Effects of Y₂O₃ additions on the oxygen diffusion in top-seeded melt growth processed YBa₂Cu₃O_7-y superconductors

Jun, B.H.,Jung, S.A.,Park, S.D.,Park, B.J.,Han, Y.H.,Kim, C.J. North-Holland 2011 Physica. C, Superconductivity Vol.471 No.21

To understand the effect of Y<SUB>2</SUB>BaCuO<SUB>5</SUB> (Y211)/YBa<SUB>2</SUB>Cu<SUB>3</SUB>O<SUB>7-y</SUB> (Y123) interfaces on the oxygen diffusion in single grain YBa<SUB>2</SUB>Cu<SUB>3</SUB>O<SUB>7-y</SUB> superconductors, single grain Y123 superconductors with 0.05 and 0.3moles of Y<SUB>2</SUB>O<SUB>3</SUB> additions were fabricated by a top-seeded melt growth (TSMG) process. Y123 compacts with Y<SUB>2</SUB>O<SUB>3</SUB> additions were subjected to melt growth heating cycles with a cooling rate of 1<SUP>o</SUP>C/h through a peritectic temperature (1015<SUP>o</SUP>C) and then annealed at 450<SUP>o</SUP>C for 200h in flowing oxygen. The superconducting temperature (T<SUB>c</SUB>) and critical current density (J<SUB>c</SUB>) were estimated for the three different regions (top surface (s), intermediate (i) and center (c)) of samples. The amount of Y211/Y123 interface area in single grain Y123 superconductors was successfully controlled by Y<SUB>2</SUB>O<SUB>3</SUB> additions. The T<SUB>c</SUB> values of s regions were higher than those of i and c regions, which indicates the presence of more oxygen at the sample surfaces. In addition, the T<SUB>c</SUB> values of i and c regions of the Y123 sample with 0.3mole Y<SUB>2</SUB>O<SUB>3</SUB> addition were higher than those of the same regions of the Y123 sample with 0.05mole Y<SUB>2</SUB>O<SUB>3</SUB> addition due to the promoted oxygen diffusion through Y211/Y123 interfaces and other related defects. In spite of the promoted oxygen diffusion by Y<SUB>2</SUB>O<SUB>3</SUB> addition, the large T<SUB>c</SUB> difference among the regions still existed, which suggests sluggish oxygen diffusion into single Y123 grains.

Effects of calcium doping on the superconducting properties of top-seeded melt growth processed Y_1.5Ba_2-xCa_xCu₃O_y superconductors

Park, S.D.,Kim, H.J.,Park, B.J.,Han, Y.H.,Jun, B.H.,Lee, J.S.,Kim, C.J. North-Holland 2011 Physica. C, Superconductivity Vol.471 No.21

The effect of calcium doping on the superconducting properties of top seeded melt growth (TSMG) processed Y<SUB>1.5</SUB>Ba<SUB>2-x</SUB>Ca<SUB>x</SUB>Cu<SUB>3</SUB>O<SUB>y</SUB> superconductors was studied in terms of calcium content (X<SUB>ca</SUB>). YBa<SUB>2-x</SUB>Ca<SUB>x</SUB>Cu<SUB>3</SUB>O<SUB>7-δ</SUB> (X<SUB>ca</SUB>=0, 0.005, 0.01, 0.02, 0.04, 0.1, 0.3) powders were synthesized by the powder calcination method. YBa<SUB>2-x</SUB>Ca<SUB>x</SUB>Cu<SUB>3</SUB>O<SUB>7-δ</SUB> powders were mixed with 0.25mole Y<SUB>2</SUB>O<SUB>3</SUB> powder and 1wt.% CeO<SUB>2</SUB> as Y<SUB>2</SUB>BaCuO<SUB>5</SUB> (Y211) refiner, and finally made into Y<SUB>1</SUB>.<SUB>5</SUB>Ba<SUB>2-x</SUB>Ca<SUB>x</SUB>Cu<SUB>3</SUB>O<SUB>y</SUB> (Y1.5)+1wt.% CeO<SUB>2</SUB> composition. The single Y123 growth on the top surface was observed up to X<SUB>ca</SUB>=0.1, while the multiple Y123 growth was observed at X<SUB>ca</SUB>≥0.1. The superconducting transition temperature (T<SUB>c</SUB>) and critical current density (J<SUB>c</SUB>) of TSMG processed Y1.5 samples were inversely proportional to X<SUB>ca</SUB>. The Y211 size increased with increasing X<SUB>ca</SUB> due to the enhancement of Y211 coarsening by calcium doping. No Y211 refining effect by CeO<SUB>2</SUB> was observed in the calcium doped samples. The T<SUB>c</SUB> and J<SUB>c</SUB> decrease by calcium doping are likely to be due to the calcium incorporation with the Y123 lattice and formation of coarse Y211 particles.

VP2 capsid domain of the H-1 parvovirus determines susceptibility of human cancer cells to H-1 viral infection

Cho, I-R,Kaowinn, S,Song, J,Kim, S,Koh, S S,Kang, H-Y,Ha, N-C,Lee, K H,Jun, H-S,Chung, Y-H Nature America, Inc. 2015 Cancer gene therapy Vol.22 No.5

Although H-1 parvovirus is used as an antitumor agent, not much is known about the relationship between its specific tropism and oncolytic activity. We hypothesize that VP2, a major capsid protein of H-1 virus, determines H-1-specific tropism. To assess this, we constructed chimeric H-1 viruses expressing Kilham rat virus (KRV) capsid proteins, in their complete or partial forms. Chimeric H-1 viruses (CH1, CH2 and CH3) containing the whole KRV VP2 domain could not induce cytolysis in HeLa, A549 and Panc-1 cells. However, the other chimeric H-1 viruses (CH4 and CH5) expressing a partial KRV VP2 domain induced cytolysis. Additionally, the significant cytopathic effect caused by CH4 and CH5 infection in HeLa cells resulted from preferential viral amplification via DNA replication, RNA transcription and protein synthesis. Modeling of VP2 capsid protein showed that two variable regions (VRs) (VR0 and VR2) of H-1 VP2 protein protrude outward, because of the insertion of extra amino-acid residues, as compared with those of KRV VP2 protein. This might explain the precedence of H-1 VP2 protein over KRV in determining oncolytic activity in human cancer cells. Taking these results together, we propose that the VP2 protein of oncolytic H-1 parvovirus determines its specific tropism in human cancer cells.

Effective pore control and critical current density in liquid infiltration growth processed Y-123 superconductors with Ag addition

Mahmood, A,Jun, B-H,Han, Y H,Kim, C-J IOP Publishing Ltd 2010 Superconductor science & technology Vol.23 No.6

<P>The effect of a sintered density (open porosity) of Y<SUB>2</SUB>BaCuO<SUB>5</SUB> (Y211) pre-forms on the final porosity and Y211 size within Y Ba<SUB>2</SUB>Cu<SUB>3</SUB>O<SUB>7 − <I>y</I></SUB> (Y-123) products was systematically studied in liquid infiltration growth (LIG) processed Y-123 bulk superconductors with Ag addition. To prepare Y211 pre-forms of various densities, Y211 powder compacts were sintered in air at various temperatures of 900–1200 °C. The single-grain Y-123 bulk superconductors were fabricated by the LIG process with top seeding. It was found that the porosity of the final Y-123 product was fairly dependent on the Y211 pre-form density. When a Y211 pellet of a high density was used as a pre-form for the LIG process, the porosity of the final Y-123 product was greatly reduced. In addition to the reduced porosity, the enhanced Y211 refinement was achieved for the Y-123 product prepared using the dense Y211 pre-form, resulting in the improved critical current density (<I>J</I><SUB>c</SUB>). The Ag addition was also helpful in eliminating the spherical pores through pore filling with a silver melt. The pore elimination and Y211 refinement mechanism in the LIG-processed Y-123 bulks were explained in terms of the liquid capillary movement and Ag melt and particle coarsening at the (Y 211 + melt) state.</P>

Particle distribution in melt-processed Y_1.5 Ba₂Cu₃O_x superconductors with BaCeO₃ addition

Youn, J.S.,No, K.,Kim, Y.H.,Mahmood, A.,Jun, B.H.,Han, Y.H.,Sung, T.H.,Kim, C.J. North-Holland 2009 Physica. C, Superconductivity Vol.469 No.15

To understand the effect of BaCeO<SUB>3</SUB> on a Y<SUB>2</SUB>BaCuO<SUB>5</SUB> (Y211) distribution, Y<SUB>1.5</SUB>Ba<SUB>2</SUB>Cu<SUB>3</SUB>O<SUB>x</SUB> (Y1.5) superconductors with/without 1wt.% BaCeO<SUB>3</SUB> additions were prepared by a top-seeded melt-textured growth (TSMG) process. Two different BaCeO<SUB>3</SUB> powders (as-synthesized (coarse powder) and an attrition-milled (fine powder)) were used and the size effect was compared with that obtained from a Y1.5 sample with no addition. A refinement of the Y211 particles was achieved for both the as-synthesized and attrition-milled BaCeO<SUB>3</SUB> additions. The distribution of the Y211 particles was most uniform in the Y1.5 sample prepared with the attrition-milled BaCeO<SUB>3</SUB> powder due to the reduced size of the Y211-free regions by the fine size BaCeO<SUB>3</SUB> addition. The highest J<SUB>c</SUB> was achieved in the Y1.5 sample prepared with the attrition-milled BaCeO<SUB>3</SUB> powder. The J<SUB>c</SUB> result agreed well with the microstructure variations by the addition of BaCeO<SUB>3</SUB> powders.

Effects of $BaCO_3$ purity on the superconducting properties of top seeded melt growth processed $Y_{1+x}Ba_2Cu_3O_y$ superconductors

Choi, J.S.,Park, S.D.,Jun, B.H.,Han, Y.H.,Sung, T.H.,Choo, K.N.,Kim, C.J. The Korean Society of Superconductivity and Cryoge 2009 한국초전도저온공학회논문지 Vol.11 No.2

Effects of $BaCO_3$ purity on the superconducting properties of top seeded melt growth (TSMG) processed $Y_{1+x}Ba_2Cu_3O_{7-y}$ (Y1+x, x=0.1 and 0.2) superconductors were investigated. $YBa_2Cu_3O_{7-y}$ (Y123) powder prepared using $BaCO_3$ with 99.75% purity and commercially available Y123 powder of 99.9% were used for the fabrication of single Y123 grain superconductors. $T_c$ values of the Y1+x samples prepared using low purity Y123 powder were slightly lower than those of the samples prepared using a high purity powder. In addition to the lower $T_c$, an anomalous peak effect in the intermediate magnetic fields was observed in Y1+x samples prepared using the low purity $BaCO_3$ powder. The slight decrease in $T_c$ and the anomalous peak effect are ascribed to the possible incorporation of a Y123 phase with impurity elements such as strontium and calcium included in the $BaCO_3$powder of 99.7%. The result suggests that the low purity $BaCO_3$ powder of a low price can be used as a raw power for the fabrication of single grain YBCO bulk superconductors.

고온용 이트륨 첨가 팩 알루미나이징 다층코팅 공정개발

전재호,김규영 대한금속재료학회(대한금속학회) 1993 대한금속·재료학회지 Vol.31 No.3

A coating process for a multilayer coating of aluminide and yttrium was developed for high temperature applications. Aluminide coating was carried out by pack cementation method, while yttrium was incorporated by an ion plating method. Various combinations of pack alumininzing and yttrium (Y) ion plating were examined with respect to coating sequence, aluminum activity, and corrosion environment. The best corrosion resistance for high temperature hot corrosion was obtained from a multilayer coating of H/A+Y(high activity aluminizing+Y-ion plating) type. Uniformity of the Y deposition was greatly dependent upon the surface condition of the aluminide coating layer. The high activity aluminide coating gave better uniformity of Y deposition than did the low activity aluminide coating. Improvement of corrosion resistance by the Y-modified aluminide multilayer coatings of H/A+Y type was attributed to the fact that presence of Y along the Al₂O₃columnar grain boundaries prohibits substantially depletion of Al contained in the aluminide coating layer. The consistent and prolonged supply of Al thus improves the Al₂O₃scale adherence and stability.

Satisfaction with mammography in the National Cancer Screening Programme participants of age 40s in Korea

JEON, B.Y.,LEE, H‐,Y.,PARK, E‐,C.,CHOI, K.S.,JUN, J.K.,KIM, Y.,HAN, M.A.,YOON, N‐,H.,KIM, E.J.,JEON, S.M. Blackwell Publishing Ltd 2011 European journal of cancer care Vol.20 No.6

<P>JEON B.Y., LEE H‐Y., PARK E‐C., CHOI K.S., JUN J.K., KIM Y., HAN M.A., YOON N‐H., KIM E.J. & JEON S.M. (2011) <I>European Journal of Cancer Care</I><B>20</B>, 803–809</P><P><B>Satisfaction with mammography in the National Cancer Screening Programme participants of age 40s in Korea</B></P><P>The aim of this study was to evaluate satisfaction with the National Cancer Screening Programme of mammography in Korea and to examine the association between subscales of satisfaction and general satisfaction. We conducted a cross‐sectional telephone survey for women who had obtained a National Cancer Screening Programme mammographic screening at general hospitals between May and October 2008. The present study included 2005 women in their forties. We performed multivariate linear regression using dependent variable as general satisfaction and independent variables as subscales of satisfaction, such as pre‐screening information transfer, staff interpersonal skills, physical surroundings and results reporting. Participants were stratified according to the result of their mammogram as negative or positive. Mean score of satisfaction was above 2.5 of 4 for all subscales. Women who received positive results were less satisfied with all of subscale factors. Staff interpersonal skills were the most important factor that contributed to general satisfaction. Future efforts such as staff training programme of communication/attitude skills, ensuring privacy and explanation of possible discomfort of the screening would be needed.</P>

딥러닝 기반의 ODS 데이터 모니터링을 통한 대형레이다 PHM 시스템

신동준(Dong-Jun Shin),손동훈(Dong-Hun Son),임성환(Sung-Hwan Yim),이종학(Jong-Hak Lee),유구현(Gu-Hyun Ryu) 한국소음진동공학회 2019 한국소음진동공학회 학술대회논문집 Vol.2019 No.10

HIV진단시약에 대한 HIV감염자의 항체 반응성에 대한 연구(Ⅱ)

허숙진,장영식,김태숙,최민호,김성순,기미경,전원경,박미애,?권석,김태규,신영오 국립보건연구원 1994 국립보건원보 Vol.31 No.1