http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
국내 고상가축분뇨 특성 및 이론적 메탄 잠재성에 대한 평가
최용준,이상락,Choi, Yongjun,Lee, Sangrak 한국축산환경학회 2016 한국축산시설환경학회지 Vol.22 No.1
This study was conducted to establish a database of high solid manure(HSM) in domestic. Theoretical methane potential and HSM characteristics was evaluated using breef and dairy manure (n=156). Total solids and Volatile solids of HSM increased depending on time flow, the results showed $20.4{\pm}3.2$ and $17.4{\pm}2.8%$. respectively. C/N ratio of breef HSM was higher than dairy HSM C/N ratio. In theoretical methane potential, the result of breef and dairy HSM was showed $505.2{\pm}25.3$ and $493.5{\pm}20.2$, respectively. Nitrogen content of total HSM increased depending on time flow, the result of breef and dairy nitrogen content was showed $1.9{\pm}0.3$ and $2.8{\pm}0.2$, respectively. Carbon content of total HSM showed approximately 10% reduction. The optimal time of bed replacement was indicated between 29 amd 31 days based on the optimal C/N ratio. Therefore, this study was considered that it has high utilization for livestock manure recycling and basis of relevant research.
나영준,황석진,최용준,박기태,이상락,Na, Youngjun,Hwang, Seokjin,Choi, Yongjun,Park, Geetae,Lee, Sangrak The Korean Society of Grassland and Forage Science 2018 한국초지조사료학회지 Vol.38 No.1
The objective of this study was to determine the effect of various roughage sources on nutrient digestibility and enteric methane ($CH_4$), and carbon dioxide ($CO_2$) production in goats. Four castrated black goats ($48.5{\pm}0.6kg$) were individually housed in environmentally controlled respiration-metabolism chambers. The experiment design was a $4{\times}4$ balanced Latin square design with 4 roughage types and 4 periods. Alfalfa, tall fescue, rice straw, and corn silage was used as representative of legume, grass, straw, and silage, respectively. Dry matter digestibility was higher (p < 0.001) in corn silage than in alfalfa hay. Dry matter digestibility of alfalfa hay was higher than those of tall fescue or rice straw (p < 0.001). Neutral detergent fiber digestibility of tall fescue was lower (p < 0.001) than those of alfalfa, rice straw, or corn silage. Daily enteric $CH_4$ production and the daily enteric $CH_4$ production per kilogram of $BW^{0.75}$, dry matter intake (DMI), organic matter intake (OMI), digested DMI, and digested OMI of rice straw did not differ from those of tall fescue but were higher (p < 0.001) than those of alfalfa or corn silage. Roughage type had no effect on enteric $CO_2$ emission in goats. Straw appeared to generate more enteric $CH_4$ production than legume or silage, but similar to grass.
곽성복(Sungbok Kwak),이상락(Sangrak Lee),김대식(Daesik Kim),장경훈(Kyunghun Gang),김정신(Jeungsin Kim),유영규(Youngkyu Yu),전승호(Seungho Jeon),박종(Jong Park),정선경(Sunkyoung Jeoung),이재용(Jaeyoung Lee),이평찬(Pyoung-Chan Lee),김덕 한국자동차공학회 2010 한국자동차공학회 학술대회 및 전시회 Vol.2010 No.11
무도장 자동차 내장부품 C/Pad에서의 감성은 soft touch감, 압축시 반발감, 접촉시 끈끈함, 접촉시 냉온감 등 주로 촉감에서 느껴지는 것들이 주된 요소인데, 이중에서 “soft touch감”이 가장 중요한 요소로 자동차의 고급화를 추진하기위한 소비자를 만족시켜야하는 현실적인 문제로 대두되고 있다. 자동차내장 부품에 적용되는 PP(폴리프로필렌)계 복합수지 낮은 가격 대비 뛰어난 기계적 물성과 경량 소재라는 특성 때문에 나일론, PC/ABS, PBT등의 대체 재료로 각광 받고 있으나, 낮은 충격강도, 낮은 내열성, 취약한 내스크래치성등의 문제가 항상 지적되어 왔으며, 이런 문제를 극복하기 위해 일부 내장 부품을 도장하거나, 무기물 충진재와 Rubber를 사용하여 내열성과 충격성을 향상시키는 것이 종래에 기술이었다. 그러나 도장 공정 사용되는 유기용매로 인해 휘발성 물질이 방출되는 문제점으로 강화되고 있는 환경규제에 노출되어 있으며, 무기물 충진재의 첨가로 스크래치, 질감의 문제로 감성을 중요시 하고 있다. 이에 따라 무도장 자동차 내장 부품에 친환경 고감성 플라스틱 부품의 개발이 시급한 문제로 대두 되고 있다.
3PL 업체의 기업물류 운송비용 산정을 위한 의사결정 지원시스템 개발
최지영(Jiyoung Choi),이상락(Sangrak Lee),이경식(Kyungsik Lee),이정훈(Jeong-hun Lee) 한국경영과학회 2017 經營 科學 Vol.34 No.1
The percentage of 3PL (Third-party Logistics), which uses third party businesses to outsource elements of the company"s distribution and fulfillment services, is increasing steadily. To provide 3PL service to the customers, it is needed to estimate the total transportation cost and propose the unit cost to the customers. In this paper, we develop a decision support system for estimation of transportation cost of 3PL provider considering various transportation services, such as direct transportation, multi point visiting transportation, and cross docking. The system supports route planning of vehicles by using algorithms based on tabu search and dynamic programming.
곽성복(Sungbok Kwak),주상률(Sangyul Ju),이상락(Sangrak Lee),문찬성(Chansung Moon) 한국자동차공학회 2009 한국자동차공학회 학술대회 및 전시회 Vol.2009 No.11
자동차 의장부품인 크래쉬 패드 표피재의 경우 재활용성 및 내구성에 치명적인 한계를 가지고 있는 PVC를 대체하는 TPO 및 TPU소재를 개발하여 적용 중에 있으나, 소재 가격 및 스크래치 향상을 위한 표면처리 공정비가 증가되어 자동차 부품업체와 제조사업체에 막대한 원가 부담이 되고 있는 상황이다. TPO의 경우는 스크래치향상을 위한 표면처리비용이, 분체 성형(Powder Slush Molding, PSM)에 적용되는 TPU의 경우는 소재자체 가격이 매우 높아서 막대한 원가부담을 안겨주고 있는 상황이며 장기 내구성이 다소 취약하다. 일반적으로 자동차 크래쉬 패드 스킨에는 TPO Skin을 이용한 Positive 진공성형을 주로 하고 있다. 그런데 TPO Skin은 질감 및 내마모성 저하로 도장 후처리 추가 공정이 필요 하다. 또한 저온상태에서 전개성이 불량 하다. “Negative 진공성형용 친환경 TPU소재 적용 크래쉬 패드 개발”은 무도장 처리로 부품 원가 절감효과 및 고강성(내스크래치성) 향상과 저온 전개성 향상 효과가 있다.
압출 구형 TPU Powder 적용 파우더 슬러쉬 공법 개발
곽성복(Sungbok Kwak),주상률(Sangyul Ju),이상락(Sangrak Lee),문찬성(Chansung Moon),정기연(Giyun Jeoung),한인수(Insu Han),조성민(Sungmin Cho) 한국자동차공학회 2009 한국자동차공학회 부문종합 학술대회 Vol.2009 No.4
크래쉬 패드 분체성형 공법적용 TPU 구형 파우더 소재 개발은 세계 최초로 Micro-pelletizing 기술을 분체 성형에 도입하여 기존3단계로 제조되는 파우더 제조공정을 1단계로의 공정단축을 통한 제조비용 감소가 가능하고, 특히 고비용의 저온동결 분쇄 공정을 생략됨으로써 제조비용을 획기적으로 줄일 수 있다. 또한, 입도분포 균열화를 통한 재료 Loss율 저감, 입자 구상화로 인한 분체 흐름성 향상을 통하여 핀홀(Pin-Hole)발생 억제 등의 우수한 성형성 확보가 가능하며 저온특성이 우수하여 Invisible 에어백장착이 가능하여 고부가가치화가 가능하다. 재활용성 측면에서 보면 TPU는 PVC와는 달리 열 회수를 위한 소각 시 인체유해 성분을 배출하지 않으므로 재활용성 향상이 가능하며, TPU의 경우는 중간재인 PU Foam과의 일체화로 재활용성이 더욱 향상된다. 따라서 크래쉬 패드 분체성형 공법적용 TPU 구형 파우더 소재 개발은 제조공정 단축을 통한 제조 비용감소, 소비자들의 내구성 향상 요구 만족 그리고 재활용성을 향상시킬 수 있는 기술로서 최근에 국내 자동차 제조사가 직면한 생존경쟁에서 유리한 위치를 점 할 수 있는 획기적 기술로서 연구의 가치가 높다고 판단된다. 본 연구에서는 이러한 TPU 소재를 최적의 입자 사이즈와 분체성형공법(PSM)에 적합한 소재를 개발하고자 한다.
고랭지에서 기후조건이 국내육성 옥수수 품종의 생육특성에 미치는 영향
김맹중(Meingjooung Kim),이승호(Seungho Lee),장선식(Sunsik Chang),김태일(Taeil Kim),최순호(Sun Ho Choi),조원모(Wonmo Cho),홍성구(Seonggu Hong),이상락(Sangrak Lee),김명화(Myeonghwa Kim) 한국초지조사료학회 2011 한국초지조사료학회지 Vol.31 No.4
본 연구는 표고 760 m 지역인 강원도 평창군 대관령면에 위치한 국립축산과학원 한우시험장에서 2009년부터 2010년까지 2년간 기후조건과 사일리지용 옥수수의 생육특성과 생산량의 관계를 검토하였다. 파종에서 수확기까지의 평균최저기온은 2009년에 12.29℃, 2010년에는 14.30℃ 였고 평균최고기온은 2009년 21.66℃, 2010년 23.48℃ 였다. 평균기온은 2009년 16.86 ℃, 2010년 18.66℃ 였다. 일조시간은 2009년도 711.3시간, 2010년 663.8시간이었고 강수량은 2009년 893.8 mm, 2010년 762.1 mm였다. 초기생육은 2009년에 광평옥, 강다옥, 청안옥, 청사옥, 평안옥 모두 1.2로 나타나 초기생육이 양호하였고 2010년에는 평안옥은 1.3으로 양호하였으나 다른 네 품종은 2.4~3.0으로 2009년보다 양호하지 못하였다. 착수고는 모든 품종의 평균값에서는 2009년도 86.8cm, 2010년도 106cm로 높은 유의차가 인정되었다(p<0.001). 줄기의 직경도 모든 품종에서 2010년도가 굵었으며 년도 간 유의차가 인정되었고(p<0.01, p<0.001), 모든 품종의 평균값에서도 높은 유의차가 나타났다(p<0.001). 초장은 2009년에는 200 cm 2010년에는 268 cm로 높은 유의차가 인정되었다(p<0.001). 출사에 소요된 평균기간이 2009년에는 103.8일, 2010년에는 90일로 연도에 따른 높은 상관관계가(p<0.001) 나타났다. 2009년도와 2010년도에 모든 품종에서 도복은 일어나지 않았으며 병충해의 피해도 나타나지 않았다. 암 이삭 비율은 모든 품종의 평균 비율은 2009년 23.4%, 2010년 62.1%로 두 배 이상의 차이가 나타났다. 모든 품종의 평균 생초수량은 2009년에 64, 611 kg/ha, 2010년도에 78, 733 kg/ha으로 나타났다(p<0.001). 건물생산량은 2009년 보다 평균기온이 높은 2010년에 많았다. 가소화영양소총량 비율은 강다옥과 청안옥은 2009년도에 높았으며 청사옥과 평안옥은 2010년도에 높게 나타났다. 조단백질의 함량은 모든 품종에서 2009년 보다 2010년에 더 많은 함량을 나타내었다. 본 연구 결과 기온과 생육특성 및 수량과의 관계를 보았을 때 고랭지에서는 광평옥과 평안옥이 재배하기 적합한 품종이었다. The aim of the present study was to investigate the relationship between climates, growth characteristic and yield of silage corn at Hanwoo Experiment Station, National Institute of Animal Science, Daegwallyeong in Gangwon Province located at altitude of 760 m, from 2009 to 2010. The mean minimum temperature was 12.29℃ from seeding to harvest in 2009, 14.30℃ in 2010, the mean maximum temperature was 21.66℃, 23.48℃, respectively. The mean temperature was 16.86℃ in 2009 and 18.66℃ in 2010, respectively. Duration of sunshine was 711.3 hours in 2009 and 663.8 hours in 2010, and precipitation was 893.8 mm in 2009 and 762.1 mm in 2010, respectively. In 2009, for all Kwangpyeongok, Gangdaok, Cheonganok, Cheongsaok, Pyeonganok, the early growth was good with 1.2, while in 2010 the growth for Pyeonganok was good with 1.3 comparing to others, which showed worse growth than in the previous year with 2.4~3.0. There was significant difference in the ear height between 2009 and 2010, showing mean value of 86.8 cm and 106 cm for all the species in 2009 and in 2010, respectively (p<0.001). In 2010, stem diameter for all the species were larger, and there was significant difference in mean value of the diameter between 2009 and 2010 (p<0.001). There was significant difference in the plant height and ear height between 2009 and 2010, showing 200 cm and 268 cm in 2009 and 2010, respectively (p<0.001). There was significant difference in the average days to silk, showing 103.8 days in 2009, 90 days in 2010, respectively (p<0.001). There was no lodging or disease-insect damage in all hybrid silage corn in both 2009 and 2010. The mean ear rates were 23.4% in 2009, but almost doubled, 62.1%, in 2010. There was significant difference in fresh yield between the two years, showing 64, 611 kg/ha in 2009 and 78, 733 kg/ha in 2010, respectively (p<0.001). Dry matter yields were higher in 2010 than in 2009. TDN yields of Gangdaok and Cheonganok were higher in 2009, whereas that of Cheongsaok and Pyeonganok were higher in 2010. Crude protein contents were higher in 2010 than in 2009 for all the species.