http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
박영근,주현준,김천영,정나현,이준규,이인원,Park, Young-Keun,Ju, Hyun-Jun,Kim, Cheon-Young,Jung, Na-Hyeon,Lee, Jun-Kyu,Lee, In-Won 한국시뮬레이션학회 2012 한국시뮬레이션학회 논문지 Vol.21 No.4
본 논문에서는 가상현실 기술을 기반으로 정비성 모의 시스템에 대한 개발 기술 및 적용 사례에 대해 기술하였다. 정비성 모의를 위해 가상현실 장비를 기반으로 한 몰입형 시뮬레이터가 개발되었으며, 상용 소프트웨어인 DELMIA를 활용한 조립 시뮬레이션이 공대지 유도무기를 대상으로 수행되었다. 개발된 시스템은 설계 단계에서 군수지원 요소 개발에 다양하게 활용이 가능하였으며 효용성을 확인할 수 있었다. This paper describes the development and applications of maintainability simulation system based on virtual reality technology. The immersive type maintainability simulator using virtual reality is developed and assembly simulation using DELMIA software is conducted for an air-to-ground munition as an example. The simulation processes and result validate the feasibility and effectiveness of maintainability simulation system for logistic element development.
3차원 도로면 수치 모델링을 위한 최적 필터링 방법의 적용
박영근(Park, Young Keun),서용철(Suh, Young cheol) 한국지적정보학회 2012 한국지적정보학회지 Vol.14 No.2
본 연구는 3차원 공간정보 구축에 사용되는 도로면 수치표고모델 필터링에 관한 것으로 현재 3차원 공간정보 구축을 위한 수치표고모델 자료는 항공기로부터 획득된 LiDAR(Light Detection And Ranging) 데이터를 이용하여 1m 격자 간격의 수치표고모델을 제작하여 사용하고 있다. 일반적인 경우 LiDAR 데이터 높이 값의 정확도는 입체항공사진을 이용하여 제작하는 수치지형도보다 정확하여 수치표고모델 뿐만 아니라 수치지형도에서 획득하기 어려운 수치표면모델(DSM : Digital Surface Model) 구축에도 넓게 활용되고 있다. 그러나 LiDAR 데이터에서 정확한 높이 값을 확보할 수 있다는 장점에도 불구하고 3차원 공간정보 구축시 도로면을 3차원 형태로 시각화 할 경우에는 LiDAR 자료 처리의 특성상 일부 도로면이 현실세계와는 다르게 도로면 상에서 심한 요철 현상이 존재하여 3차원 공간정보의 특성인 현실성과 차이를 나타낸다. 이러한 문제를 수정하기 위해서는 도로면의 수치표고모델을 수정해야 하나 기존의 방식으로는 소요시간이 많고 전체 데이터에서도 오류 사항을 수정하기가 어렵다. 따라서 본 논문에서는 LiDAR 데이터를 이용하여 획득된 도로면의 수치표고모델정보를 Bilateral 필터링 기법을 적용하여 3차원 공간정보로 가시화하였을 경우 높이 값에 대한 정확도를 확보하면서 도로면의 요철 현상을 감소시킬 수 있어 현실에 가깝게 평탄한 도로면을 구현할 수 있는 필터링 기법을 적용하여 구현하였다. This study is about digital elevation model filtering method over road surface to build 3D(three-dimensional) spatial information. Currently, Digital Elevation Model, acquired from LiDAR(Light Detection And Ranging) data as 1m post spacing, is in use. Despite the advantage that LiDAR data obtains the accurate height values , there is uneven surface phenomenon over some of road surfaces, different from actual road condition, due to the characteristics of LiDAR data processing in case of 3D visualization of road surface. In this Study, through Bilateral mesh filtering method with digital elevation model obtained from LiDAR data, uneven surface phenomenon is reduced without losing its accuracy so that its result is as like near-actual road surface.
서브 미터급 위성영상을 이용한 1:2,500 수치지형도 제작에 관한 연구
박영근(Park, Young Keun),서용철(Suh, Young Cheol) 한국지적정보학회 2013 한국지적정보학회지 Vol.15 No.2
1990년대 후반 1m 공간해상도의 위성영상 등장으로 인하여 항공사진 촬영이 불가능한 접경지역에 대한 1:5,000 대축척 수치지형도 제작이 활발하게 진행 되고 있다. 그러나 군(郡)단위 지역의 도시 시설물 관리, U-City, 3차원 공간정보 구축을 위한 1:2,500 수준의 대축척 지도 제작에 대한 수요 요구는 1m급 위성영상으로는 위치정확도와 공간묘사 등에서 한계가 존재하기 때문에 활용하기가 어렵다. 이에 본 연구는 공간해상도 0.5m급 위성영상인 Geoeye-1 위성영상을 이용하여 휴전선에 인접하여 항공사진 촬영이 불가능한 연천군청 일대에 대하여 1:2,500 수치지형도를 실험 제작하였다. 서브미터급 위성영상을 이용하여 제작한 결과 평면 및 표고 위치 정확도는 각각 0.91m와 0.52m로 나타났다. 또한 공간해상도로 인한 지형·지물 묘사 부분에서는 대상지역에서 80% 수준으로 묘사가 가능한 것으로 나타났다. 따라서 접경지역에 위치한 군(郡)단위에서 도시시설물 관리 등을 위한 GIS 정보 구축을 위해서 서브미터급 위성영상을 활용이 가능할 것으로 판단된다. Due to 1m spatial resolution of satellite images, large-scale digital topographic maps at a primary scale of 1:5,000 have been produced for inaccessible areas from aerial photographs since the late 1990s. However, the image has not been sufficient for large-scale topographic maps at a scale of 1:2,500 for urban facility management, U-City, and 3-dimensional geographic information in local military units due to the limitation in the positional accuracy and feature identification. In this study, GeoEye-1 satellite image at 0.5m spatial resolution was used in mapping at a scale of 1:2,500 for the area of Yeoncheon County Office near the Korean Demilitarized Zone(DMZ) where traditional aerial photography is not possible. The plane and elevation accuracy of the sub-meter satellite images were 0.91m and 0.52m, respectively, and it could deliver an accuracy of 80% when depicting terrain features in their true planimetric position. Therefore, the sub-meter satellite images can be used in local military units near the DMZ for the Geographic Information System(GIS) mapping for urban facilities management.
외국인 학습자를 위한 문맥 기반 실시간 국어 문장 교정
박영근(Young-Keun Park),김재민(Jae-Min Kim),이성동(Seong-Dong Lee),이현아(Hyun Ah Lee) 한국정보과학회 2017 정보과학회논문지 Vol.44 No.10
외국인 유학생과 국내 체류 외국인 등 한국어를 학습하고자 하는 외국인이 지속적으로 증가함에 따라 외국인 한국어 학습자의 교육에 대한 관심이 높아지고 있다. 기존 맞춤법 검사기는 한국인의 사용에 중점을 두고 있어 외국인 한국어 학습자가 사용하기에는 다소 부적절하다. 본 논문에서는 한국어의 문맥 특성과 외국인의 작문 특성을 반영한 한국어 교정 방식을 제안한다. 제안하는 방식에서는 국어 문서에서 자주 사용되는 표현을 추천 교정으로 제시하기 위해 말뭉치를 활용한다. 말뭉치에서 추출된 어절 바이그램에 대한 음절 역색인을 사용하여 입력된 작문에 대한 교정 후보 집합을 얻고, 외국인의 작문 특성을 반영하는 편집거리 계산 방법을 사용하여 순위화된 추천 교정을 제시한다. 구현된 시스템에서는 사용성 향상을 위해 키보드 후킹에 기반한 사용자인터페이스를 제공하여 다른 응용프로그램에서의 입력과 동시에 문장 교정 결과를 얻을 수 있다. 외국인의 작문 환경에 대한 평가에서는 타 시스템에 비해 검출률을 약 45% 향상시켜, 제안된 시스템을 사용하는 경우 외국인 사용자가 스스로 작문 오류를 판단하고 수정할 수 있어 한국어 학습에 많은 도움이 될 것으로 기대된다. Educating foreigners in Korean language is attracting increasing attention with the growing number of foreigners who want to learn Korean or want to reside in Korea. Existing spell checkers mostly focus on native Korean speakers, so they are inappropriate for foreigners. In this paper, we propose a correction method for the Korean language that reflects the contextual characteristics of Korean and writing characteristics of foreigners. Our method can extract frequently used expressions by Koreans by constructing syllable reverse-index for eojeol bi-gram extracted from corpus as correction candidates, and generate ranked Korean corrections for foreigners with upgraded edit distance calculation. Our system provides a user interface based on keyboard hooking, so a user can easily use the correction system along with other applications. Our system improves the detection rate for foreign language users by about 45% compared to other systems in foreign language writing environments. This will help foreign users to judge and correct their own writing errors.