http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
이상수,김영화,김광준,Lee, S.S.,Kim, Y.H.,Kim, K.J. 한국전자통신연구원 2006 전자통신동향분석 Vol.21 No.6
BcN 백본망은 데이터 트래픽의 생존성 보장과 다양한 서비스를 유연하게 수용하기 위해 다이내믹하게 운용할 수 있어야 한다. 이와 같은 요구사항을 만족하기 위해 광 스위치를 도입하고, 파장 단위의 경로 설정 및 해제를 자동으로 이루어지도록 하는 ASON개념이 적용된 광 회선 분배 시스템이 개발되고 있다. 최근의 광 회선 분배 기술은ROADM을 중심으로 메트로 망에 도입되고 있으며, 특히 제어평면의 도입에 의해 원격프로비저닝 및 자동 망 구성이 가능하게 되었다. 기술적인 측면에서는 PLC 기반의 광스위치를 채택한 1세대 ROADM 시스템에서 WSS 기반의 광 스위치를 채택한 2세대ROADM으로 이동하고 있으며, 이것이 자연스럽게 PXC로 진화할 것으로 보인다. 경제적인 측면에서는 IPTV 등 새로운 서비스를 지원하기 위하여 대규모 시스템 도입이 본격화되고 있으며, 국내의 경우에도 1-2년 내에 상용화 및 시장 진입이 예상되고 있다. 본 고에서는 이러한 광 회선 분배 기술의 전달평면 및 제어평면 기술과 시장 현황 및 향후 전망에 대하여 알아본다.
이준석,이현석,김종규,이상수,Lee, J.S.,Lee, H.S.,Kim, J.G.,Lee, S.S. 한국터널지하공간학회 2005 터널기술 Vol.7 No.1
사회 전반에 걸친 디지털 혁명에 따라 IT를 기반으로 하는 다양한 정보화 터널시공기법이 개발되고 있으며 터널시공시 의사결정체계의 일환으로 적용되고 있다. 따라서 본 연구에서는 PDA를 이용한 터널시공의 정보화에 대하여 기술하였으며, 특히 시공중 발생하는 각종 막장면 데이터를 실시간으로 입 출력 및 저장하고 이를 기반으로 지보패턴을 결정할 수 있는 의사결정체계를 구축하였다. 이를 위하여 무선 네트워크, 이동식 컴퓨터, CDMA 및 디지털카메라 등 최근 정보통신을 바탕으로 한 막장면 매핑자료의 실시간 데이터 수집 및 해석, 디지털 매핑등이 가능한 PDA용 S/W를 개발하였으며 현장적용에 대하여 고려하였다. 향후에는 실제 시공시 사용된 지보방법 및 소요 지보량을 함께 저장할 수 있는 DB를 구축하는 한편 현장적용을 통한 feedback 결과에 대하여 연구가 지속될 예정이다. Due to fast development of digital equipments, various information techniques have been applied to the tunneling and a decision aid system based on IT has also been used during excavation stage. A PDA based informative tunneling method is, therefore, studied in this paper and the decision aids for tunneling using digital face mapping data as well as geologic information in terms of digital data is developed. For this, wireless network, mobile computer, CDMA and digital camera have been combined to generate the digital map of the tunnel face and reinforcement or excavation pattern can be estimated based on digitalized geologic conditions. Future studies will be concentrated on the enhancement of the PDA S/W so that reinforcement method as well as the amount of reinforcements can also be stored in the same DB. Furthermore, field application of the S/W will be undertaken and a virtual reality technique will also be introduced to visualize all the tunneling work on the computer monitor.
고해상도 수치기법의 경계조건에 따른 공력음향 특성에 관한 연구
이상수(S.S. Lee),김재수(J.S. Kim) 한국전산유체공학회 2009 한국전산유체공학회지 Vol.14 No.3
The present paper focuses on the analysis of aero-acoustics characteristic by appling different four boundary conditions. The high-order and high-resolution numerical schemes are used for discrete accurate computation of compressible flow. The four boundary conditions include extrapolation, characteristic boundary condition, zonal characteristic boundary condition. These boundary conditions are applied to the computation of two dimensional circular cylinder flows with Mach number of 0.3 and Reynolds number of 400. The computation results are validated against measurement data and other computation results for the Strouhal frequency of vortex shedding, the mean drag coefficient and root-mean-square lift for the unsteady periodic flow regime. The characteristics of secondary frequency is predicted by three kinds of boundary conditions.
이상수(S.S. Lee),김재수(J.S. Kim) 한국전산유체공학회 2009 한국전산유체공학회 학술대회논문집 Vol.2009 No.4
The present paper focuses on the analysis of aero-acoustics characteristic by several boundary conditions. In this simulation, a high-order and high-resolution numerical schemes are used for the accurate computation of compressible flow with several boundary conditions including characteristic boundary conditions as well as extrapolation and zonal characteristic boundary condition. These boundary conditions are applied to the computation of two dimensional circular cylinder flows with Mach number of 0.3 and Reynolds number of 400. The computation results are validated witht measurement datum and other computation results for the Strouhal frequency of vortex shedding, the mean drag coefficient and root-mean-square lift for the unsteady periodic flow regime. Secondary frequency is predicted by three kinds of boundary conditions characteristic.
조대 연신 결정립을 가지는 Al5083합금의 부풀림 성형 특성 연구
이상수(S. S. Lee),김지식(J.S.Kim),이영선(Y.S.Lee),권용남(Y- N. Kwon) 한국소성가공학회 2014 한국소성가공학회 학술대회 논문집 Vol.2014 No.5
Blow forming process has been used produce complex shapes with superplastic materials in the aerospace industry. Among superplastic materials, a series of 5000 series aluminum alloys with fine grains have been studied for superplastic blow forming. However, coarse grained has never been tried for the blow forming process. The blow forming characteristics of Al 5083 alloy with the coarse elongated grains were studied in the present study. As the forming pressure gets lowered, more uniform thickness of formed part was attained.