비름(Amaranth)과 명아주(Quinoa) 재배종의 기능성 물질과 변이

이재학,김기준,이정일,이승택,류수노,Lee, Jae-Hak,Kim, Ki-Jun,Lee, Jung-Il,Lee, Seung-Tack,Ryu, Su-Noh 한국작물학회 1996 Korean journal of crop science Vol.41 No.S

Amaranth(Amaranthus spp. L.) and quinoa (Chenpodium quinoa Willd.) are old crops from South, Central America and Central Asia and their grains have been identified as very promising food crops because of their exceptional nutritive value. Squalene is an important ingredient in skin cosmetics and computer disc lubricants as well as bioactive materials such as inhibition of fungal and mammalian sterol biosynthesis, antitumor, anticancer, and immunomodulation. Amaranth has a component called squalene (2,6,10,15,19,23-hexamethyl-2,6,10,14,22-tetraco-sahexaene) about 1/300 of the seed and $5\~8\%$ of its seed oil. Oil and squalene content in amaranth seed were different for the species investigated. Squalene content in seed oil also increased by $15.5\%$ due to puffing and from 6.96 to $8.01\%$ by refining and bleaching. Saponin concentrations in quinoa seed ranged 0.01 to $5.6\%$. Saponins are located in the outer layers of quinoa grain. These layers include the perianth, pericarp, a seed coat layer, and a cuticle like structure. Oleanane-type triterpenes saponins are of great interest because of their diverse pharmacological properties, for instance, anti-inflammatory, antibiotic, contraceptive, and cholesterol-lowering effects. It is known that quinoa contains a number of structurally diverse saponins including the aglycones, oleanolic acid, hederagenin, and phytolaccagenic acid, which are new potential in gredient for pharmacological properties. It is likely that these saponin levels will be considerably affected by genetic, agronomic and environmental factors as well as by processing. With the current enhanced public interest in health and nutrition amaranth and quinoa will most likely remain in the immediate future within the realm of exotic health foods until such time as agricultural production meets the quantities and qualify required by industrial food manufacturers.

식물성 스쿠알렌의 분리 및 분석

이재학,Lee Jae-Hak 한국작물학회 2004 한국작물학회지 Vol.49 No.suppl1

조석 모델링에서 adjoint 방법 적용시 적정 가중치 산정

이재학,박경,송용식,Lee, Jae-Hak,Park, Kyeong,Song, Yong-Sik 한국해양학회 2000 바다 Vol.5 No.3

자료동화기법의 하나인 adjoint 방법은 제약조건으로서 모델의 기본방정식을 만족시키는 동시에 모델 결과와 관측자료 차이의 함수인 비용함수의 크기를 최소화시키는 모델변수를 찾아냄으로서 모델 결과를 향상시키는 기법이다. 본 연구에서는 수평방향 2차원 선형 조석모델과 adjoint 모델로 구성된 adjoint 꾸러미를 수립하고, 이를 임의로 설정한 직사각형 모델영역에 적용하였다. 조석모델로부터의 조위 모델 결과를 관측자료로 삼아 개방경계조건인 조위의 진폭을 역 추정하는 수치실험을 실시하여 자료 가중치에 대한 반응, 모델변수 초기 추정치의 중요성 및 지형 변화에 대한 반응 등을 살펴보았다 특히, adjoint꾸러미 적용시 대부분 경험적으로 설정되어왔던 가중치의 선정방법을 제시하였다. The adjoint method is a method of data assimilation to improve the model results by seeking for model parameters that minimize the cost function and satisfy the governing equations of a model simultaneously. An adjoint package was set up for the two-dimensional linear tidal model and was applied to an idealized domain for an optimal estimation of the open boundary conditions. The assimilating data were selected from the results of forward modeling. Attention is paid on the response of the adjoint package to weighting parameters, the importance of initial estimates of model parameters and the applicability of the adjoint package to the case with varying depth. A procedure to determine optimal weight is presented based on the relationships between weights and other factors.

치과 임플란트 수술 계획시 CT를 이용한 상악동 체적 및 치조골량 측정

이재학,한원정,최영희,김은경,Lee Jae-Hak,Han Won-Jeong,Choi Young Hi,Kim Eun-Kyung 대한영상치의학회 2003 Imaging Science in Dentistry Vol.33 No.1

Purpose: To aid in determining the volume of graft bone required before a maxillary sinus lift procedure and compare the alveolar bone height measurements taken by panoramic radiographs to those by CT images. Materials and Methods : Data obtained by both panoramic radiographs and CT examination of 25 patients were used in this study. Maxillary sinus volumes from the antral floor to heights of 5 mm, 10 mm, 15 mm, and 20 mm, were calculated. Alveolar bone height was measured on the panoramic images at each maxillary tooth site and corrected by magnification rate (PBH). Available bone height (ABH) and full bone height (FBH) was measured on reconstructed CT images. PBH was compared with ABH and FBH at the maxillary incisors, canines, premolars, and molars. Results: Volumes of the inferior portion of the sinuses were 0.55 ± 0041 ㎤ for 5 mm lifts, 2.11 ± 0.68 ㎤ for 10 mm, 4.26 ± 1.32 ㎤ for 15 mm, 6.95 ± 2.01 ㎤ for 20 mm. For the alveolar bone measurement, measurements by panoramic images were longer than available bone heights determined by CT images at the incisor and canine areas, and shorter than full bone heights on CT images at incisor, premolar, and molar areas (p<0.001). Conclusion: In bone grafting of the maxillary sinus floor, 0.96 ㎤ or more is required for a 5 mm-lift, 2.79 ㎤ or more for a 10 mm-lift, 5.58 ㎤ or more for a 15 mm-lift, and 8.96 ㎤ or more for a 20 mm-lift. Maxillary implant length determined using panoramic radiograph alone could result in underestimation or overestimation, according to the site involved.

Spin-on Glass를 이용한 실리콘과 유리의 저온 접합 공정

이재학,유중돈,Lee Jae-Hak,Yoo Choong-Don 대한용접접합학회 2005 대한용접·접합학회지 Vol.23 No.6

Low temperature bonding of the silicon and glass using the Spin-on Glass (SOG) has been conducted experimentally to figure out the effects of the SOG solution composition and process variables on bond strength using the Design of Experiment method. In order to achieve the high quality bond interface without rack, sufficient reaction time of the optimal SOG solution composition is needed along with proper pressure and annealing temperature. The shear strength under the optimal SOG solution composition and process condition was higher than that of conventional anodic bonding and similar to that of wafer direct bonding.

유방암의 예방 및 치료법

이재학,Lee, Jae-Hak 한국건강관리협회 1996 건강소식 Vol.20 No.6

해양음향 토모그래피와 역문제

이재학,김재수,Lee, Jae-Hak,Kim, Jae-Su 한국음향학회 1994 韓國音響學會誌 Vol.13 No.4

디지털제어방식을 이용한 자동차용 고압방전등 안정기의 조광제어

이재학,김윤호,Lee, Jae-Hak,Kim, Yoon-Ho 한국조명전기설비학회 2005 조명·전기설비학회논문지 Vol.19 No.1

본 논문은 디지털제어방식을 이용한 자동차용 35[W]급 메탈핼라이드 램프용 전자식 안정기의 고효율 조광제어 시스템을 구현하였다. 본 논문에서는 밝기, 연색성, 광효율, 수명 등에서 기존의 할로겐 램프에 비해 우수한 특성을 가지고 있지만 복잡한 과도특성을 가지고 있는 메탈핼라이드 램프를 자동차에 적용하기 위해 디지털 제어방식을 전자식 안정기에 적용하여 램프 요구조건 및 주변 환경에 최적으로 적용할 수 있도록 전자식 안정기를 설계하였다. 또한, 주변의 빛의 세기에 따라 램프의 양단전압을 단계별로 가변 제어하는 조광시스템을 구현하여, 운전자에게는 보다 효율적인 운전여건을 만듬과 동시에 한정된 에너지를 가진 밧데리로 운전하는 자동차에서 효율적인 전력제어를 실현하였다. 개발된 안정기에 대한 동작특성을 시뮬레이션과 실험을 통해 확인하였다. This paper presents dimming control system for automotive 35[W] metal halide discharge(MHD) lamp electronic ballast using digital control method. HID system has been becoming increasingly popular due to its superior performance(high luminous efficacy, good color rendering and long life etc.)over the conventional halogen system. However, this lamp demands a highly efficient ballast and very complex control circuitry that can control complex transient state in applying to automotive. Therefore, in this paper, digital control method for the HID lamp ballast is presented for optimal control that can adapt complex transient state, steady state and various environments. In developed dimming system, the system is designed to control the lamp output voltage step by step using microcontroller according to cds sensor. Therefore the designed dimming control system give good driving condition to diver and realize the power control effectively. The results of the proposed system is verified through various simulation results and the experiment results.

'꼬마버스 타요'와 대중교통 마케팅

이재학,김창훈,Lee, Jae-Hak,Kim, Chang-Hun 대한교통학회 2014 교통 기술과 정책 Vol.11 No.3

산부식과 CO₂ 및 Nd:YAG 레이저 조사에 따른 상아질 표면의 변화

이재학,박준상,고명연,Lee, Jae-Hak,Park, June-Sang,Ko, Myung-Yun 대한안면통증구강내과학회 2000 Journal of Oral Medicine and Pain Vol.25 No.1

The purpose of this study was to examine dentin surface changes of extracted sound third molar specimens which were etched with 10% maleic acid and irradiated at $7-140J/cm^2$ with $CO_2$ and at $156-280J/cm^2$ with Nd:YAG laser. The results were as follows. 1. Dentin surfaces etched with 10% maleic acid and then irradiated at below of $42J/cm^2$ with $CO_2$ laser showed the retentive morphology for resin restoration. 2. Dentin surfaces irradiated at below of $42J/cm^2$ with $CO_2$ laser showed the increased acid-resistance. 3. Dentin surfaces irradiated at $218-280J/cm^2$ with Nd:YAG laser showed the retentive morphology. 4. Dentin surfaces irradiated at $218-280J/cm^2$ with Nd:YAG laser and etched 10% maleic acid and then $218-280J/cm^2$ with Nd:YAG laser showed the increased acid-resistance.