http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이지훈,박정진,최준호,신동훈,박관하,Lee, Ji-Hoon,Park, Jung-Jin,Choi, Jun-Ho,Shin, Dong-Hun,Park, Kwan Ha 한국어병학회 2017 한국어병학회지 Vol.30 No.2
본 연구에서는 넙치 (Paralichthys olivaceus)에게 감염 및 높은 폐사율을 일으켜 해산어류양식에서 심각한 문제가 되고 있는 스쿠티카충 (Miamiensis avidus) 구제를 위한 과산화수소의 유효성을 평가하였다. In vitro시험 결과, 과산화수소 50 mg/l로 1시간 동안 노출시키면 완벽하게 스쿠티카충 (M. avidus)을 효과적으로 살상하였다. In vivo시험은 $2{\times}10^3M.\; avidus/ml$로 이틀간 침지감염을 유도한 넙치와 제주지역에서 자연적으로 스쿠티카충에 감염된 넙치를 대상으로 과산화수소의 효능을 평가하였다. 제주지역 양식장 및 실험실적 시험군에서 과산화수소 100-200 mg/l로 1시간 동안 약욕시 대조군에 비해 현저히 누적폐사가 감소하였다 (p<0.05). 이때 넙치 조직에서 충밀도 측정 결과 약욕 후 3일 동안 대조군에 비해 감소가 나타났다. 따라서 수산용 과산화수소는 스쿠티카충의 초기 구제 효과가 유효한 것으로 확인하였다. We evaluated the anti-parasitic efficacy of hydrogen peroxide against a scuticociliate Miamiensis avidus in olive flounder Paralichthys olivaceus. In vitro tests showed that hydrogen peroxide above 50 mg/l is effective for killing M. avidus. In vivo effects were assessed in olive flounder after immersion infection with $2.8{\times}10^3M.\;avidus/ml$ for 2 days, and in naturally infected fish obtained from Jeju area farms. Bathing treatment with 100 and 200 mg/l hydrogen peroxide showed markedly higher survival rates of olive flounder than control groups (p<0.05). The number of live M. avidus in fish tissues were reduced for 3 days in naturally-infected fish after a single bath. In conclusion, hydrogen peroxide can be a good therapeutant particularly in the early stage of M. avidus infection.
FBG센서를 이용한 다수의 하중이 작용하는 단순 철골보의 변형률 분포 추정
이지훈,최세운,박효선 한국구조물진단유지관리학회 2011 한국구조물진단학회 학술발표회논문집 Vol.2011 No.9
FBG sensors have a high potential to be good alternatives among various type of sensors used in structural health monitoring. However it is difficult to estimate overall strains or stresses in member and structure due to the limitation of characteristic of FBG sensor which is one type of point sensors. For this reason, this paper introduces a mathematical procedure to make it possible to know the state of strain distribution using FBG sensor measurement on arbitrary position of simply supported steel beam. And introduced procedure is expanded from the case of simply supported steel beam subjected to one load to combined loads.
인산염계 기능성 단량체가 첨가된 수종의 자가 접착 레진시멘트와 지르코니아 세라믹 사이 열순환 전후 전단결합강도 비교
이지훈,김민경,이정진,안승근,박주미,서재민,Lee, Ji-Hun,Kim, Min-Kyung,Lee, Jung-Jin,Ahn, Seung-Geun,Park, Ju-Mi,Seo, Jae-Min 대한치과보철학회 2015 대한치과보철학회지 Vol.53 No.4
목적: 본 연구에서는 서로 다른 인산염계 기능성 단량체가 첨가된 5종의 자가 접착 레진시멘트와 지르코니아 사이의 열순환 전후 전단결합강도를 비교 평가하고자 하였다. 재료 및 방법: Airborne particle abrasion ($50{\mu}m$ $Al_2O_3$)을 시행한 디스크 모양의 Y-TZP 지르코니아 블록을 총 100개 준비하였다. 그리고 composite resin cylinder ($Filtek^{TM}$ Z250, 3M ESPE, St. Paul, MN, USA) 100개를 준비하였다. 서로 다른 인산염계 기능성 단량체가 첨가된 5종의 이중 중합형 자가 접착 레진시멘트 즉, Permacem 2.0 (DMG, Hamburg, Germany), $Clearfil^{TM}$ SA Luting (Kuraray Medical, Tokyo, Japan), $Multilink^{(R)}$ Speed (Ivoclar Vivadent, Schaan, Liechtenstein), $RelyX^{TM}$ U200 Automix (3M ESPE, Neuss, Germany), G-Cem $LinkAce^{TM}$ (GC Corporation, Tokyo, Japan)를 이용하여 지르코니아 블록과 composite resin cylinder를 접착하고 1군당 20개의 시편을 갖는 5개의 군을 만들었다. 시편을 $37^{\circ}C$ 의 증류수에 24시간 동안 보관한 후 각 군의 시편 절반(n=10)은 곧 바로 그리고 나머지 절반(n=10)은 5000회 열순환(5 - $55^{\circ}C$) 후에 전단결합강도를 측정하였다. 파절면은 FE-SEM을 이용하여 관찰하였다. 통계분석은 레진시멘트 종류 및 열순환 유무에 따른 전단결합강도의 비교를 위해 Two/One-way ANOVA를 시행하고 Tukey HSD post-hoc test를 이용하여 사후 검정하였으며, 열순환 전후의 비교를 위해 paired t-test를 이용하였다($\alpha$=.05). 결과: 열순환 전과 후 모두 $Multilink^{(R)}$ Speed 군은 나머지 4종류의 시멘트 군 보다 큰 전단결합강도를 나타내었다. G-Cem $LinkAce^{TM}$ 군은 열순환 전과 비교하여 열순환 후에 유의하게 낮은 전단결합강도를 나타내었지만, 다른 4종류 군은 열순환 전후 유의한 차이가 없었다. 결론: 인산염계 단량체를 포함한 대부분의 이중 중합형 자가 접착 레진시멘트는 지르코니아와 높은 전단결합강도를 보이고 열순환에 의해 유의한 영향을 받지 않아 지르코니아 보철물의 접착에 유용할 것이라고 사료된다. Purpose: This study compared shear bond strengths of five self-adhesive cements with phosphate monomer to zirconium oxide ceramic with and without airborn particle abrasion. Materials and methods: One hundred zirconia samples were air-abraded ($50{\mu}mAl_2O_3$). One hundred composite resin cylinders were fabricated. Composite cylinders were bonded to the zirconia samples with either Permacem 2.0 (P), $Clearfil^{TM}$ SA Luting (C), $Multilink^{(R)}$ Speed (M), $RelyX^{TM}$ U200 Automix (R), G-Cem $LinkAce^{TM}$ (G). All bonded specimens were stored in distilled water ($37^{\circ}C$) for 24 h and half of them were additionally aged by thermocycling ($5^{\circ}C$, $55^{\circ}C$, 5,000 times). The bonded specimens were loaded in shear force until fracture (1 mm/min) by using Universal Testing Machine (Model 4201, Instron Co, Canton, MA, USA). The failure sites were inspected under field-emission scanning electron microscopy. The data was analyzed with ANOVA, Tukey HSD post-hoc test and paired samples t-test ($\alpha$=.05). Results: Before and after thermocycling, $Multilink^{(R)}$ Speed (M) revealed higher shear-bond strength than the other cements. G-Cem $LinkAce^{TM}$ (G) showed significantly lower bond strengths after thermocycling than before treatment (P<.05), but the other groups were not significantly different (P>.05). Conclusion: Most self-adhesive cements with phosphate monomer showed high shear bond strength with zirconia ceramic and weren't influenced by thermocycling, so they seem to valuable to zirconia ceramic bonding.