Simplified Effective Compressive Strengths of Columns with Intervening Floor Slabs

Seung?Ho Choi,Jin?Ha Hwang,Sun?Jin Han,Hae?Chang Cho,Jae Hyun Kim,Kang Su Kim 한국콘크리트학회 2020 International Journal of Concrete Structures and M Vol.14 No.5

The current design codes discuss the effective compressive strengths of columns, which reflect a decrease in load transfer performance that can occur when columns and slabs have different concrete compressive strengths. The effective compressive strength of a column increases as it is confined by the slab, and the design codes mandate three different effective compressive strengths for interior columns (confinement on four sides), exterior columns (confinement on three sides), and corner columns (confinement on two sides). For both corner and exterior columns, the confinement effect of the slab is significantly smaller than that for the interior column, and there is a more marked decrease in load transfer performance. However, there is still a lack of theoretical studies investigating the effective compressive strengths of the corner and exterior columns. Therefore, based on the analysis model established in previous research, this study has proposed an equation for calculating the effective compressive strengths of the corner, exterior and isolated columns without any confinement effects of the slab. In addition, axial loading tests of isolated columns were conducted and the proposed equation was verified.

어린이 그림책의 교육인간학적 의의

백승화 ( Seung Hwa Baek ),강기수 ( Gi Su Kang ) 한국어린이문학교육학회 2012 어린이문학교육연구 Vol.13 No.3

그림책은 언어와 그림이라는 두 가지 서로 다른 매체가 결합하여 의미를 전달하는 독특한 의사소통의 수단이자 글과 그림이 어우러진 새로운 예술형식이다. 또한 그림책은 어린이가 접하는 최초의 책으로 오늘날 많은 어린이에게 보편화된 교육매체이다. 따라서 본 논문은 어린이와 그림책을 교육 인간학적 관점에서 체계적으로 이해하고, 그림책을 통해 어린이 존재의 사고 특징을 고찰하고자 하였으며, 이에 근거하여 어린이 그림책의 교육인간학적 의의를 탐색하고자 하였다. 그림책에 반영된 어린이 사고의 특징을 살펴보면, 어린이는 물활론적 사고, 환상적 사고, 모험적 사고를 하는 존재로서, 어린이의 다양한 사고는 유기적 결합에 의해 상호연관을 가지며 발달해감을 알 수 있었다. 이러한 논의를 바탕으로 어린이 그림책의 교육인간학적 의의를 제시하면, 우선 어린이 그림책은 어린이에 대한 깊은 이해가 가능하게 하였으며, 어린이에게 풍부한 경험을 제공한다. 또한 어린이 그림책은 어린이의 관계형성에 기여하며, 어린이의 주체적인 자아형성의 토대를 마련해 준다. Picture books are a unique communicative tool and a new kind of art in which letters and pictures are combined. Picture books are also a popularized educational medium in teaching children how to read. Therefore, the picture book is, for children, a literary, artistic, and educational resource. This study explores the strategies of how picture books can be used for children`s education by understanding the essential characters of picture books and the relationship between children and picture books. The study finds that children engage in animistic, fantastic and adventurous thinking. Through analyzing the characteristics of children`s thinking reflected in children`s books, the study finds these three characteristics are interwoven and children`s thinking develops in this interwoven relationship. The educational-anthropological significance of children`s picture books is as follows: Firstly, picture books enable educators to understand children and to show a concrete direction of children`s education. Secondly, picture books provide an aesthetic experience to make children aware of beauty. They also serve as a foundation for children`s relationships and shape each child`s independent self. The author suggests this is the educational task of the picture books. In order to promote the authentic education of children through picture books, it is crucial to recognize the educational importance of the picture book. It is also necessary to foster an environment that is conducive for children to read picture books and to encourage self-motivated reading. It is necessary to study various aspects of children`s picture books in order to produce good quality picture books.

이동 애드 혹 네트워크에서의 환경적응형 QoS AODV 라우팅 프로토콜에 관한 연구

裵振勝,宋東勳,吳世德,鄭燦赫,金玄郁,李光培,文泰洙,郭承郁,河載承 明知大學校 産業技術硏究所 2004 産業技術硏究所論文集 Vol.23 No.-

In this paper, we propose a bidirectional mobile Ad Hoc routing protocol based on AODV(ad-hoc on-demand distance vector routing) with QoS(quality of service) support. At presence, wireless mobile communication focuses on how to efficiently support mobility of users more than QoS guarantee. However, in order to satisfy requirement of various applications which have been or will be served, QoS guarantee between end points is a very important issue. The existing AODV routing protocol is implemented to use only BE (Best Effort) service. However, actual wireless mobile environment requires to reduce a waste of communication resources and meet with the real-time change of data paths by setting up routes with QoS support, considering available communication resources at each node in advance. Therefore, in this thesis, we propose an adaptive QoS support method using hello message in order to rapidly meet with the change of available communication resources and to smoothly perform route maintenance. For performance evaluation, we analyzed the average data reception rate. At that time, we used evaluation parameters such as node's mobility-stop time, hello message period, and packet priority, considering the node's mobility and the number of best effort/QoS data flows. As results, we found that with our proposed method the average data reception rate was increased 16.293%, 15.914%, 17.238% for 300 mobility-stop second case and 4.809%, 4.264%, 2.956% for 300 mobility-stop second case.

Lithographically-featured photonic microparticles of colloidal assemblies

Lee, Su Yeon,Kim, Shin-Hyun,Heo, Chul-Joon,Hwang, Hyerim,Yang, Seung-Man Royal Society of Chemistry 2010 Physical Chemistry Chemical Physics Vol.12 No.38

<P>We have described a new and promising strategy for the fabrication of composite and porous photonic crystal microparticles that combines the self-assembly of colloidal particles with photolithography techniques. We fabricated silica/SU-8 composite microparticles with photonic bandgaps <I>via</I> four steps: (1) deposition of the silica colloidal crystals on the photoresist, (2) embedding of the colloidal crystals in the photoresist, (3) UV exposure through a photomask and subsequent development, and (4) release of the microparticles from the substrate. Embedding was performed above the glass transition temperature (<I>T</I><SUB>g</SUB>) of uncrosslinked SU-8. At such temperatures, capillary forces on the silica particles facilitate the migration of colloidal crystals in the SU-8 matrix. Particle migration ceased when the top colloidal crystal layer was trapped at the interface between air and SU-8. In addition, we also prepared porous microparticles with an inverse opaline structure by dissolving the embedded silica particles from the composite structures. The porous microparticles showed enhanced reflectivity at the bandgap position due to the large refractive index contrast. The bandgap position of the microparticles was controlled by the size of the silica particles, which determined the lattice constant. Bilayered composite and porous microparticles with two distinct photonic bandgaps were also prepared by sequential deposition of colloidal crystals composed of two differently sized silica particles.</P> <P>Graphic Abstract</P><P>A new and promising fabrication strategy of photonic crystal microparticles was demonstrated by combining colloidal self-assembly with photolithography. <IMG SRC='http://pubs.rsc.org/services/images/RSCpubs.ePlatform.Service.FreeContent.ImageService.svc/ImageService/image/GA?id=c0cp00134a'> </P>

무선 애드 혹 기반 액티브네트워크상에서 QoS지원에 관한 연구

李基源,裵振勝,丁燦赫,金玄郁,李光培,姜景仁,朴京培,文泰洙,郭承郁,河載承 明知大學校 産業技術硏究所 2003 産業技術硏究所論文集 Vol.22 No.-

Abstract - In this thesis, we propose a QoS supporting method on wireless ad hoc-based active network for improving reliability. On the loss of route path, the existing DSR routing protocol has several problems with wireless network communication because of decease of data reception rate and increase of network load. The proposed method improves reliability of data transfer by using functions of active network. That is, by using functions of active nodes and active packets, the proposed method supports QoS with reservation transfer method that saves data packets on transfer at intermediate nodes with lost path and then re-transmit the packets after route reconfiguration.

요골동맥을 통한 관상동맥촬영 중 진단된 편위된 우측쇄골하동맥 1예

한승희,김수영,박혜경,박종성 영남대학교 의과대학 2012 Yeungnam University Journal of Medicine Vol.29 No.1

The left aortic arch with an aberrant right subclavian artery, or arteria lusoria, is the most common aortic arch anomaly, occurring in 0.5-2.5% of individuals. In such cases, the angular course of the arteria lusoria to the ascending aorta imposes difficulty in passing a guide wire to the ascending aorta during right transradial catheterization. Here, the case of a 53-year-old woman with intermittent chest tightness and coughing is reported. Aberrant right subclavian artery(arteria lusoria) was diagnosed via aortogram during right trans- radial coronary angiography. Compression of the esophagus and trachea by the aberrant right subclavian artery was demonstrated by chest computed tomography(CT).

국내 폐기물소각시설 배출가스와 소각재, 환경 매질, 식품 및 인체에서 검출된 다이옥신 농도수준 및 이성질체 유형 특성 : An Overview

김수진,박소영,최승필,이동수 한국환경독성학회 2004 환경독성보건학회지 Vol.19 No.1

Since dioxins became a serious concern in Korea, a significant number of investigations have been conducted to address diverse issues related to dioxins. However, the results have not been organized for ready access and use. The principal purposes of this work were to ⅰ) provide an archive of dioxin researches in Korea and ⅱ) give an overview of dioxin contamination. The focus of this work was placed on the contamination levels and characteristics concerning the waste incinerators emissions, environmental media, and biological samples (fishes/shellfishes, foods, and human body). Principal component analysis was conducted to identify common and/or unique features and the important variables associated with the congener patterns. From a comprehensive search of academic journals, research and monitoring project reports, dissertations, and periodicals of other forms, a total of 115 counts were found that met the purposes of this study. The contamination level of various samples were summarized and compared to those reported in foreign literatures. The congener patterns varied largely with environmental media and distinguished particularly by OCDD, 1, 2, 3, 4, 6, 7, 8-HpCDF, and OCDF for the samples within the same media. The proximity to emission sources differentiated the congener patterns in air and soil samples by the fraction of OCDD.

달리기 시 운동화 중저의 경도가 신발굴곡각도의 크기에 미치는 영향

목승한,곽창수,권오복 한국운동역학회 2004 한국운동역학회지 Vol.14 No.2

S. H. MOK, C. S. KWAK, O. B. KWON. The Influence of Midsole Hardness of Running Shoes on Shoes Flex Angle during Running. Korean Journal of Sport Biomechanics, Vol. 14, No. 2, pp. 85-103, 2004. This study was conducted to determine what effects would the midsole hardness of running shoes have on shoe flex angle and maximum propulsive force. Furthermore, the relationship between the shoes flex angle and maximum propulsive force was elucidated in order to provide basic data for developing running shoes to improve sports performances and prevent injuries. The subjects employed in the study were 10 college students majoring in physical education who did not have lower limbs injuries for the last one year and whose running pattern was rearfoot strike pattern of normal foot. The shoes used in this study had 3different hardness, shore A 40(soft), 50(medium) and 60(hard). The subjects were asked to run at a speed of 4?.08m/sec, and their movements were videotaped with 2 S-VHS video-cameras and measured with a force platform. And the following results were obtained after analyzing and comparing the variables. 1. Although the minimum angle of shoes flex angle was estimated to appear at SFA4, it appeared at SFA2 except in those shoes with the hardness of 40. 2. The minimum angle of shoes flex angle was 145.1?with barefoot. Among the shoes with different hardness, it was the smallest when the hardness was 50 at 149.9? The time to the minimum angle was 70.7% of the total ground contact time. 3. Maximum propulsive force according to midsole hardness was the largest when the hardness was 50 at 1913.9?84.3N. There was a low correlation between maximum propulsive force and shoes flex angle.

흰쥐에서 염화비닐 폭로수준에 따른 소변내 thiodiglycolic acid 농도의 변화

왕승준,차봉석,노재훈,신동천,김명수,전근재 大韓産業醫學會 1999 대한직업환경의학회지 Vol.11 No.4

Objectives : It is the objective of this research to identify the variation of thiodiglycolic acid(TdGA) in urine with vinyl chloride monamer(VCM) exposure levels through methylation. Methods : After rats were exposed to vinyl chloride monomer of 4 levels, 0㎎/㎥, 50㎎/㎥, 150㎎/㎥, 500㎎/㎥, respectively, of which urine was sampled in each sampling time of 0 hour, 2 hours, 4 hours, 8 hours, 16 hours, 36 hours, 48 hours. After urine had been methylated with diazomethane in the preliminary experiment and the peak of 146 m/z had been verified, the main experiment was done. Results : In the variation of TdGA with sampling times, concentration of TdGA increased rapidly in 4 hours and then decreased after 8 hours. When the variation of urinary TdGA concentration in urine according to exposure level of VGM was verified through Kruskal-Wallis statistical method at each sampling time, the significant increment with the exposure levels at 2 hours, 4 hours, 8 hours after exposure was clarified. Conclusion : TdGA concentration in urine with increment of VCM exposure level increased, especially significantly at 2 hours, 4 hours, 8 hours of sampling time.

意思決定範圍(SDM)의 變化에 의한 組織成長모델

李壽陶,劉承東 慶北大學校 産業開發硏究所 1984 硏究報告 Vol.12 No.-

The scope of decision making (SDM) is the main indicator of what managerial structure is necessary for an organization at a particular point in its life. The question of that elements by which we can measure the SDM thus becomes a basic and crucial one. The SDM is the totality of menagerial problems that require decisions to be made so that the organization will be able to continue its existence. The expansin of SDM takes place through one of the following three dimensions; (a) the level and variety of the technology employed by the organization, (b) the variety of its products or services, (c) the geographical of the organization The managerial structure of an organization must accord with its SDM at a particular point in time. That is, different SDM corresponds to different sized organizations and require different managerial structures to be able to operate efficiently and effectively, and thus survive. When an organization is created it usually has one product or service line and operates only in one area. Only through an entrepreneurial structure can an organization be created and operated. Until it is finally and firmly established it has to continue to be operated in this structure. This structure, however, ceases to be suitable when the level of technology is high and the equipment is effectively utilized. In such cases the organization must operate within a functional structure. As the organization grows and diversifies into two or more distinctly different products or services, the structure of the organization should be decentralized by product lines. Finally, When the organization is operating in a variety of countries that differ from one another in their natural culture, it must be operated in a mutlistructure. This last structure is a federation of the three basic structures.