http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
지리정보시스템(GIS) 및 베이지안 확률 기법을 이용한 보은지역의 산사태 취약성도 작성 및 검증
최재원,이사로,민경덕,우익,Choi, Jae-Won,Lee, Sa-Ro,Min, Kyung-Duk,Woo, Ik 대한자원환경지질학회 2004 자원환경지질 Vol.37 No.2
본 연구의 목적은 1998년 보은 지역에서 발생한 산사태와 관련 자료간의 공간적인 관련성을 밝히고, 이를 이용하여 산사태 취약성도를 작성 및 검증하는 것이다. 산사태 위치는 항공사진 및 현장조사를 통해 탐지되었고, 지형, 토양, 임상, 토지 피복 둥의 자료는 GIS를 이용하여 공간 DB로 구축되었다. 산사태 발생과 관련된 요인으로써, 경사, 경사방향, 지형곡률, 지형종류, 토질, 토양모재, 토양배수, 유효토심, 임상, 임상 영급, 임상 경급, 임상 밀도, 암상, 선구조로 부터의 거리, 토지 피복 등이 사용되었다. 산사태와 이러한 요인들간의 관계를 밝히기 위해, 베이지안 확률 기법인 weight of evidence 기법이 적용되어서 >$W^{+}$->$W^{-}$인 constrast값을 계산하였다. 그 constrast값을 모두 합하여 산사태 취약성 지수를 계산하였고, 그 지수값을 이용하여 산사태 취약성도를 작성하였다. 산사태 취약성도는 관련된 재해를 줄이고, 토지이용 및 건설 등을 계획하는데 사용될 수 있다. The purpose of this study is to reveal spatial relationships between landslide and geospatial data set, to map the landslide susceptibility using the relationship and to verify the landslide susceptibility using the landslide occurrence data in Boun area in 1998. Landslide locations were detected from aerial photography and field survey, and then topography, soil, forest, and land cover data set were constructed as a spatial database using GIS. Various spatial parameters were used as the landslide occurrence factors. They are slope, aspect, curvature and type of topography, texture, material, drainage and effective thickness of soil. type, age, diameter and density of wood, lithology, distance from lineament and land cover. To calculate the relationship between landslides and geospatial database, Bayesian probability methods, weight of evidence. were applied and the contrast value that is >$W^{+}$->$W^{-}$ were calculated. The landslide susceptibility index was calculated by summation of the contrast value and the landslide susceptibility maps were generated using the index. The landslide susceptibility map can be used to reduce associated hazards, and to plan land cover and construction.
Eulerian-Lagrangian 다상 유동해석법에 의한 피에조 인젝터의 노즐 내부 비정상 캐비테이션 유동해석
이진욱 ( Jin Wook Lee ),민경덕 ( Kyung Duk Min ),강건용 ( Kern Yong Kang ),( M. Gavaises ),( C. Arcoumanis ) 한국분무공학회 2004 한국액체미립화학회지 Vol.9 No.4
N/A This study describes the analysis results of unsteady cavitating flows behavior inside nozzle of the prototype piezo-driven injector. This piezo-driven injector has been recognised as one of the next generation diesel injector due to a higher driven efficiency than the conventional solenoid-driven injector. The three dimensional geometry model along the central cross-section regarding of one injection hole has been used to simulate the cavitating flows for injection time by at fully transient simulation with cavitation model. The cavitation model incorporates many of the fundamental physical processes assumed to take place in cavitating flows. The simulations performed were both fully transient and `pseudo` steady state, even if under steady state boundary conditions. We could analyze the effect the pressure drop to the sudden acceleration of fuel, which is due to the fastest response of needle, on the degree of cavitation existed in piezo-driven injector nozzle
지질학적 선구조 분석을 위한 SAR 영상에서의 방향편차에 대한 정량적 분석
홍창기 ( Chang Ki Hong ),원중선 ( Joong Sun Won ),민경덕 ( Kyung Duk Min ) 大韓遠隔探査學會 2000 大韓遠隔探査學會誌 Vol.16 No.1
SAR 영상에 나타나는 지질학적 선구조는 안테나의 관측방향에 따라 증가 혹은 감소하여 나타난다. 본 연구에서는 지질학적 선구조 추출시 관측방향에 따라 발생하는 방향편차를 정량적으로 분석하였다. SAR 영상에 나타나는 방향편차의 정량적인 분석을 위해 Landsat TM 영상과 JERS-1 SAR 영상에서 각각 선구조를 추출하였으며 기본 선구조의 판단을 위해 TM 영상에서 추출된 선구조와 야외 조사자료 및 지질도상에 나타나는 단층선과의 연관성 분석을 실시하였다. 연구지역내의 SAR 영상에 나타나는 선구조는 관측방향에 평행할 때 최소를, 수직일 때 최대를 보이나 관측방향에 평행한 선구조일지라도 지형적인 특성에 따라 어느 정도 선구조의 추출이 가능한 것으로 나타났다. SAR 영상에 나타나는 선구조의 상대적 증감비율에 대한 분석 결과 길이는 33%~159%, 빈도수는 28%~187%의 증감을 보였으며 방향별 증감비율을 cosine 함수로 최적화하여 표현한 경우 관측방향에 수직인 방향을 기준으로 약 ±50˚이내 방향에서 TM에 비해 SAR 영상에서의 선구조 추출이 용이한 것으로 나타났다. 또한 길이가 짧은 선구조의 추출 여부는 관측방향에 따라 더 많은 영향을 받는 것으로 나타났다. SAR imagery usually reveals the influence of antenna look-direction on the delineation of geological structures. In this study, the look-direction bias in SAR image is quantitatively analyzed specifically for geological lineament study. Geologic lineaments are estimated using both Landsat TM and JERS-1 SAR images over the study area to quantitatively compare and analyze the look-direction bias in the SAR image. The standard geologic lineaments in the study area are established from lineaments estimated from TM images, field mapping, and fault lines in a published geologic map. The results show that lineaments normal to radar look-direction are extremely well enhanced while those parallel to look-direction are less visible as expected. However, certain lineaments even parallel to radar look-direction can still be detectable in a favorable topographic condition. Compared with TM image, the total number of detected lineaments in each direction in the SAR image increases or decreases ranging from 33% to 159% in length and from 28% to 187% in occurrence. The ratio of lineaments in SAR image to those in TM image with respect to direction can be fitted by a cosine function. The fitted function indicates that geological lineament is more easily detected in SAR image than in TM image within about ±50˚ normal to radar look-direction. And lineaments with limited extension appear to be more sensitive to the look direction bias effect.