http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
나노 부유 게이트 메모리 소자 응용을 위한 실리콘 나노-바늘 구조에 관한 연구
정성욱,유진수,김영국,김경해,이준신,Jung, Sung-Wook,Yoo, Jin-Su,Kim, Young-Kuk,Kim, Kyung-Hae,Yi, Jun-Sin 한국전기전자재료학회 2005 전기전자재료학회논문지 Vol.18 No.12
In this work, nano-needle structures ate formed to solve problem, related to low density of quantum dots for nano floating gate memory. Such structures ate fabricated and electrical properties' of MIS devices fabricated on the nano-structures are studied. Nano floating gate memory based on quantum dot technologies Is a promising candidate for future non-volatile memory devices. Nano-structure is fabricated by reactive ion etching using $SF_6$ and $O_2$ gases in parallel RF plasma reactor. Surface morphology was investigated after etching using scanning electron microscopy Uniform and packed deep nano-needle structure is established under optimized condition. Photoluminescence and capacitance-voltage characteristics were measured in $Al/SiO_2/Si$ with nano-needle structure of silicon. we have demonstrated that the nano-needle structure can be applicable to non-volatile memory device with increased charge storage capacity over planar structures.
JAUS표준 기반의 모바일 로봇 원격제어 시스템 구현에 관한 연구
정성욱,조상현,김태효,박영석,Jung, Sung-Uk,Cho, Sang-Hyun,Kim, Tae-Hyu,Park, Young-Seak 한국융합신호처리학회 2008 융합신호처리학회 논문지 (JISPS) Vol.9 No.3
최근 국내외에서 무인 자동차용 로봇 개발에 관한 많은 관심과 개발 경쟁이 한층 더해가고 있다. 그러나 무인 자동차용 로봇을 효과적으로 제어하기 위한 표준화된 아키텍쳐의 부재로 개발 기간의 장기화 되고, 다른 무인 자동차용 로봇과 호환성이 저하되는 어려움이 많았다. 따라서 본 논문에서는 무인 자동차용 로봇 표준 아키텍쳐인 JAUS 기반으로 모바일 로봇을 원격 제어하는 시스템을 구현하였다. 구현된 모바일 로봇은 무선 LAN UDP/IP 프로토콜 기반으로 JAUS 명령 메시지를 사용해서 원격제어시스템과 통신한다. 본 연구의 유효성은 구현 로봇의 주행 및 장애물인식 성능에 대한 실험적 결과를 통해 보여진다. Recently, lots of interest and competition in developments related to the autonomous-vehicle robot are being further increased. However, the absence of the standard architectures for effectively controlling the autonomous-vehicle robot led to many difficulties such as the long duration of development and the uncompatibility with other autonomous-vehicle robots. Accordingly, we implemented a mobile autonomous-vehicle robot system based on JAUS standard architecture. The mobile robot communicates with the remote-control system by using wireless LAN UDP/IP JAUS command massages. Its effectiveness is showed through the experimental results related to the navigation of implemented robot.
정성욱(Sung Wook Jung),양홍석(Hongsuk Yang),김수욱(Soo Wook Kim) 한국경영과학회 2012 韓國經營科學會誌 Vol.37 No.4
In recent years, service delivery systems employing a self-service approach have been rapidly spreading. Since a self-service system provides a lower product price, it attracts more customers. However, some system managers are still hesitant to accept a self-service system, because there is no systematic model to predict its performance. Therefore, this research attempts to provide a systematic and quantitative model to predict the performance of a self-service system, focused specifically on a self-service gas station. Under this model, the traditional queuing theory was adopted to describe the general self-service process, but it is also assumed that some changes occur in both the customer arrival rate and the service performance rate. In particular, the price elasticity was introduced to capture the change in the customer arrival rate, and the existence of learning effect and helpers were assumed to design the changed service performance rate. Under these assumptions, a simulation model for a self-service gas station is established, and three performance measurements, such as average number of customers, average waiting time, and Utilization are observed, depending on the changes in price difference and helper-operating time. In this research, the optimal operation strategy for price differentiation and helper-operating time is proposed in accordance with the level of the customer learning rate. Although this research confines the scope of the study to the self-service gas station model, the results of this research can be applied to any type of self-service system.
정성욱(Sung-Uk Jung),박상헌(Sangheon Park),조현우(Hyunwoo Cho),김희권(Hee-Kwon Kim) 한국통신학회 2021 한국통신학회 학술대회논문집 Vol.2021 No.11
자율주행 차랑에서의 증강현실 기술은 차량 운행, 정보 전달, 주행 안전과 관련해서 필요한 기술 중의 하나이다. 기존의 증강현실 가이드 서비스들은 도로의 2차원 위치정보를 활용하여 부가 정보를 이미지 기반으로 오버레이하는 방법으로 단순 정보전달은 가능하나 탑승자와 주변 환경과의 상호작용 및 실객체의 가림 현상을 처리하는데 있어서 제약이 있었다. 이를 극복하기 위해서, 본 논문에서는 투명 디스플레이 기반의 AR 실감가이드 제공 방법을 제안한다. 터치가 가능한 투명 디스플레이기반으로 정확한 위치의 공간에 가상 객체를 배치하기 위한 3D 공간 맵을 구축, 인터랙티브 증강현실 콘텐츠 설계, 그리고, 차량 자세에 따른 공간 반응형 콘텐츠를 개발하였다. 자율주행 차량 내에 투명 디스플레이를 설치하고, 차량 및 공간정보를 연동하여, 개발된 시스템을 실증하였다.
정성욱(Jung, Sung-wook) 불교학연구회 2013 불교학연구 Vol.36 No.-
현대 한국불교의 사상은 『金剛經』을 중심으로 하고 있다고 해도 과언이 아니겠지만,불교역사에 있어서도 수많은 판본과 주석서가 그 중요성을 말해준다. 그러나 수많은 주석서들은 지나치게 현학적으로 기술되어 있거나 格外道理를 강조하다 보니 본문의 흐름이나 표현방식을 간과하고 있다. 이에 본고는 『금강경』 본문의 표현방식의 변화를 살피면서 본문을 좀 더 명확하게 분석하고자 하였다. 여기서는 구마라습역을 중심으로 하고 전재성과 각묵역을 참조하여 본문 분석의 기초를 삼았다. 그리고 『금강경』을 한역하면서 상하로 구분하거나 두 부분으로 구분한 학자들도 있지만 구분의 필연성보다 편의적 기준으로 나누어져 있었다. 그래서 본고는 卽非的 話法과 卽非是名的 話法을 분류의 기준으로 삼아 『금강경 』 본문을 두 부분으로 나누어 보았더니 전반부는 주로 즉비적 화법으로 표현되어 있었고 후반부는 즉비시명적 화법으로 이루어져 있음을 발견하였다. 이에 본고는 즉비적 화법과 즉비시명적 화법의 차이점을 분석하여 보임으로써 『금강경』후반부의 표현방식이 전반부의 표현방식과 배치되는 입장에 있다는 결론에 도달하였다. It is commonly recognized that contemporary Korean Buddhist thought is largely based on the Diamond Sutra [金剛經]. A considerable number of printings and commentaries attest to the importance of the Diamond Sutra in the history of Buddhism. However, many such commentaries are often written in a pedantic manner and ignore the original text's flow or mode of expression, by emphasizing supramundane principles outside the realm of ordinary conceptual thought [格外道理]. Therefore, this study attempts to analyze the Diamond Sutra [金剛經] more clearly by examining the changes in its mode of expression. In this essay, the analysis of the original text is mostly based on the commentary of Kumārajīva (鳩摩羅什: 344-413), with references to Jae-Seong Cheon's (金在星:2003) and Gakmuk's (覺黙:2001) translation. Though some scholars divided the Diamond Sutra [金剛經] into two parts when translating into Chinese, this was not due to inevitability but due to convenience. Therefore, this study attempts to divide the Sutra into two parts, classifying it as ‘Just-not Speech’ [卽非的 話法] and ‘Just-not but-named Speech’ [卽非是名的 話法]. I find that the former was mostly composed of ‘Just-not Speech’ [卽非的 話法] and the latter ‘Just-not but-named Speech’ [卽非是名的 話法]. Through the analysis of the difference between the two, this essay concludes that the Sutra's mode of expression in the two parts conflict with each other.