식품 기준·규격의 합리적 관리 ·운영에 관한 연구(Ⅰ) : 두부,식용유지, 전분의 분말상 원료에 관하여 Powdered marerials of Tofu, Edible oil, Starch

김희연,홍진환,박혜경,한상배,박종석,이은주,이정성,송경희,최은희,최영준,소경아,성영제,이주엽 식품의약품안전청 2000 식품의약품안전청 연보 Vol.4 No.-

본 연구는 분말상 원료(전분, 대두분)의 저장유통시 품질변화를 건전성과 안전성 측면에서 검토하여 식품의 기준 ·규격 설정f.」 합지적으로 반영하고자 하였다. 전분과 패두분의 이물을 검사하고, 2종 대두분(중국산, 미국산)을 ?0일간 IS'c와 30t에 저장하면서 성상, 수분, 산가, 과산화물가, 지방산 조성,아플라톡신 BB의 생성여부를 분석하였다. 중국산 대두분 30'』 저장군에서 50일 이후 곰팡이가 발생한 것 이외에 모든 시료에서 양호한 성상을 나타내었고, 전분과 대두닥 모든 시료에서 이물은 검출되지 않았다. 산가는 중국산과 미국산 시료간에 편차를 보여 증국산 30"C, 50일 저장시료에서 약 10배끙도 증가하였고, 과산화물가는 저장 90일후 15'E 저장군은 약 2.3배, 30'c 저장군은 3배정도 증가하였다. 대두분의 주요 지방산은 linoleic acidf18. 2), oleic acid(18 : 1), palmitic acid(16 : 0)이었으며, 3개월 저장에 따른 지방산 함량의 변화는 미미하였다. 아플라톡신 B₁은 모든 시료에서 검출되지 않았다. The objective of this study was to investigate auality changes of type raw materials(starch, soy flour) during various storage conditions. Starchflour(source of China, U.S.A) were slfred under two temperature(15'C, 30'c) forSensory evaluation, (o.reign material test, moisture content, acid value, peroxide ualue,composition, aflatorin Bi were analyzed. China soy flour(stor·ed 30'f) was contaminated by fungj on 50 days. Except for soy flour contardnated by fungi, sensory characteristics were not changed and foreign mater;als were notdetected. Acid value of China soy flour(stored at 30'C, 90 days) was about 10 times higherlevel before storage and acid value was more influenced by source(China, USA). Peroxide valuewas in proportion with the storage period slightly. The major fatty acid of soy flour waslinoleic acid(18 . 2), an(3 the change of fatty acid composition was not observed. Aflatoxlrl Blwas not detected.

치과 교정학 분야에서 COMPUTER 이용에 관하여

경희문,권오원,배세복 대한치과교정학회 1989 대한치과교정학회지 Vol.19 No.3

About twenty years ago the computer was introduced into orthodontic, but not in clinics because it was inconvenient in cost, size, capacity and operation. But recent advances in the technology of electronics have produced a personal computer which is suitable for use in clinics. We have developed useful program for cephalometric Ax, model analysis and patient management. The computer program greatly aided in saving time & effort and performed well in the management & searching for patient data. But further studies about tree dimensional analysis, S.T.O. and derivation of automatic treatment planning from analysis are needed.

지렁이 분변토로부터 황화수소 분해 균주의 분리 및 특성

배무,박상진,류희욱,조경숙,이은영 이화여자대학교 환경문제연구소 1997 이화환경연구 Vol.1 No.-

탈취제로 이용되고 있는 지렁이 분변토로 부터 황화수소를 제거하는 황산화 세균 CP-5를 분리하였다. 이 균주는 운동성이 없고 Gram 음성인 단간균 이었으며, cytochrome oxidase와 catalase test에 양성 반응을 보였다. CP-5 균주는 환원형 황합물을 기질로 하는 배지에서 독립영양적인 생장이 가능하였다. 이 균주는 thiosulfate 에서 tetrathionate를 중간생성물로 하여 최종적으로 sulfate로 산화하고, elemental sulfur를 일단 thiosulfate로 산화한 후, sulfate까지 재산화하는 것으로 사료되었다. 독립영양 배지에 yeast extract 를 첨가하면 균의 생장이 촉진되었다. CP-5 균주 현탁액에 H₂S를 2vvm의 유속으로 주입하면 140ppm까지는 거의 완전하게 제거 가능하였다. 본 연구결과로부터 CP-5 균주는 분변토에서 황화수소를 제거하는 대표적인 탈취균주이며, 황화수소 제거를 위한 생물학적 탈취 공정에 활용 가능하다는 것을 알 수 있었다. A new sulfur-oxidizing bacterium which was capable of degrading hydrogen sulfide was isolated from earthworm casts using deodorant materials. The cell of isolate CP-5 was short rod, gram negative and non-motile, the activities of cytochrome oxidase and catalase were positive. The isolate could autotrophically grow in the basal mineral medium supplemented the reduced sulfur compounds such as thiosulfate and elemental sulfur. This bacterium could oxidize thiosulfate and elemental sulfur to sulfate, and the metabolic intermediates were considered as tetrathionate and thiosulfate, respectively. The removal of hydrogen sulfide by the isolate CP-5 was confirmed, and the CP-5 was regarded as one of microorganisms responsible for degradation of hydrogen sulfide in earthworm casts. The isolate CP-5 can be applied to biodeodorization systems for the improvement of removal efficiency of hydrogen sulfide.

백서 하악골의 기능적 전방위가 악관절 원판에 미치는 영향

배용철,경희문,장병천,성재현 대한치과교정학회 1994 대한치과교정학회지 Vol.24 No.4

This study was conducted to examine the changes in the shape of the Sprague-Dawley rats' articular disk following postural hyperpropulsion by observing their articular specimens through light and electronic microscopes after following 2-week and 4-week postural hyperpropulsion from their four weeks of age. The findings of this study are summarized as follow. It was shown that as compared with the control group, the experimental group indicated a significant increase in thickness of the 2-week groups' anterior and posterior portion of the articular disc. The experimental group showed statistically more significant increase in thickness of the 4-week groups' anterior portion of the articular disc than the control group. Light micrograph showed that the experimental group had more fibroblast in the anterior portion of the 2-week and 4-week groups than the comparing group. The 2-week groups showed in the findings through the electronic microscope that there were found the well developed and dilated RER which see-ms to actively synthesize the extracellular matrix including collagen, the cells with the well developed RER without distention which seems to actively synthesize the intracellular microfilaments due to the well developed free ribosome, and the typical chondroid cells. In addition, there was more fibroblast cell with the distended and well developed RER in the anterior area of the experimental group than that of the control group while fibroblast with the well developed RER and free ribosome was quite abundat. Based on the above result of this study, it was shown that the functional hyperpropulsion of the mandible causes the changes in the nature of the mechanical load to the certain portion of the articular disk. As a result, it seems that there may be occurred some changes in morphology of the disc by adaptation or confrontation with these changes at the cellular level.

(AgCu)_0.43-Au_0.54Pd_0.03 합금의 시효경화 특성

배동화,설효정,이희경,김형일,김교한 대한치과기재학회 2001 대한치과재료학회지 Vol.28 No.3

팔라디움이 함유된, 시효경화성 치과주조용 고금합금의 연구를 위한 기초자료를 얻기 위하여, 4원계 □ 합금의 등온시효경화 거동과 상변태를 경도 시험, X선회절 실험으로 조사하여, 다음과 같은 결과를 얻었다. 본 합금을 250~350℃에서 등온시효처리하면, 면심정방구조를 갖는 준안정상 AuCu Ⅰ'형 규칙상이 면심정방구조를 갖는 AuCu Ⅰ형 규칙상과 면심입방구조를 갖는 Ag-rich a₁상이 생성되기 전에 생성되었다. 본 합금은 시효처리 온도에 따라 다른 시효경화 거동을 보여주었다. 350℃에서 시효처리를 하면, 경도는 시효 초기에 상승하지 않았고, 최고 경도에 도달하여 유지되고나서 시효시간을 연장함에 따라 경도가 급격히 저하하였다. 250℃에서 시효처리를 하면, 경도는 시효 초기부터 뚜렷히 상승하기 시작하였다. 그 후, 약간의 경도 하강을 보이고나서 경도는 다시 서서히 상승을 지속하였다. 350℃에서 경화는 준안정상 AuCu Ⅰ'형 규칙상의 균일핵생성에 기인하였다. 낮은 시효온도에서의 초기 경화는 다른 상변태에 의해 초래되었고, 이어서 일어나는 경화는 준안정상 AuCu Ⅰ'형 규칙상의 생성에 기인하였다. 시효시간을 연장함에 따라 생기는 과시효 연화는 평형상 AuCu Ⅰ형 규칙상의 생성에 기인하는 것으로 생각된다.

열공형과 비열공형 피질하 혈관성 치매에서 위험인자의 차이에 관한 비교 연구

배희준,정지향,유경호,나덕렬,김상윤,최경규,양동원,손의주,이상도,김재우,박경원,김응규,이재홍,박미영,한일우,함동석,최문성,하충건,최성혜,이애영,이병철,한설희 대한치매학회 2003 Dementia and Neurocognitive Disorders Vol.2 No.2

Backgrounds and Objectives: Vascular dementia is a group of dementing disoders arising from various stroke syndrome. Among these. subcortical ischemic vascular dementia (SIVD) is regarded as a relatively distinct clinical entity. However, MRI patterns of SIVD are not homogenous. In some patients, lacunes are dominant, and in others, subcortical white matter changes are. This study was designed to compare risk factor profiles between SIVD with and without multiple lacunes. Methods: We divided 47 subjects (22 males, mean age. 68 years) recruited from VADAPET (Multicenter Trial For Evaluation Of The Changes In the PET Images Of Subcortical Vascular Dementia Patient) study into two groups one with more than 5 lacunes in deep gray matter (lacune group) and the other with 5 or less(non-lacune group) Clinical characteristics and laboratory findings of two groups were compared. Results: Nineteen of 47 patients (40%) belonged to the lacune group. The lacune and non-lacune groups d d not differ in the following variables: age, hypertension, diabetes mellitus, hyperlipidemia heart disease, history of stroke or TIA, history of trauma or major surgery, family history of hypertension stroke, or dementia, age at diagnosis of dementia, body mass index, white blood cell count, ESR, CRP, fibrinogen, hemoglobin A1C, total cholesterol. LDL cholesterol creatinine, proteinuria, glucosuria, and microhematuria. However, male sex, smoking alcohol. hemoglobin, and HDL cholesterol were possibly associated more with lacune group SIVD than with non-lacune group (p<0 1) Multivariate analyses revealed that smoking, hemoglobin, and HDL cholesterol were independent predictors of SIVD with multiple lacunes Conclusion: Our study suggests that SIVD with multiple lacunes may be significantly different in smoking habits hemoglobin, and HDL cholesterol from SIVD without multiple lacunes.

유전자 알고리즘을 이용한 엑시머 레이저가공의 최적조건 선정

배창현,최경현,이석희 한국공작기계학회 2002 한국생산제조학회지 Vol.11 No.6

A new 3D micromachining method, called Hole Area Modulation(HAM), has been introduced to enhance the current micromachining technology. In this method, information on the depth of machining is converted to the sizes of small holes in the mask. The machining is carried out with a simple 2D movement of the workpiece. This method can be applied for machining various kinds of microcavities in various materials. In this paper, a mathematical model for excimer laser micromachining based on HAM and also determination of optimal laser ablation conditions(width, hole radius, step size, path, etc.) is performed by Genetic Algorithm(GA).

사염화탄소의 친환경적 처리 기술

배종욱,이재성,이경희,김영걸 전남대학교 촉매연구소 2001 觸媒硏究 論文集 Vol.22 No.-

휘발성 유기화합물의 일종인 사염화탄소는 성층권에서 클로린 라디칼에 의한 오존층 파괴에 촉매작용을 하는 것으로 알려져 있다. 일반적인 사염화탄소의 처리 기술은 크게 다음의 세가지 기술로서, (1)직접 열분해 방법, (2) 촉매를 이용한 열분해 방법, (3)촉매를 이용한 탈염소수소화 반응이 있으며, hydrodechlorination반응은 수소화 반응에 보편적으로 사용되는 백금계 촉매를 사용하여 100~200oC의 낮은 반응 온도에서 이루어지므로 에너지 소비가 적으며 2차 오염원이 발생하지 않는 장점이 있다.

유한요소법을 이용한 기둥형 로드셀의 비선형성 평가

배준우,황재근,박경흠,양희준,이춘열 嶺南大學校 工業技術硏究所 2004 工業技術硏究所論文集 Vol.32 No.1

Recently, force measurement systems are commonly used in many industrial fields and the precision of the measurement system is getting more important as the industry needs more precise tools and instruments to make high quality products. However, a high precision force measurement system is hard to make unless we know precisely the causes, quality and quantity of measurement errors in advance. In this work, many possible mechanical causes of measurement errors are reviewed including ratio of length to diameter of sensing part, radius of contact area, radius of bearing part, ratio of material properties and change of boundary conditions. Also, the measurement errors are analyzed by nonlinear finite element method and the nonlinear behavior of the errors are investigated. The results can be used to design force measurement systems and expected to be very useful especially for compact type load cells.

직렬형 PWM 인버터를 이용한 동적전압보상기에 관한 연구

배정환,한병문,한경희,김희중 명지대학교 대학원 1997 대학원논문집 Vol.1 No.-

This paper presents a novel compensation method for the voltage sag problem for a critical load. This method is able to restore the supply voltage to the original magnitude and shape by injecting the vector diffence between the desired voltage and the actual voltage. The proposed system consists of a dc energy storage device, dc-ac converter, and a coupling transformer to inject the output of the inverter in series with the line. It can make up for the weakness of UPS and SPS. The operation of this system is verified by the computer simulation with EMTP code and experimental work with a scaled model. The advantages of this new system over the existing system are the fast reaction time and the low compensation energy in operation.