http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
100% ASK 수신기를 위한 13.56㎒ RFID Tag용 클럭 복원회로 설계
김지곤(Jigon Kim),이경일(Kyeong-il Yi),김현식(Hyunsik Kim),김재환(J. H. Kim),김효종(Hyojong Kim),김시호(Shiho Kim) 대한전자공학회 2008 電子工學會論文誌-SD (Semiconductor and devices) Vol.45 No.11
ASK 100% RF 입력신호를 이용하는 13.56㎒ RFID 태그를 위한 클럭 복원회로를 제안하였다. 제안한 클럭 복원회로는, 레지스터로 조절되는 DLL을 이용하여 입력 RF 신호의 크기가 0인 구간에서도 기준 클럭 신호를 사용하지 클럭을 생성하도록 설계되었다. 제안한 회로는 TSMC 0.18㎛ 1P6M 공정을 사용하여 설계하였으며, 제안된 회로는 DLL의 위상 잠김 시간이 6.4usec 이하이며 공급전압이 3.3V에서 43uW를 소모한다. We have proposed a clock recovery circuit for 13.56㎒ RFID Tags using 100%, ASK RF input signal. The proposed clock recovery circuit generates clock pulses without reference clock by adapting register controlled DLL. The proposed circuit have designed by using a TSMC 0.18㎛ 1P6M CMOS technology. The simulated results show that the phase locking time of the proposed circuit is about 6.4 usec and power consumption is about 43㎼ at supply voltage of 3.3V.
HF/UHF 멀티밴드 RFID 리더의 SiP 설계 및 구현
안광덕(Kwangdek An),이경일(Kyeong-il Yi),김지곤(Jigon Kim),조정현(Junghyun Cho),김시호(Shiho Kim) 대한전자공학회 2008 電子工學會論文誌-SD (Semiconductor and devices) Vol.45 No.10
UHF 대역과 13.56㎒를 동시에 지원하는 단일 패키지의 Multi band RFID 리더를 설계하고 SiP (System in Package)로 구현하였다. 제안된 리더 시스템은 UHF 대역에서 많이 사용되는 EPC Class1 Gen.2 표준과 HF대역인 13.56㎒에서 사용하는 ISO14443 A/B, ISO15693 프로토콜을 지원하고, RISC 코어에 탑재된 내장형 S/W에 의하여 동작 모드를 선택하도록 설계되었다. 제작된 시스템은 40㎜ × 40㎜, 4 layer의 SiP 위에 구성되어 있으며 3.3V의 단일 공급전압으로 최대 210㎃의 전류 소모를 통해 13.56㎒의 경우 최대 5㎝, UHF 대역의 경우 최대 20㎝ 인식거리를 실현하였다. We have proposed a UHF/HF multi-band RFID reader, and have implemented it into a system in a package(SiP). The proposed SiP RFID reader has been designed to support both for EPCgloabal Class1 Generation2 protocol of UHF band, and 13.56㎒ RFID protocols of ISO14443 A/B type, and ISO15693 standards. The operating mode is controlled by embedded RISC core, and the mode can be selected by users. The area of implemented SiP is 40㎜ × 40㎜ with 4 metal layers. The implemented reader SiP operates at single supply voltage of 3.3V. The maximum current consumption is 210㎃. The operating distances are 5㎝ for 13.56㎒ modes, and 20㎝ for UHF mode.
Mobile WiMAX 시스템에서 미세 주파수 동기화 기법의 성능 분석
양현(Hyun Yang),정광수(Kwang-Soo Jeong),이경일(Kyeong-Il Lee),이재훈(Jae-Hoon Yi),유영환(Young-Hwan You) 한국통신학회 2008 韓國通信學會論文誌 Vol.33 No.8A
OFDM (orthogonal frequency division multiplexing) 시스템에서 주파수 동기 오차는 시변 특성으로 인해 시스템 성능 저하를 유발하는 가장 중요한 문제 중의 하나이다. 본 논문에서는 OFDM 기반의 이동 WiMAX 시스템에서 파일럿 심벌 기반의 미세 잔여 주파수 동기 오차 추정기의 성능을 분석한다. FFT 과정 후 수행되는 파일럿 기반의 미세 주파수 동기 오차 추정기의 MSE (mean square error) 성능을 시변 페이딩 채널에서 수식적으로 유도한다. 본 논문에서 유도된 MSE 성능 검증을 위하여 미세 주파수 동기화 기법을 IEEE802.16e 표준의 프레임구조에 적용하여 모의실험을 수행한다. Carrier frequency offset (CFO) is one of the most important problems in an orthogonal frequency division multiplexing (OFDM) system, which seriously degrades the performance of the systems due to its time-variant behavior. In this paper, the performance of a pilot-assisted fine CFO estimator in OFDM-based mobile WiMAX systems is analyzed. Analytical closed-form expression of the mean square error (MSE) of the post-FFT based CFO synchronization scheme is reported for time-variant fading channels. Taking into account the frame structure of the IEEE802.16e standard, simulation results are used to verify the theoretical analysis developed in this paper.