that can cause increasing error rate of control signal. With these (actors, we focus on the Eb/No the BER performance of WLAN for analyzing the characteristic of interference factors by the measured bit error rate.

ZnO와 CuO 첨가에 따른 NKN-LST 세라믹스의 압전 특성

이승환,이성갑,이영희,Lee, Seung-Hwan,Lee, Sung-Gap,Lee, Young-Hie 한국전기전자재료학회 2011 전기전자재료학회논문지 Vol.24 No.8

Additions (ZnO, CuO) doped $0.98(Na_{0.5}K_{0.5})NbO_3-0.02Li(Sb_{0.17}Ta_{0.83})O_3$ (0.98NKN-0.02LST-x) lead free piezoelectric ceramics have been fabricated by ordinary sintering technique. The effects of additions doping on the dielectric, piezoelectric, and ferroelectric properties of the ceramics were mainly investigated. X-ray diffraction of the sample appeared orthorhombic phase. The specimen doped with additions exhibits enhanced electrical properties ($d_{33}$= 153 pC/N). These results indicate that the 0.98NKN-0.02LST-x ceramics is a promising candidate for lead-free piezoelectric ceramics for applications such as piezoelectric actuators, harmonic oscillator and so on.

CuO와 ZnO 첨가에 따른 NKN-BZT 세라믹스의 압전 특성

이승환,백상돈,이동현,이성갑,이영희,Lee, Seung-Hwan,Baek, Sang-Don,Lee, Dong-Hyun,Lee, Sung-Gap,Lee, Young-Hie 한국전기전자재료학회 2011 전기전자재료학회논문지 Vol.24 No.8

The lead-free $0.98(Na_{0.5},K_{0.5})NbO_3-0.02Ba(Zr_{0.52},Ti_{0.48})O_3$-(hereafter NKN-BZT) CuO, ZnO-doped ceramics were prepared using a conventional mixed oxide method. NKN-BZT ceramics doped CuO, ZnO have superior structural and electrical properties than pure NKN-BZT ceramics. For the NKN-BZT-ZnO ceramics sintered at $1,120^{\circ}C$, piezoelectric constant ($d_{33}$) of sample showed the optimum values of 172 pC/N. The $0.98(Na_{0.5},K_{0.5})NbO_3-0.02Ba(Zr_{0.52},Ti_{0.48})O_3$-ZnO ceramics are a promising candidate for lead-free piezoelectric materials.

재생미분말의 유해성 분석 및 재생미분말을 혼입한 콘크리트의 특성

이승환,최익창,한상국,Lee, Seung-Hwan,Choi, Ik-Chang,Han, Sang-Kuk 해양환경안전학회 2008 해양환경안전학회지 Vol.14 No.4

The disposal of constructive waste is emerging as a national and social issue and the recycled powder generated by the production of reproductive aggregate is all being abolished or buried Analysis on the harmful effect of recycled powder indicated that because it contained massive cytotoxicity, it could derive secondary pollution to soil and subterranean water. This study set on an idea that one way to recycle recycled powder was to use it as a compound of concrete. In order to study that prospect, recycled powder, instead of cement, was mixed and a comparative analysis was conducted on the mechanical properties and workability. From experimental results, it was judged that application of recycled powder of cement replacement ratio below 20% was available with chemical admixtures. Also application of recycled powder was available to high strength concrete. 건설폐기물의 처리는 국가 사회적 문제로 제기되고 있으며 순환골재의 생산과정에서 발생하는 미분말은 전량 폐기 매립되고 있다. 미분말의 유해성을 분석한 결과 세포독성을 함유하고 있어 토양 및 지하수오염 등 2차 오염을 초래할 수 있다. 본 연구에서는 미분말을 재활용하기 위한 방법으로 콘크리트의 혼화재로 활용하고자 시멘트 대신 미분말을 혼입한 콘크리트의 역학적 특성과 작업성을 비교 분석하였다. 콘크리트의 실험 결과에서, 혼화제를 적절히 사용하면 미분말을 시멘트 대신 20% 이하 치환한 경우 콘크리트에 적용 가능할 것으로 판단된다. 또한 고강도 콘크리트에서도 적용할 수 있다.

NKN-(1-x)BNT-xBT 세라믹스의 압전 및 유전특성

이승환,남성필,이성갑,이영희,Lee, Seung-Hwan,Nam, Sung-Pill,Lee, Sung-Gap,Lee, Young-Hie 한국전기전자재료학회 2010 전기전자재료학회논문지 Vol.23 No.10

In this study, piezoelectric and dielectric properties of the $(Na_{0.5}K_{0.5})NbO_3-(1-x)(Bi_{0.5}Na_{0.5})TiO_3-xBaTiO_3$ [NKN-(1-x)BNT-xBT] ceramics were investigated. The lead-free NKN-(1-x)BNT-xBT ceramics were fabricated by a conventional mixed oxide method. The results indicate that the addition of $BaTiO_3$ significantly influences the sintering, microstructure, phase transition and electrical properties of NKN-BNT ceramics. A gradual change in the piezoelectric and dielectric properties was observed with the increase of BT contents. The dielectric constant, piezoelectric constant ($d_{33}$) and electromechanical coupling factor ($k_p$) increased at the morphotropic phase boundary (MPB). The $d_{33}$=184 pC/N, $k_p$=0.38, dielectric constant=1455 with dielectric loss value of less than 1% were obtained for the NKN-0.95BNT-0.05BT ceramics sintered at $1150^{\circ}C$ for 2h. These results demonstrate that the NKN-(1-x)BNT-xBT ceramics is an attractive candidate for lead-free piezoelectric materials.

한우에 있어서 유전체 육종가 추정

이승환,김형철,임다정,당창권,조용민,김시동,이학교,이준헌,양보석,오성종,홍성구,장원경,Lee, Seung Hwan,Kim, Heong Cheul,Lim, Dajeong,Dang, Chang Gwan,Cho, Yong Min,Kim, Si Dong,Lee, Hak Kyo,Lee, Jun Heon,Yang, Boh Suk,Oh, Sung Jong,Hong, S Institute of Agricultural Science 2012 Korean Journal of Agricultural Science Vol.39 No.3

Genomic breeding value (GEBV) has recently become available in the beef cattle industry. Genomic selection methods are exceptionally valuable for selecting traits, such as marbling, that are difficult to measure until later in life. One method to utilize information from sparse marker panels is the Bayesian model selection method with RJMCMC. The accuracy of prediction varies between a multiple SNP model with RJMCMC (0.47 to 0.73) and a least squares method (0.11 to 0.41) when using SNP information, while the accuracy of prediction increases in the multiple SNP (0.56 to 0.90) and least square methods (0.21 to 0.63) when including a polygenic effect. In the multiple SNP model with RJMCMC model selection method, the accuracy ($r^2$) of GEBV for marbling predicted based only on SNP effects was 0.47, while the $r^2$ of GEBV predicted by SNP plus polygenic effect was 0.56. The accuracies of GEBV predicted using only SNP information were 0.62, 0.68 and 0.73 for CWT, EMA and BF, respectively. However, when polygenic effects were included, the accuracies of GEBV were increased to 0.89, 0.90 and 0.89 for CWT, EMA and BF, respectively. Our data demonstrate that SNP information alone is missing genetic variation information that contributes to phenotypes for carcass traits, and that polygenic effects compensate genetic variation that whole genome SNP data do not explain. Overall, the multiple SNP model with the RJMCMC model selection method provides a better prediction of GEBV than does the least squares method (single marker regression).

알루미늄 하부층이 탄소나노튜브의 성장 및 전계방출 특성에 미치는 영향

이승환,곽정춘,이한성,이내성,Lee, Seung-Hwan,Goak, Jeung-Choon,Lee, Han-Sung,Lee, Nae-Sung 한국전기전자재료학회 2008 전기전자재료학회논문지 Vol.21 No.2

We studied the effect of an Al underlayer on the growth of carbon nanotubes (CNTs) and their field emission characteristics, First of all, CNTs were grown on the Invar catalyst layers with different thickness of 1 to 10 nm, showing that the CNT length was saturated for the catalyst 5 nm or thicker. The CNTs grown on the 5-nm-thick catalyst were ${\sim}10{\mu}m$ long and ${\sim}30nm$ in diameter. Second, an Al underlayer was applied between the catalyst layer and the Ti diffusion barrier to reduce the diameters of CNTs for better field emission properties by forming spherical Al oxide particles on which smaller catalyst nanoparticles would occur. The optimal thickness of an Al underlayer underneath the 5-nm-thick catalyst was ${\sim}15nm$, producing the CNTs with the length of ${\sim}15{\mu}m$ and the diameter of ${\sim}15nm$. The field emission measurements, following the tape activation, showed that the thinner and longer CNTs gave rise to better field emission performance with the lower turn-on and threshold electric fields.

비납계 0.98 (Na_0.44K_0.52)Nb_0.84O₃-0.02Li_0.04 (Sb_0.06Ta_0.1)O₃-0.5 mol%CuO 세라믹스의 전기적, 구조적 특성

이승환,남성필,이성갑,이영희,Lee, Seung-Hwan,Nam, Sung-Pill,Lee, Sung-Gap,Lee, Young-Hie 한국전기전자재료학회 2011 전기전자재료학회논문지 Vol.24 No.2

The 0.98 ($Na_{0.44}K_{0.52})Nb_{0.84}O_3-0.02Li_{0.04}$ ($Sb_{0.06}Ta_{0.1})O_3-0.5$ mol%CuO ceramics have been fabircated by ordinary sintering technique and the effect of various calcination method on the electrical propertis and microstructure have been studied. It was observed that the various calcination method influenced the elelctrical properties and structural properties of the 0.98NKN-0.02LST-0.5 mol%CuO ceramics with the optimum piezoelectric constant ($d_{33}$) and electromechanical coupling factor ($k_p$) at room temperature of about $155{\rho}C/N$ and 0.349, respectively, from 0.98NKN-0.02LST-0.5 mol%CuO ceramics sample. The curie temperature ($T_c$) of this ceramic was found at $440^{\circ}C$. The 0.98NKN-0.02LST-0.5 mol%CuO ceramics are a promising lead-free piezoelectric ceramics.

피하 근막 혈관경을 사용한 외측 과상부 피판술

이승환,정문상,백구현,이영호,공현식,이상기,김지영,박종현,Rhee, Seung-Hwan,Chung, Moon-Sang,Baek, Goo-Hyun,Lee, Young-Ho,Gong, Hyun-Sik,Lee, Sang-Ki,Kim, Ji-Yeong,Park, Jong-Hyun 대한미세수술학회 2007 Archives of reconstructive microsurgery Vol.16 No.2

Soft-tissue reconstruction of the foot and ankle has long been a challenge for reconstructive surgeons. Limitations in the available local tissue and donor-site morbidity restrict the options. In an effort to solve these difficult problems, the authors have begun to use a subcutaneous fascial pedicled lateral supramalleolar flap. This report presents the authors' experience with five patients treated with this flap. The patients’ ages ranged from 26 to 72 years; four of the patients were male and one was female. The cause of the soft-tissue defects involved acute trauma and malignant melanom. All flaps survived and provided satisfactory coverage of the defect. Compared with the classic lateral supramalleolar flap, when the perforating branch is interrupted in its course, it is possible to elevate this subcutaneous fascial pedicled flap. The distally based flap with a compound pedicle which is continuous with a vascular axis and a band of subcutaneous fascial pedicle has long pedicle. This procedure is valuable for remote defect of the foot. It is believed that this flap is versatile and effective and is a good addition to the available techniques used by reconstructive surgeons for coverage of the foot and ankle.