Mo/SiO₂/Si(100)기판 위에 MOCVD법으로 성장시킨 AIN박막이용 GHz대역의 FBAR제작에 관한 연구

양충모,김성권,차재상,박구만,Yang, Chung-Mo,Kim, Seong-Kweon,Cha, Jae-Sang,Park, Ku-Man 한국조명전기설비학회 2006 조명·전기설비학회논문지 Vol.20 No.4

본 논문에서는 $Mo/SiO_2/Si(100)$ 기판 위에 MOCVD(Metal-Organic-Chemical-Vapor Deposition)법을 이용하여 C축 방향으로 성장시킨 AIN(Aluminum Nitride) 박막을 이용하여 GHz대역 무선 통신에서 사용할 수 있는 FBAR(Film-Bulk-Acoustic Resonator)을 제작하였다. 제작된 공진부의 공진주파수와 반공진주파수는 각각 3.189[GHz]와 3.224[GHz]으로 측정되었으며, Q값(Quality Factor)과 유효한 전기기계 결합계수(${k_{eff}}^2$)는 각각 24.7과 2.65[%]로 평가되었다. AIN의 증착(Deposition) 조건은 $950[^{\circ}C]$의 기판표면(Substrate) 온도, 20Torr의 압력, 25000의 N/Al의 V/III비로 증착하였다. $4{\times}10^{-5}[\Omega{cm}]$의 Mo 하부전극 고유저항과 $Mo/SiO_2/Si(100)$ 기판 위에 AIN(0002) FWHM(Full-Width at Half-Maximum) 4를 갖는 C축 방향성의 AIN 박막을 성공적으로 성장시켰다. 따라서 증착된 AIN박막의 FWHM값은 GHz대역 무선 통신용 RF(Radio Frequency) 밴드 패스 필터 설계에 유용하게 사용될 것이다. In this paper, it is reported that film-bulk-acoustic resonator with high c-axis oriented AIN film on $Mo/SiO_2/Si(100)$ using metal-organic-chemical-vapor deposition was fabricated. The resonant frequency and anti-resonant frequency of the fabricated resonator were observed with 3.189[GHz] and 3.224[GHz], respectively. The quality factor and the effective electromechanical coupling coefficient(${k_{eff}}^2$) were measured with 24.7 and 2.65[%], respectively. The conditions of AIN deposition were substrate temperature of $950[^{\circ}C]$, pressure of 20Torr, and V-III ratio of 25000. A high c-axis oriented AIN film with $4{\times}10^{-5}[\Omega{cm}]$ resistivity of Mo bottom electrode and $4[^{\circ}]$ of AIN(0002) full-width at half-maximum(FWHM) on $Mo/SiO_2/Si(100)$ was grown successfully. The FWHM value of deposited AIN film is useful for the RF band pass filter specification for GHz-band wireless local area network.

Mo 화학기상증착에 있어서 불순물 농도에 미치는 증착조건의 영향

배상석,서성교,홍은식,김승모,조미정,한혜정,이두성,김세훈,민석홍 국립7개대학공동논문집간행위원회 2001 공업기술연구 Vol.1 No.-

The thermal decomposition process of Mo(CO)_6 on chemical vapor deposition was investigated by analyzing the effects of deposition temperature, pressure, and reaction gas on the phase change of deposited films. Mo_2C was deposited at or below 350℃ due to the incompleteness of thermal decomposition of Mo(CO)_6, but Mo films was successfully deposited at 400℃ or higher temperatures. The variation of deposition pressure did not change the dependence of decomposition process on deposition temperature. The activation energy of surface reaction was 5.8 ㎉/mole.

SHS 공정에 의해 제조된 Mo_xW_1-xSi₂ 발열체의 열화메커니즘

이동원,이상헌,김용남,이성철,구상모,오종민,Lee, Dong-Won,Lee, Sang-Hun,Kim, Yong-Nam,Lee, Sung-Chul,Koo, Sang-Mo,Oh, Jong-Min 한국전기전자재료학회 2017 전기전자재료학회논문지 Vol.30 No.10

The degradation mechanism of $Mo_xW_{1-x}Si_2$ ultrahigh-temperature heating elements fabricated by self-propagating high-temperature synthesiswas investigated. The $Mo_xW_{1-x}Si_2$ specimens (with and without post-annealing) were subjected to ADTs (accelerated degradation tests) at temperatures up to $1,700^{\circ}C$ at heating rates of 3, 4, 5, 7, and $14^{\circ}C/min$. The surface loads of all the specimen heaters were increased with the increase in the target temperature. For the $Mo_xW_{1-x}Si_2$ specimens without annealing, many pores and secondary-phase particles were observed in the microstructure; the surface load increased to $23.9W/cm^2$ at $1,700^{\circ}C$, while the bending strength drastically reduced to 242 MPa. In contrast, the $Mo_xW_{1-x}Si_2$ specimens after post-annealing retained $single-Mo_xW_{1-x}Si_2$ phases and showed superior durability after the ADT. Consequently, it is thought that the formation of microcracks and coarse secondary phases during the ADT are the main causes for the degraded performance of the $Mo_xW_{1-x}Si_2$ heating elements without post-annealing.

Effect of post annealing on the microstructure, mechanical properties, and failure of Mo_xW_1-xSi₂ heaters produced by self-propagating high-temperature synthesis

Cho, Myung-Yeon,Lee, Sung-Chul,Park, Chulhwan,Lee, Daeseok,Koo, Sang-Mo,Moon, Kyoung-Sook,Lee, Dong-Won,Oh, Jong-Min Elsevier 2019 INTERMETALLICS Vol.110 No.-

<P><B>Abstract</B></P> <P>High-performance tungsten molybdenum disilicide (Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si<SUB>2</SUB>) heating elements were prepared using a self-propagating high temperature synthesis process. The effect of post annealing on the degradation behavior of the alloy was experimentally investigated. Increasing the attrition milling time up to 20 min during powder preparation resulted in Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si<SUB>2</SUB> heaters with the highest density, which increased the fracture strength compared to samples with shorter attrition times. Such samples were annealed and evaluated as heating elements using accelerated degradation tests and failure analysis in order to compare their structural characteristics and flexural strength with as-fabricated samples. The annealed Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si<SUB>2</SUB> heater showed a relatively dense structure with few pores and no secondary phases, apart from a SiO<SUB>2</SUB> layer. This favorable structure prevented bubble formation, which can result in fracturing of the heater, as revealed by evaluation at high temperatures with various heating rates. The flexural strength of the annealed specimen was 2.5-times higher than that of the as-fabricated specimen, which was attributed to removal of secondary phases during annealing. Failure time and surface load analyses were used to investigate the fracture mechanism of the Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si<SUB>2</SUB> heaters in detail at 1790 °C by quantifying bubble formation and the presence of secondary phases.</P> <P><B>Highlights</B></P> <P> <UL> <LI> Self-propagating high temperature synthesis of Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si<SUB>2</SUB> heaters demonstrated. </LI> <LI> Post-annealed Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si<SUB>2</SUB> heaters were highly dense, with good flexural strength. </LI> <LI> Bubble formation (the main cause of fracture) suppressed at ultra-high temperature (above 1700 °C). </LI> <LI> Surface load, failure time, and bubble formation used to study fracture mechanisms. </LI> </UL> </P>

해남 모이산 천열수 금은광상의 지구화학적 특성

문동혁,고상모,이길재,Moon, Dong-Hyeok,Koh, Sang-Mo,Lee, Gill-Jae 대한자원환경지질학회 2010 자원환경지질 Vol.43 No.5

전남 해남군 모이산 금광상에서 지구화학적 특성에 대한 연구를 수행하기 위하여 모이산 지표 및 갱내, 대산 지표에서 채취한 총 140개 시료에 대한 지구화학분석결과를 상관분석, 요인분석 그리고 군집분석 등 다변수 통계처리 하였다. 상관분석 결과, 금의 함량이 100 ppb 미만인 비광화대와 100 ppb 이상인 광화대에서 동시에 금과 높은 상관관계를 가지는 원소는 Ag, Cu, Bi, Te 등이며, 이는 연구지역에서 수반되는 함금 은 광석광물들(엘렉트럼, 실바나이트, 칼라버라이트 및 스퉤자이트)과 기타광석광물들(황동석, 텔룰로비스무타이트 및 비스무시나이트)의 산출과 일치된 결과로 인지된다. Mo은 비광화대(0.269)에서 보다 광화대(0.615)에서 상대적으로 높은 상관계수를 가지므로 금광화작용에 의해 그 함량이 강하게 지배되고 있는 것으로 해석된다. Mn, Cs, Fe, Se 등은 비광화대에서는 금과 정의 상관관계를 가지지만 광화대에서는 음의 상관관계를 가지므로 금광화작용 시 모암으로부터 용탈되는 원소군으로 해석된다. Sb은 광화대에서 금과 높은 상관성을 보이지만 비광화대에서는 음의 상관관계를 가지므로 금광화작용 시 부화되는 원소로 지시될 수 있다. 요인분석결과, 비광화대에서 금의 함량에 영향을 받는 요인군에 속하는 원소는 Se, Ag, Cs, Te 등이며 이들은 연구지역 내 비광화대에서 금의 존재 여부를 알려줄 수 있는 원소로 해석될 수 있다. 반면 광화대에서는 Mo과 Te 등이 강하게 금광화작용의 여부를 지시해 주며, 금과 함께 수반되는 은광화작용의 여부를 지시해 줄 수 있는 원소는 Sb과 Cu 등으로 해석된다. 군집분석 결과 비광화대에서 Cd-Zn-Pb-S, Bi-Fe-Cu-Mn, Se-Te-Au-Cs-Ag, As-Sb-Ba 등이 유사한 거동을 보이는 원소군으로 나타나는 반면, 광화대에서는 Cd-Zn-Mn-Pb, Fe-S-Se, As-Bi-Cs, Ag-Sb-Cu, Au-Te-Mo 등이 유사한 거동을 보여주는 원소군으로 나타난다. 이상과 같은 지구화학분석 자료의 다변수 통계처리를 이용하여 금광화대와 비광화대의 산출광물의 거동 및 지구화학적 특성 차이의 비교가 가능하므로 추후 이러한 방법이 이와 유사한 유형의 광상탐사에 유용한 방법으로 적용될 수 있을 것으로 기대된다. Geochemical characteristics of the Moisan epithermal gold-silver deposit with total 140 samples in Haenam area, Jeollanamdo were studied by using multivariate statistical analysis (correlation analysis, factor analysis and cluster analysis). The correlation analysis reveals that Ag, Cu, Bi, Te are highly correlated with Au in the both non-mineralized and mineralized zone. It is resulted from the presence of Au-Ag bearing minerals (electrum, sylvanite, calaverite and stuezite) and non Au-Ag containing minerals (chalcopyrite, tellurobismuthite and bismuthinite). Mo shows relatively much higher correlation at the mineralized zone (0.615) than non-mineralized zone (0.269) which implies Mo content is strongly affected by Au-mineralization. While Mn, Cs, Fe, Se correlated with Au at the nonmineralized zone, they have negative correlation at the mineralized zone. Therefore, they seem to be eluviated elements from the host rock during gold mineralization. Sb is enriched during the gold mineralization showing high correlation at the mineralized zone and negative correlation at the non-mineralized zone. According to the factor analysis, Se, Ag, Cs, Te are the indicators of gold mineralization presence due to the strong affection of gold content in the non-mineralized zone. In the mineralized zone, on the other hand, Mo, Te and Sb, Cu are the indicators of gold and silver mineralization, respectively. While the cluster analysis reveals that Cd-Zn-Pb-S, Bi-Fe-Cu-Mn, Se-Te-Au-Cs-Ag, As-Sb-Ba are the similar behavior elements groups in the non-mineralized zone, Cd-Zn-Mn-Pb, Fe-S-Se, As-Bi-Cs, Ag-Sb-Cu, Au-Te-Mo are the similar behavior elements groups in the mineralized zone. Using multivariate statistical analysis as mentioned above makes it possible to compare the behavior of presented minerals and difference of geochemical characteristics between mineralized and non-mineralized zone. Therefore, it will be expected a useful tool on the similar type of mining exploration.

우리 나라 해사중재의 현황과 개선 방안

성재모,김성준 한국해운물류학회 2003 해운물류:이론과실천 Vol.- No.5

해운, 무역, 보험과 관련한 분쟁은 법원보다는 중재에 회부되는 경우가 일반적이다. 그러나 국내 해운선사들이 해운 분쟁을 대한상사중재원에 회부하는 건수는 갈수록 줄어들고 있고, 대부분은 런던해사 중재에 회부되고 있다. 이번 연구에서는 해운선사의 해사중재현황을 5개 선사를 중심으로 조사하였다. 조사결과 용선분쟁의 90% 이상이 런던해사중재에 회부되고 있고, 대한상사중재원에 회부되는 중재는 2.2%에 불과했다. 이는 해사 분쟁의 당사자가 국내 선사와 제3국 기업이 주류를 차지하고 있는 것이 가장 큰 원인인 것으로 파악된다. 그밖에 해운과 관련한 영국의 판례가 용선계약서 해석의 원칙이 되고 있는 것이 해운업계의 오랜 관행으로 자리잡고 있는 것도 주요한 원인으로 작용하였다. 해운과 관련한 계약은 대부분 국제간에 이루어지기 때문에 해상법이 발달한 영국법에 기초한 런던중재조항이 분쟁 당사자들에게는 공평하게 느껴질 수 있다. 하지만, 국내 선사들간의 해사 분쟁 중 다수가 런던중재를 이용하고 있는 것으로 나타나고 있다. 따라서 현재 대한상사중재원에서 취급하고 해사중재제도가 갖고 있는 문제점을 파악하고, 그 개선방안을 모색해 보았다. It is quite general that a dispute concerned with shipping, trading and insurance is referred to the arbitration panel instead of court. But, the number of case referred to the Korea Commercial Arbitration Board in respect of shipping become fallen every year. Instead, most disputes are referred to the London Maritime Arbitrators Association. The focus of this research is to investigate the current situation of arbitration cases in Korean shipping companies in more details. In the result of the research, it shows that more than 90% of charterparty dispute is referred to the London Maritime Arbitrators Association and only 2.2% is referred to the Korea Commercial Arbitration Board. That is why many leading cases under English law has become a principle of interpretation of the shipping contracts and become a custom in the shipping area. The contributory cause of the above situation is that the Korea Commercial Arbitration Board has a systematic problem. As many contracts concerned with shipping is internationally made, many people in the shipping area might feel that the London Arbitration Clause based on English law would be fair and reasonable. Nevertheless, we should recognize the Korea Commercial Arbitration Board's systematic problem and grope for a method of improving the systematic problem.

베이커리 제품소비함수 추정

모수원,정승태,김영숙 목포대학교 기업경영연구소 2000 企業經營硏究 Vol.4 No.1

The aim of this paper is to model and estimate the consumption demand for bread and cakes. We employ Engle-Granger two-step cointegration technique techique, Johansen's multivariate cointegration methodology and GPH test, because the model must be stationary to get the accurate predicted values. The empirical results show that our model is stationary as well as mean -reverting. This paper also applies impulse-response functions, variance decompositions and historical decompositions to our model, indicating that the consumption demands for bread and cakes are enogenous to as well as predictable with the income variable.

SHS 공정으로 제조된 Mo<SUB>x</SUB>W<SUB>1-x</SUB>Si₂ 발열체의 가속수명시험과 고장분석

이동원(Dong-Won Lee),이상헌(Sang-Hun Lee),김용남(Yong-Nam Kim),이희수(Heesoo Lee),이성철(Sung-Chul Lee),구상모(Sang-Mo Koo),오종민(Jong-Min Oh) 한국전기전자학회 2017 전기전자학회논문지 Vol.21 No.3

고온자전합성과 후열처리 공정으로 MoxW1-xSi₂ 발열체를 제조하였다. MoxW1-xSi₂ 발열체의 신뢰성을 검증하기 위해 가속수명시험을 수행하였으며, 수명시간을 Minitab 프로그램으로 추정하였다. 또한, 가속수명시험 후의 MoxW1-xSi₂ 발열체의 고장분석을 전기적과 구조적 특성으로부터 수행하였다. 그 결과, MoxW1-xSi₂ 발열체의 지배적인 고장 유형은 발열체 내부의 크랙 형성과 SiO₂ 보호층의 박리임을 확인하였다. MoxW1-xSi₂ heaters were fabricated by self-propagating high-temperature synthesis (SHS) process and post sintering process. To validate the reliability of the MoxW1-xSi₂ heaters, the accelerated life test (ALT) was conducted, and then lifetime to MoxW1-xSi₂ heaters was estimated by using Minitab programs. Also, the failure analysis of MoxW1-xSi₂ heaters after ALT was performed through electrical and structural properties. As the results, it was confirmed that the dominant failure mode of MoxW1-xSi₂ heaters is the crack formation in heaters and the delamination of protective SiO₂ layers.

부산지역 고등학교 급식서비스에 대한 학생과 급식종사자의 평가

모성종,서재수,류은순 한국조리과학회 2005 한국식품조리과학회지 Vol.21 No.2

The purpose of this study was to evaluate the perception of students' and employees' perception with for their high school foodservicein Bustin area. For this purpose, questionnaires were distributed among the 324 students and 93 employees in 12 high schools in the Busan area. The students assessed the importance and performance of school foodservice as 4.00/5.00 and 2.97/5.00,, respectively, and the employees assessed the importance and performance of as 4.07/5.00 and 3.77/100, respectively. Tice importance mean scores of students wereshowed significantly (p<0.01) higher scores in internal environment factor and sanitation factor than those of employees, hut the performance mean scores of students wereshowed significantly (p<0.01) lower scores in all the factors than those of employees. The importance grid of students and employees showed that the items of the high with to the low with of consideration of preference in menu, appropriate the meal hours, rapidnessrapidity of service, and prompt dealing with complaints were high scores to the students, but low scoresto the employees. The performance grid of students and employees showed that the items of the low with students to the high with employeesfreslrness of food ingredients, offering the consistency of consistently good service, rapidnessrapidity of service, prompt dealing with complaints, communication between students and employees, and food cleanliness were low scores to the students, but high scores to the employees of dish. 'Therefore, it would seem to be desirable that the foodservice manager may be plans the strategies with the involvement of students in the process from planning the menu to proposinge of ideas for improvement.

차세대 고속철도 특수교량의 설계 및 기술사양 조사

박만호(Park Man-Ho),문제우(Mun Je-U),김성일(Kim Sung-Il),홍성모(Hong Seong-Mo),김종태(Kim Jong-Tae) 한국철도학회 2008 한국철도학회 학술발표대회논문집 Vol.- No.-

Mo-Am arch bridge is only the long-span bridge (with 125m span) in the Kyong-Bu high-speed line in service, while other bridges are PSC box girder bridges and steel composite bridges with span lengths of 25~50m. However, in foreign high-speed lines, special cable-supported bridges like cable-stayed bridges and extradosed bridges are being adopted in earnest with technical specifications. The cable supported bridge is recognized as one of the indices of technology in civil engineering field, and thus it is being adpoted with a sense of rivalry in countries with advanced technology in railway engineering. In this paper, to apply the top-level cable-supported bridge technology to the domestic high-speed line up to 400㎞/h by establishing the technical specifications on cable-supported bridges including span length, the requirements for securing the dynamic stability and running safety of high speed train are analyzed through case studies for domestic and foreign cases.