http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
전세호(Se-ho Jun),최은미(Eunmi Choi) 한국멀티미디어학회 2009 한국멀티미디어학회 학술발표논문집 Vol.2009 No.2
본 논문에서는 TTA에서 정의한 메타데이터 레지스트리 구축을 위한 프레임워크로의 구성요소의 메타데이터 수집, 데이터 분류, 데이터 요소 인증 및 표준화, 데이터 가공, 데이터 요소 품질 관리, 분산질의 처리, 사용자 권한 처리 메커니즘을 분석하였으며 AJAX을 이용하여 메타데이터 레지스트리 시스템을 구축하여 누구나 원하는 사람들은 자신의 웹 페이지에 추가 하여 사용할 수 있는 메타데이터 레지스트리 시스템을 제공하고 연구하였다.
박수길,박종은,정승준,엄재석,전세호,이주성,Park Soo-Gil,Park Jong-Eun,Jung Seung-Jun,Yum Jae-Suk,Jun Sae-ho,Lee Ju-Seong 한국전기화학회 1999 한국전기화학회지 Vol.2 No.3
최근 large scale integrated circuits(LSI) 및 printed circuit board(PCB)의 세밀화가 전자기기의 소형화로 인하여 필수 불가결하게 되었다. 전해 도금은 LSI및 PCB의 전도도 및 부식저항을 향상시키기 위해서 전도성 라인의 말단에 적용되고 있다. 그러나 회로 기판의 소형화 및 고직접화로 인하여 적용되지 못하고 있다. 따라서 최근 무전해 도금은 복잡한 장치와 외부에서 전원을 필요치 않는 작동의 간편함 때문에 매우 각광 받고 있는 방법 중의 하나이다. 본 연구는 무전해 니켈/금도금의 도금 기술 개발을 위해 시험하였다. 무전해 니켈 도금은 $85^{\circ}C$의 도금 욕에서 PCB기판 위에 침적 시켰고 그 다음 금층은 동일한 방법으로 $90^{\circ}C$에서 니켈 층위에 침적 시켰다. Bonderbility는 무전해 니켈/금도금의 안정성을 평가하기 위해 gold wire 또는 solder ball 테스트로 실험하였다. Recently, miniaturization of large scale integrated circuits (LSI) and printed circuit board (PCB) have become essential with the downsizing of electronic devices. Gold electroplating is applied of conductivity wiring or terminals for improvement of conductivity and corrosion resistance. However, electroplating is not applicable since the circuits are becoming finer and denser. Accordingly, electroless plating is recently highly attractive method because of the simplicity of the operation requiring no external source of current and no elaborate equipment. In this work, we tried to develop a plating technique on electroless Ni/Au plating. First, the electroless Ni plating was deposited on the PCB with agitation in the bath at $85^{\circ}C$. Then the Au layer was deposited on the Ni layer surface by same method at $90^{\circ}C$. The bonderability were tested in order to evaluate the stability of the electroless Ni/Au by gold wire or solder ball test.
Gasoline과 연료첨가제(Cenox)의 자연발화에 관한 연구
최재욱,목연수,임우섭,최일곤,전세호,민철웅 한국화재소방학회 2006 한국화재소방학회논문지 Vol.20 No.1
The spontaneous ignition of a flammable matter is a crucial factor for the prevention of a fire. The minimum ignition temperatures of Gasoline and Cenox in 1000ml of a sample were determined to be 340.5oC and 368.5oC respectively. In addition when the time taken for ignition was 1.0 sec, the instantaneous ignition temperatures were 416oC and 427oC respectively. Moreover, the changes in the minimum ignition temperature were small when less than 60 v/v% of Cenox was added, but the changes were great when 80 v/v% or more was added. Therefore, it is hypothesized that, when used as a fuel in the Gasoline engine, the ratio of the mixture of Cenox and Gasoline will be a very important factor. 가연성 물질의 자연발화는 화재예방을 위한 중요한 인자가 된다. Gasoline과 Cenox의 최저발화온도는 시료량 100ml서 각각 340.5oC, 368.5oC를 구하였다. 또한 순간발화온도는 발화되는 시간이 1.0 sec가 되 는 온도인 416oC, 427oC를 구하였다. 혼합물질에 대한 시료량과 최저발화온도는 Cenox 60v/v% 이하 첨가시 최저발화온도의 변화는 적게 나타났으나, 80 v/v% 이상에서는 높게 나타났다. 따라서 가솔린 엔진 의 연료로 사용시 Gasoline과 Cenox의 혼합비가 대단히 중요한 인자가 될 것으로 사료된다.
박수길,이주성,손원근,김종진,엄재석,전세호,이홍기 한국공업화학회 1998 응용화학 Vol.2 No.2
A new treatment of LiV₃O_8 has been proposed for improving its electrochemical behavior as a cathode material for secondary lithium batteries. Lithium trivanadate, LiV₃O_8, can be prepared in a finely dispersed form by dehydration of aqueous lithium trivanadate gels. The ultrasonic treated LiV₃O_8 can improve not only the specific capacity, but also the electrical conductivity.