http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
100% ASK 수신기를 위한 13.56㎒ RFID Tag용 클럭 복원회로 설계
김지곤(Jigon Kim),이경일(Kyeong-il Yi),김현식(Hyunsik Kim),김재환(J. H. Kim),김효종(Hyojong Kim),김시호(Shiho Kim) 대한전자공학회 2008 電子工學會論文誌-SD (Semiconductor and devices) Vol.45 No.11
ASK 100% RF 입력신호를 이용하는 13.56㎒ RFID 태그를 위한 클럭 복원회로를 제안하였다. 제안한 클럭 복원회로는, 레지스터로 조절되는 DLL을 이용하여 입력 RF 신호의 크기가 0인 구간에서도 기준 클럭 신호를 사용하지 클럭을 생성하도록 설계되었다. 제안한 회로는 TSMC 0.18㎛ 1P6M 공정을 사용하여 설계하였으며, 제안된 회로는 DLL의 위상 잠김 시간이 6.4usec 이하이며 공급전압이 3.3V에서 43uW를 소모한다. We have proposed a clock recovery circuit for 13.56㎒ RFID Tags using 100%, ASK RF input signal. The proposed clock recovery circuit generates clock pulses without reference clock by adapting register controlled DLL. The proposed circuit have designed by using a TSMC 0.18㎛ 1P6M CMOS technology. The simulated results show that the phase locking time of the proposed circuit is about 6.4 usec and power consumption is about 43㎼ at supply voltage of 3.3V.
Hagyoul Bae,Seok Cheon Baek,Sunyeong Lee,Jaeman Jang,Ja Sun Shin,Daeyoun Yun,Hyojong Kim,Dae Hwan Kim,Dong Myong Kim IEEE 2010 IEEE electron device letters Vol.31 No.11
<P>The separate extraction of asymmetric source (<I>R</I><SUB>S</SUB>) and drain (<I>R</I><SUB>D</SUB>) resistances caused by the variations in the layout, process, and device degradation is important in the practical modeling and characterization of MOSFETs and their integrated circuits. We propose a simple “parasitic junction current method” (PJCM) for the separate extraction of <I>R</I><SUB>S</SUB>, <I>R</I><SUB>D</SUB>, and <I>R</I><SUB>SUB</SUB> (substrate resistance) in MOSFETs. We applied the proposed PJCM to n-channel MOSFETs with different <I>W</I>/<I>L</I> combinations and verified its usefulness in the robust extraction of <I>R</I><SUB>S</SUB>, <I>R</I><SUB>D</SUB>, and <I>R</I><SUB>SUB</SUB>.</P>
소형 인공강우 장치에 의한 표준사 모형사면의 붕괴 예측
문효종(HyoJong Moon),김대홍(DaeHong Kim),정지수(JiSu Jeong),이승호(SeungHo Lee) 한국방재안전학회 2015 한국방재안전학회 논문집 Vol.8 No.2
본 연구는 강우 기간 동안에 불포화된 모형사면의 강우 침투로 흙 속에서의 다양한 조건인 간극 수압, 토압, 함수비의 변화에 대하여 조사하였으며 인공강우 장치에 의한 강우 재현으로 지반 내의 상태 변화에 따른 모형사면의 붕괴 예측에 대해서 분석하였다. This study analyzes the failure predict of model slope due to changes in ground condition followed by heavy rainfall with a simulated rainfall system. the movement of a slope from the rainfall penetrating the unsaturated soil is investigated with respect to various conditions of pore-water pressure, earth pressure and moisture content, considering rainfall duration and permeability.
김병용(ByoungYong Kim),장정수(JungSu Jang),반창봉(ChangBong Ban),이효종(HyoJong Lee),양승열(SeungYul Yang) 대한전자공학회 2012 전자공학회논문지 Vol.49 No.10
본 논문에서는 하드웨어 장비의 성능 및 기능을 검증하기 위한 방법으로 시험장비와 하드웨어 장비간의 연동시험을 하기 위한 점검 프로그램 설계 방법을 제안한다. 제안하는 점검 프로그램은 장비 스트레스를 최악의 조건에서 기능을 검증하여 사전에 고장 유무를 확인하고 수리함으로써, 비행체에 탑재하여 발생하는 고장률을 최소화하는 방안이다. 그리고 UML을 이용하여 객체 지향적으로 소프트웨어를 설계함으로써 다른 장비에 쉽게 적용할 수 있다. 점검 프로그램은 Architecture package와 Hardware package로 구성되어 있다. Architecture package는 시스템 관리, 로그분석, 메시지 수신 및 분석하는 역할을 한다. 시스템 관리에서 사용하는 메시지는 점검하기 위한 정보를 정의하고, 정의된 메시지는 이더넷으로 시험장비와 송수신한다. Hardware package는 점검해야 하는 하드웨어 및 시스템 관련 하드웨어를 관리하는 역할을 한다. 점검해야 하는 하드웨어는 내부 점검과 송수신 점검으로 구별되어 있다. 내부 점검은 하드웨어 자체적으로 점검하여 그 결과를 시험장비로 전송하는 방법이다. 송수신 점검은 통신디바이스 점검으로써 데이터를 전송하거나 수신하여 점검하는 방법이다. 모든 점검은 병렬적으로 점검함으로써 최악의 조건에서 장비의 고장유무를 확인한다. 시험한 결과는 약 1시간 동안에 디바이스들은 적게는 482번에서 많게는 15003번 점검하는 것을 확인하였다. 점검 프로그램은 하드웨어 장비의 신뢰성을 검증하는 환경/EMI 시험에 사용한다. This paper propose interacting test programming methods between test equipment and hardware unit to verify function and performance of the hardware unit under test. Proposed test program can minimizes the risk of failures when the unit is mounted on the aircraft by testing and verifying the unit under the worst stress condition. Also, Object oriented design using UML make it easy to apply in other equipments. Test program consists of architecture package and hardware package. Architecture package is in a role for system management, log analysis, message receiving and message analysis. Messages that are used by system management define messages for testing and defined messages is sent and received to test equipment through Ethernet. Hardware package is in a role for hardware management that is needed to be tested and is related to a system. Hardware to be tested is divided into internal test and transmission test. Internal test inspects hardware itself and reports the test results to the test equipment. Transmission test inspects communication device by sending or receiving data. All kinds of test is done in the worst condition of the test unit executing in parallel. Each device is tested at least 482 times and at most 15,003 times about one hour. Test program is utilized in hardware reliability test like as environmental test or EMI test.
Hien Duy Mai,Suncheol Kim,Hyojong Yoo 한국공업화학회 2020 Journal of Industrial and Engineering Chemistry Vol.82 No.-
Oxygen evolution reaction (OER) is considered a major challenge in the production of efficientelectrochemical water splitting devices. To overcome the challenge, the development of inexpensiveelectrochemical catalysts with high energy conversion efficiencies is vital. Nanohybrids composed ofnoble metal nanoparticles and transition metal hydroxides often possess catalytically active sites that arebeneficial for OER performance. In this study, we report a successful synthesis of Ni(OH)2 nanoflowerswith a high degree of crystallinity and uniformity. The as-prepared Ni(OH)2 nanoflowers are employed astemplates for effective and controllable loading of Au nanodots to obtain Ni(OH)2@Au nanohybrids. Anexamination of the OER activity reveals that Ni(OH)2@Au nanohybrids exhibit a considerably loweroverpotential (h) value (390 mV) at a current density of 5 mA cm–2 and a smaller Tafel slope (120 mV dec–1) than those of Ni(OH)2 nanoflowers (540 mV and 324 mV dec–1, respectively). The OER enhancementeffect is mainly attributed to the decoration of Au nanodots, inducing charge transfer from Ni to Au andthereby stabilizing the Ni species at high oxidation levels. Moreover, the uniform loading of Au nanodotson the anisotropic Ni(OH)2 nanoflowers provides more active interfacial surfaces, which are expedient toOER.