심실세동 환자의 심폐소생술 간호업무 프로토콜 개발

오숙희,장금성,최자윤 한국간호과학회 간호행정학회 2009 간호행정학회지 Vol.15 No.2

Purpose: In order to improve resuscitation rate of CPR through providing qualitative nursing while performing CPR in hospital ward and to enhance quality of emergency nursing in the ward, the author embarked on the research as a way of developing ventricular fibrillation protocol about CPR. Method: Collected data were analyzed by using the SPSS/PC14.0 program while the routes of final protocol developed in this research are as follows. Result: Based on analysis results of literature study and CPR electronic hospital records, a total of 22 items and 53 specific contents were confirmed through the gathering of opinions from panels, and the allotment of roles and tasks with a standard of 2 nurses was designated. As the result of specialists’ verification on validity, the final protocol composed of a total of 23 items and 45 specific contents was confirmed. At the result of the pertinency evaluation of confirmed protocol, it was evaluated as relatively pertinent with its average score 2.89-3.32. Conclusion: The protocol developed in this research is seen as to contribute to nurses participating in CPR to avoid the overlapping of tasks and to develop CPR through effective teamwork of medical teams by presenting clear roles and tasks.

HDPE 보강형 자착식 고무화 아스팔트 방수시트의 시공성 개선을 위한 접착특성 및 성능평가에 관한 연구

선윤숙,오상근 서울産業大學校 2005 논문집 Vol.54 No.2

The Waterproofing works are not only preventing underground water but also improving durability of concrete structure. Also test methods and materials of improvement will be studied in these days. In proving waterproofing materials apply to construction, but there are a lot of defect, It will make a economical loss. This paper will be examined the adhesive property of self adhesive asphalt sheet to minimize the problem on construction and environment, we test the materials performance and working in the jobsite to decrease of quality defect and ensure of prolonged durability of concrete structure. Besides, this study examined the material characters such as tension property, tear property, temperature dependence, heat resistance and adhesion stability etc.

대엽성 폐렴의 양상을 보인 폐 Cryptococcosis 1예

박석영,윤영연,오귀염,권낙기 대한화학요법학회 1996 대한화학요법학회지 Vol.14 No.2

A 26 year old lady was admitted due to fever and productive coughing of 10 days duration. She had been working at the office treating stuffs of oriental herb medicine without any problem in her health by then. Chest films revealed consolidative changes involving Lt. lower lobe and she was given systemic antibacterial antibiotics, but her illness was not improved. On 19th hospital day needle biopsy was performed and cryptococcosis was diagnosed involving both alveoli and intertitium. Antifungal agent, itraconazole, was prescribed for 10 weeks and the lesion was resolved completely without remnant change. We discussed this case with review of literatures.

균형조절 요인에 관한 고찰

이한숙,최흥식,권오윤 한국전문물리치료학회 1996 한국전문물리치료학회지 Vol.3 No.3

영구형 항서맥 심박조율기 환자의 장기추적관찰

최현석,이무용,최영진,최성준,김효수,손대원,오병희,이명묵,박영배,최윤식,이영우,이명용 대한순환기학회 1998 Korean Circulation Journal Vol.28 No.5

Thermocouple을 이용한 Buchanan Plugger 표면의 온도상승 분석

조진숙,황윤찬,김선호,황인남,최보영,정영진,정우남,오원만 전남대학교 치의학연구소 2003 구강과학 Vol.15 No.4

This study was performed to confirm the actual temperature rise on the surface of Buchanan plugger by evaluating the temperature rise on the surface of it, the peak temperature of pluggers of various size using thermocouple. The heat carrier system 'System B Heatsource' (Model 1005, Analytic Technologies, USA) and the Buchanan pluggers of F, FM, M and ML sizes are used for this study. The temperature was set to 200 which Dr. Buchanan's "Continuous wave of condensation" technique recommended on digital display and the power level on it was set to 10. The touch mode was used. Five thermocouples were placed in direct contact with the surface of each size of Buchanan's pluggers at 1 ㎜ increments from the tip to the 4 ㎜ length of shank. Each thermocouple was secured with cyanoacrylate adhesive and orthodontic resin block. The two wire leads of each thermocouple were connected to the appropriate channels of Data Logger. This was configured to simultaneously record input from the five thermocouples. The heat control spring was touched for 1, 2, 3, 4 and 5 seconds, and the temperature rise on the surface of the pluggers were measured at 1 sec intervals for more than 5 seconds with an accuracy of 0.01. Ten trials was determined for each plugger. The average of temperature rise and standard deviation was calculated for each size of plugger. The data were statistically analyzed by one-way ANOVA to determine their significance. The results as follows. 1. The position at which the temperature peaked was approximately at 1∼2㎜ far from the tip of Buchanan plugger (p<0.01). 2. The peak temperature was 215.25±2.28℃ in F plugger, 185.94±2.19℃ in FM plugger, 169.51±9.12℃ in M plugger, and 160.79±1.27℃ in ML plugger and the peak temperature was highest in F type and followed by, in descending order, FM type, M type. ML type showed the lowest peak temperature (p<0.01). This results suggest that the actual temperature on the surface of the pluggers does not correlate well with the temperature set on digital display. Heat concentrates around the tip. The larger plugger reveals lower temperature rise relatively.

열전대(thermocouple)를 이용한 Buchanan Plugger 표면의 온도상승 분석

조진숙,황윤찬,김선호,황인남,최보영,정영진,정우남,오원만 大韓齒科保存學會 2003 Restorative Dentistry & Endodontics Vol.28 No.4

This study was performed to evaluate the actual temperature rise on the surface of Buchanan plugger using thermocouple. The heat carrier system 'System B Heatsource'(Model 1005, Analytic Technologies, Redmond, WA, USA) and the Buchanan pluggers of F, FM, M and ML sizes are used for this study. The temperature was set to 200℃ on digital display and the power level on it was set to 10. Five thermocouples were placed in direct contact with the surface of each size of Buchanan's pluggers at 1 mm increments from the tip to the 4 mm length of shank. The heat control spring was touched for 5 seconds, and temperature rise on the surface of the pluggers were measured at 1 sec intervals for more than 5 seconds with an accuracy of 0.01 using Data Logger. The data were statistically analyzed by one-way ANOVA. The results were as follows. 1. The position at which the temperature peaked was approximately at 1~2 mm far from the tip of Buchanan plugger (p<0.01). 2. The peak temperature was 215.25±2.28℃ in F plugger, 185.94±2.19℃ in FM plugger, 169.51±9.12℃ in M plugger, and 160.79±1.27℃ in ML plugger and the peak temperature was highest in F plugger and followed by, in descending order, FM plugger, M plugger. ML plugger showed the lowest peak temperature (p<0.01). 3. The temperature on the pluggers was decreased with the increase of touching time. This results suggest that the actual temperature on the surface of the pluggers dose not correlate well with the temperature set on digital display. Heat concentrates around the up. The larger plugger reveals lower temperature rise relatively.

근관 전색재의 방사선 불투과성에 관한 비교연구

김태민,김서경,황인남,황윤찬,강병철,윤숙자,이재서,오원만 대한치과보존학회 2009 Restorative Dentistry & Endodontics Vol.34 No.1

This study was performed to assess the radiopacity of a variety of root canal sealers according to the Specification concerning root canal sealers. Ten materials including Tubli-Seal™, Kerr Pulp Canal Sealer™, AH 26^(R), AH plus^(R), AH plus jet™, Ad seal™, Sealapex™, NOGENOU™, ZOB seal™, Epiphany™, and dentin were evaluated in this study. In the first part. densitometric reading of an each step of aluminum step wedge on occlusal film was performed at different voltage and exposure time. In the second part, ten specimens were radiographed simultaneously with an aluminum step wedges on the occlusal films under decided condition. The mean radiographic density values of the materials were transformed into radiopacity expressed equivalent thickness of aluminum (mm Al). The following results were obtained 1 Among the various conditions, the appropriate voltage and exposure time that meet the requirement density was 60 kVp at 0.2 s 2 All of the materials had greater radiopacity than 3 mm Al requirement of ANSI/ADA specification No. 57 (2000) and ISO No. 6876 (2001) standards. 3 The radiopacity of materials increased as thickness of materials increased. 4 The mm Al value of each specimen at 1mm in thickness has a significant difference in the statistics. It suggests that root canal sealers have a sufficient radiopacity that meet the requirement. 다양한 근관전색제는 방사선 사진상 주위 해부학적 구조와 구별될 만한 방사선 불투과성을 나타내야 한다 따라서 이런 물질들이 근관에 충전될 때의 방사선 불투과성 정도를 평가해야 할 필요성이 대두되고 있다. 본 실험에서는 다양한 근관전색제들의 방사선 불투과성을 평가하고자, 방사선 노출조건에 따른 aluminium step wedge에 대한 광학 밀도를 알아보고, 그 중 적절한 노출조건을 선택하여 수종의 근관 전색재의 방사선 불투과성 정도를 알루미늄 두께로 환산하여 비교해 보고자 한다. 방사선 불투과성의 기준을 위해 11개의 step으로 구성된 aluminum step wedge을 사용하여, 60kVP, 70kVp관전압 상태에서 각각 0.2, 0.3, 0.4초 그리고 0.2, 0.3, 0.33초의 꼭 노출시간으로 교합필름상에서 방사선 촬영후 적절한 노출 조건을 구하였다. 직경 5mm 각각의 두께 0.5, 1.0, 1.5, 2.0, 2.5, 3.0 mm인 10종 (Tubli-Seal™, Kerr pulp Canal Sealer™, AH26^(R), AHplus^(R), AH plus jet starter kit™, Ad seal™, Sealapex™, Nogenol root canal sealer™, ZOB seal™, Epiphany™)의 근관전색재 시편을 각 재료와 두께당 10개씩 제작한 후, 동일한 두께의 상아질 시편, aluminum step wedge와 함께 정해진 노출시간에 따라 방사선 촬영을 하였다. 모든 필름은 자동현상기로 현상하였다. 시편의 방사선 흑화도를 densitometer로 5회 반복 측정 후, 평균값을 구하여 알루미눔 두께로 환산하였다.얻어진 정보를 분석하여 다음의 결과를 얻었다. 1 관전압 60 kVp에서 노출시간 0.2, 0.3, 0.4초, 70 kVp에서 0.2, 0.3, 0.33초로 변화를 주어 방사선 촬영을 하였을 때 흑화도가 ISO No. 6876 규격에 가장 적합한 것은 60 kVP, 0.2초 일 경우였다. 2 측정된 근관 전색제의 방사선 불투과성은 2.29 mm Al (N0GEN0L)로부터 13.69 mm Al (AH Plus jet)까지 다양하게 나타났으나, 모두 ANSI/ADA specification (2000) 또는 ISO No. 6876 (2001) 규격이 제시한 최소한 3mm Al 이상의 방사선 불투과성을 지녀야 한다는 기준에 적합하였다. 3 재료의 두께가 증가할수록 방사선 불투과성은 증가하지만, 정비례하지는 않았다. 4 각 실험재료의 1 mm 두께의 시편에 대한 mm Al값들은 통계적으로 유의한 차이가 있었다. 이상의 결과는 본 실험에 사용된 수종의 근관 전색재는 모든 규격에 적합한 방사선 불투과성을 가지고 있음을 시사한다.

Profile^(Ⓡ), ProTaper™ 및 K^(3TM) Ni-Ti파일의 과기구 조작이 치근단공 변위에 미치는 영향

양현,양인석,황윤찬,황인남,윤숙자,김원재,오원만 대한치과보존학회 2007 Restorative Dentistry & Endodontics Vol.32 No.2

본 연구는 ProFile, ProTaper 및 K^(3)를 이용하여 과잉 기구 조작에 의해 근관 성형 시 근관의 만곡형태와 Ni-Ti 파일의 종류에 따라 치근단공이 어떻게 변위 되는지를 비교 분석하고자 시행되었다. 본 실험에서는 레진모형근관으로 J자와 S자의 근관 형태가 재현된 ENDO-TRAINING BLOC을 사용하였다. 근관 성형 기구로는 ProFile^(®), ProTaper™, K^(3TM)를 사용하였다. 총 60개의 레진모형근관을 사용하였으며, 사용된 레진모형근관 및 Ni-Ti 파일의 종류에 따라 10개씩 6개의 군으로 나누어 근관성형을 시행하였다. 근관 성형 전·후 이미지를 Image-analyzing microscope 100X를 이용하여 얻고 Photoshop 7.0 프로그램을 이용하여 중첩하였다. 이미지 분석 프로그램을 이용하여 근관 성형 전·후 치근단공의 중심으로부터의 직경 변화량과 면적을 측정한 결과 만곡된 근관의 성형시 치근단공이 주로 만곡의 외측으로 변위됨을 나타내며 ProFile이 ProTaper나 K^(3) 보다 통계적으로 유의성이 있게 작은 변화량을 나타내어 근관성형시 바람직한 기구임을 시사한다. This study was done to evaluate transportation of the apical foramen after 0.5 mm overinstrumentation by ProFile, ProTaper and K^(3) in simulated resin root canal. Sixty simulated resin root canal with a curvature of J and S-shape were divided into two groups. Each group consisted of three subgroups with 10 blocks according to the instruments used: ProFile^(®), ProTaper™, and K^(3TM). Simulated resin root canal was prepared by ProFile, ProTaper and K^(3) with 300 rpm by the crown-down preparation technique. Pre- and post-instrumentation apical foramen images were overlapped and recorded with Image-analyzing microscope 100X (Camcope, Sometech Inc, Korea). The amounts of difference in width and dimension on overlapped images were measured after reference points were determined by Image Analysis program (Image-Pro^(®) Express, Media Cybernetic, USA). Data were analyzed using Kruskal-Wallis and Mann-Whitney U-test. The results suggest that ProFile showed significantly less canal transportation and maintained original apical foramen shape better than K^(3) and ProTaper.

서울 시내 4년제 남자 대학생의 우울과 흡연량, 흡연기간, 니코틴 의존도와의 관계

박지영,박소영,이미숙,백수진,신의경,예혜련,오승진,장윤정,조혜진,김수지 이화여자대학교 간호과학대학 2003 이화간호학회지 Vol.- No.37

Background: With reports on the relation between smoking and depression appearing since 1980, it has become clear that depression is one of the psychodynamics of smoking, though there has been little or no progress made in the study of whether or not there is indeed a relation between depression and nicotine dependence. Purpose: The purpose of the study was to investigate the effects of depression on the amount and period of smoking and nicotine dependence among university man student smokers. Method: In periodical examination between 14 and 21, May, 2003, using 170 university male. The CES-D(Center for Epidemiologic Studies Depression) Scale and the FTQ(Fagerstrom Tolerance Qustionnaire) were utilized to measure the level of depression and nicotine dependency. The amount of smoking was calculated based on the number of cigarette used. Result: Results indicated that depression had something to do with amount of smoking. Nicotine dependence also was related to depression but total value was relatively low. finally the period of smoking had nothing to do with depression. Conclusion: The results of this study revealed that the amount of smoking of university man student smokers was very high. Both the amount of smoking and nicotine dependence were affected by levels of depression. Accordingly psychiatric nursing access such as emotional support is needed to manage depression and decrease smoking.