http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이상섭,홍성엽 한국강구조학회 2022 韓國鋼構造學會 論文集 Vol.34 No.4
It is true that the performance evaluation is theoretically difficult because the behavior of the inter-module connection on lateral force depends on the diaphragm action and the stiffness of the beam-column connection. However, it is necessary to develop a fragility function for the performance-based seismic design of modular buildings. the fragility function should be able to calculate the probability of exceeding several damage levels at a specified demand level. In this study, 137 damage data from 46 test results of 11 previous research were classified into 4 damage states and the drift ratio was selected as the demand parameter. The damage state 1, 2, 3 and 4 were defined by the cosmetic(elastic deformation and peeling of paint), the slight(local buckling of beams and microcracks in welds), the moderate(beam failure and weld failure) and the complete(destruction of structural elements) structural damage, respectively. The fragility function, lognormal cumulative distribution function, of the inter-module connection was presented as the value of median and dispersion. Also, the fit of the lognormal distribution in the damage data was reviewed through the Lilliefors test and the Kolmogorov-Smirnov test. 횡력에 대한 모듈 간 접합부 거동은 격막 작용과 보-기둥 접합의 강성에 따라 달라지기 때문에 이론적으로 성능 평가가 어려운 것이 사실이다. 그러나 모듈러 건축물의 성능기반 내진설계를 위해 특정 요구량 수준에서 여러 손상수준을 넘어설 확률을 계산할수 있는 취약도 함수의 개발이 필요하다. 이 연구에서는 국내외에서 수집된 11건의 논문과 보고서에서 얻은 46개 실험으로부터 137개의 손상 데이터를 4가지 손상상태로 구분하였고, 층간변위비를 요구량 모수로 선정하였다. 손상상태 1은 미관 손상: 탄성변형 및 페인트 박리, 손상상태 2는 약한 손상: 보 국부좌굴 및 용접부 미세 균열, 손상상태 3은 중간 손상: 보 파단 및 용접부 파단, 손상상태 4는 심각손상: 구조 요소의 완파로 구분되었다. 모듈 간 접합부의 취약도 함수는 로그정규분포 누적분포함수로서 중앙값과 분산을 제시하였고, Lilliefors 검정과 Kolmogorov-Smirnov 검정을 통해 손상 데이터의 로그정규분포의 적합도를 검토하였다.
이상섭,이창헌,즈엉 짱 안,웬 호앙 티엔 코이,한형수,이재신,Lee, Sang Sub,Lee, Chang-Heon,Duong, Trang An,Nguyen, Hoang Thien Khoi,Han, Hyoung-Su,Lee, Jae-Shin 한국전기전자재료학회 2021 전기전자재료학회논문지 Vol.34 No.1
This study investigated the structural, dielectric, ferroelectric, and strain properties of (0.98-x)Bi1/2Na1/2TiO3-0.02BiFeO3-xSrTiO3 (BNT-BF-100xST, x=0.20, 0.22, 0.24, 0.26, and 0.28). All samples were successfully synthesized using the conventional solid-state reaction method and sintered at 1,175℃ for 2 h. The average grain size of the BNT-BF-100x ceramics decreased with increasing ST content. Furthermore, we observed that the ferroelectric- relaxor transition temperature (TF-R) decreased with increasing ST content, which eventually vanished in the BNT-BF-24ST ceramics. The results indicated that a ferroelectric to relaxor phase transition could be induced by ST modification. Consequently, a large electromechanical strain of 633 pm/V at 4 kV/mm was observed for the BNT-BF-26ST ceramics. These results imply that our materials have the competitive advantage of larger strain under lower operating field conditions compared with other BNT-based lead-free piezoelectric ceramics. We expect that BNT-BF-ST lead-free piezoelectric ceramics are promising candidates as a novel ternary BNT-based system and can find potential applications in actuators.
다이아프램으로 보강된 모듈러 철골조 각형강관 기둥-ㄷ형강 보 접합부의 거동에 관한 연구
이상섭,박금성,홍성엽 청운대학교 건설환경연구소 2015 청운대학교 건설환경연구소 논문집 Vol.10 No.2
Lateral stability is becoming more and more important as the modular construction extends to mid-rise and high-rise building. In Japan, connections in the modular unit are made strong using internal diaphragm or external one to prepare for earthquakes and they can be full strength rigid joints. To develop the modules to be used in taller modular building, two different types of diaphragms installed in the connection between hollow square section column and C-shaped section beam were tested. The effects of diaphragm on strength and flexural stiffness of column are analyzed in this paper. 저층에 적용되어 왔던 모듈러 건축은 고층화하는 추세로 횡력에 대한 안전성이 강조되고 있다. 일본의 경우 지진에 대비하기 위해 모듈의 기둥-보 접합부를 보다 강하게 구성하고 있다. 외력에 의해 모듈의 기둥과 보 부재는 변형을 하더라도 접합부의 상대 회전을 최소화하기 위해 다이아프램을 설치하는 사례가 많다. 이 연구에서는 중․고층 모듈러 건축에 적합한 모듈을 개발하기 위해 각형강관 기둥과 ㄷ형강 보로 구성된 접합부를 내부 다이아프램과 외부 다이아프램으로 보강했을 때 내력과 휨강성 등의 개선 효과를 평가하기 위해 실험을 실시하였고 이 효과를 분석하였다.
자기인식에 대한 아우구스티누스와 토마스 아퀴나스의 이론비교
이상섭 범한철학회 2007 汎韓哲學 Vol.45 No.2
Selbsterkenntnis bei Augustinus und Thomas von AquinSangsup Lee 문】인식론의 문제에 있어서 아우구스티누스와 토마스 간의 차이를 강조하는 것이 일반적이다. 그러나 두 사상가는 차이 못지않게 근본적인 일치를 보이기도 한다. 자기인식의 주체가 되는 인간의 이해에 있어서 아우구스티누스는 정신 자체인 ‘내적인간’을 참된 인간으로 보는 반면 토마스는 인간을 정신과 신체의 실체적 통일체로 파악한다는 점에서 큰 차이를 드러낸다. 그러나 토마스 역시 자기인식의 문제를 정신의 자기관계의 문제로 환원하고 있다는 점에서 아우구스티누스에 동의한다. 보다 근본적으로 아우구스티누스와 토마스는 모두 반성적이고 의식적인 자기 자신에 대한 인식의 가능조건으로서 그것에 선행하는 전반성적이고 전의식적인 자기인식을 인정한다. 그러나 의식적이고 반성적인 차원에서의 자기인식의 성취와 관련해서 두 사람은 차이를 보이며 여기에서 두 사람의 인식론이 갈라지게 된다. 아우구스티누스는 타자의 매개를 통하지 않고 정신의 자기현전과 자기 확실성으로부터 직접 정신의 본질적인 규정성을 이끌어낸다. 반면에 토마스는 직접적인 자기현전은 의식적인 차원의 자기인식의 가능조건일 뿐 결코 충분한 조건은 아니라고 생각한다. 이 점에 있어서 토마스는 아우구스티누스보다는 아리스토텔레스의 인식론을 따른다. 그러나 토마스의 아리스토텔레스 수용은 결코 아우구스티누스의 배제를 동반하지 않는다.