http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
[KCERN 57차 포럼 보고서] 유니콘 비즈니스 모델
유효상,김애선,주강진,윤예지,김예지,신수진,장상필,박귀주 KCERN 2019 포럼보고서 Vol.- No.57
1. 55차 공개포럼의 유니콘 정책에 이어 57차 포럼은 유니콘 비즈니스 모델을 제시하고자 함 2. 글로벌 선도기업과 유니콘 기업의 70%가 O2O 영역에서 탄생하며, 이는 유니콘 기업이 4차 산업혁명의 미래 기업 모델의 전령사임을 의미함 3. 글로벌 유니콘의 비즈니스 패턴은 플랫폼 연결 서비스에서 인공지능 맞춤 서비스를 거쳐 커뮤니티화하는 3C(Communication, Curation, Community)의 구독 서비스로 진화 중임 4. 글로벌 유니콘은 기업의 프로세스를 분해하여 고객 중심으로 재융합하고 있으며, 이는 기업의 존재 이유가 가치사슬이 아닌 고객가치이기 때문임 5. KCERN은 유니콘 비즈니스 모델로 Value-Price-Cost의 3개 컬럼(Column)의 순환 모델인 10 블록 비즈니스 모델과 유니콘 기술 구현 모델로 4단계 스마트 트랜스폼 모델을 제시함 6. 한편 벤처투자자 미팅을 통해 도출한 유니콘 투자 전략은 1) 클럽 딜이 아닌 리딩투자, 2) 확률 전략이 아닌 기댓값 전략, 3) 글로벌 경쟁을 통한 시장화, 4) 기업가정신 리더십 5) 해외판 모태펀드 6) 통제와 관료화 문제 극복 등임 7. 한국의 유니콘 3대 전략에 기반한 3대 유니콘 비즈니스 모델을 제시함 8. 첫 번째, 「카피타이거 전략」으로 유니콘 비즈니스 모델 연구, 카피 타이거 해커톤 개최, 액셀러레이터 네트워크 확산을 제시 9. 두 번째, 「탈 갈라파고스 규제 전략」으로 한국 유니콘 클럽 조직화 및 원스톱 규제창구, 규제 샌드박스 및 테스트베드 적극 활용, 본 글로벌 전략을 제시 10. 세 번째, 「흥 산업 전략」으로 한류와 한품 플랫폼화, 팬덤의 어벤져스 융합, 흥 산업 서비스 규제 개혁을 제시
유효상 한국경영컨설팅학회 2014 경영컨설팅연구 Vol.14 No.4
본 논문은 우리나라의 명품 핸드백 제조업체 사례를 기반으로 기업이 OEM 업체에서 ODM 업체를 거쳐 OBM 업체로 변신하는 과정을 다루고 있다. 87년 작은 명품 핸드백 OEM 업체로 출발한 시몬느는 아시아에 대규모 핸드백 생산 기지를 구축한 ODM 업체로 성장했다. 도나카란 뉴욕 컬렉션, 마크 제이콥스, 마이클 코어스 등 명품 브랜드를 고객사로 둔 시몬느는 핸드백을 기획하는 것은 물론 소재, 스타일, 디자인 등을 개발하고, 생산에서 납품까지 일괄적으로 서비스를 제공하는 풀 서비스 기업(Full Service Company)로 발전했다. 그 결과 시몬느는 연평균 20% 이상 성장하면서 중국, 인도네시아, 베트남에 6개의 생산기지를 갖추고 2만 명 이상의 직원을 보유한 글로벌 강소기업으로 성장하였다. 2000년대 ODM 업체로 성장한 시몬느는 글로벌 생산기지를 기반으로 자체 브랜드를 개발해 본격적인 OBM 업체로 도약하기 위한 다양한 전략을 시도하였다. 시몬느의 성공 사례에서 보듯이, 후발기업이라도 글로벌 고객을 대상으로 한 OEM 경험을 기반으로 자본과 역량을 축적할 수 있었으며, 이렇게 확보한 핵심역량과 선견지명을 가진 기업가를 확보한 중소기업은 OEM 업체에서 OBM 업체로 변신할 수 있었다. This paper investigates firm transformation from original equipment manufacturing (OEM) to original development manufacturing (ODM) to original brand manufacturing (OBM) based on entrepreneurship of Korean top handbag manufacturer. In 1987, Simone started as a small OEM company of luxury handbag and evolved ODM company based on mass production facilities in Asia. Simone's major customers included famous high-end brand holders such as DKNY, Marc Jacobs, Michael Kors etc. Simone became a full service company integrated vertically from development of material, style, and design to production and distribution. As a result, Simone has achieved more than 20% growth of annual sales and has built 6 production base in China, Indonesia, and Vietnam where hired more than 20,000 employees. Recently, Simone pursued various strategies to become OBM company based on their own brand and global manufacturing clusters. Taking the competitive advantage of practicing OEM for multinational corporations, latecomer firms can generate capital and accumulate capabilities by engaging with the global production network. This paper proposes that only entrepreneurs with foresight and core competence are capable to facilitate firm transformation from OEM to OBM.
유효상,김용호,Byoung-Kwon Lee,Eun-Chan Ko,손현택 한국재료학회 2022 한국재료학회지 Vol.32 No.10
This research investigated the effect of Si addition on the microstructure, mechanical properties, electric and thermal conductivity of as-extruded Al 6013 alloys. As the content of Si increased, the area fraction of the second phase increased. As the Si content increased, the average grain size decreased remarkably, from 182 (no Si addition) to 142 (1.5Si), 78 (3.0Si) and 77 μm (4.5Si) due to dynamic recrystallization by the dispersed second particles in the aluminum matrix during the hot extrusion. As the Si content increased, the yield strength and ultimate tensile strength increased. The maximum values of yield strength and ultimate tensile strength were 224 MPa and 103 MPa for the 6013-4.5Si alloy. As the amount of Si added increased, the electrical and thermal conductivity decreased. The electrical and thermal conductivity of the Al6013-4.5Si alloy were 44.0% IACS and 165.0 W/mK, respectively. The addition of Si to Al 6013 alloy had a significant effect on its thermal conductivity and mechanical properties.
TiC 첨가량에 따른 개량된 A6013-3wt.%Si 합금 분말성형체의 미세조직 변화
유효상,김용호,손현택 한국분말재료학회 2022 한국분말재료학회지 (KPMI) Vol.29 No.1
Aluminum-based powders have attracted attention as key materials for 3D printing owing to their low density, high specific strength, high corrosion resistance, and formability. This study describes the effects of TiC addition on the microstructure of the A6013 alloy. The alloy powder was successfully prepared by gas atomization and further densified using an extrusion process. We have carried out energy dispersive X-ray spectrometry (EDS) and electron backscatter diffraction (EBSD) using scanning electron microscopy (SEM) in order to investigate the effect of TiC addition on the microstructure and texture evolution of the A6013 alloy. The atomized A6013-xTiC alloy powder is fine and spherical, with an initial powder size distribution of approximately 73 μm which decreases to 12.5, 13.9, 10.8, and 10.0 μm with increments in the amount of TiC.
알루미늄의 Sb 첨가에 따른 미세조직, 전기전도도 및 기계적 특성 변화
유효상,김용호,이병권,고은찬,이성희,이상찬,손현택 한국재료학회 2022 한국재료학회지 Vol.32 No.11
This research investigated how adding Sb (0.75, 1.0, 2.0 and 5.0 wt%) to as-extruded aluminum alloys affected their microstructure, mechanical properties, electric and thermal conductivity. The addition of Sb resulted in the formation of AlSb intermetallic compounds. It was observed that intermetallic compounds in the alloys were distributed homogenously in the Al matrix. As the content of Sb increased, the area fraction of intermetallic compounds increased. It can be clearly seen that the intermetallic compounds were crushed into fine particles and homogenously arrayed during the extrusion process. As the Sb content increased, the average grain size decreased remarkably from 282.6 μm (0.75 wt%) to 109.2 μm (5.0 wt%) due to dynamic recrystallization by the dispersed intermetallic compounds in the aluminum matrix during the hot extrusion. As the Sb content increased from 0.75 to 2.0 wt%, the electrical conductivity decreased from 61.0 to 59.8 % of the International Annealed Copper Standard. Also, as the Sb content increased from 0.75 to 2.0 wt%, the ultimate tensile strength did not significantly change, from 67.3 to 67.8 MPa.
어트리션 볼밀링 조건 변화에 따른 마그네슘 분말의 미세화 거동
유효상,김용호,김정한,김태경,손현택,이성희,Yoo, Hyo-Sang,Kim, Yong-Ho,Kim, Jung-Han,Kim, Tae-Kyung,Son, Hyeon-Taek,Lee, Seong-Hee 한국재료학회 2014 한국재료학회지 Vol.24 No.11
In this research, magnesium powder was prepared by gas atomizing. Refinement behaviors of magnesium powder produced under different conditions were investigated using a mechanical milling (attrition milling) process. Analyses were performed to assess the characterization and comparison of milled powder with different steel ball sizes and milling times. The powders were analyzed by field emission scanning electron microscope, apparent density and powder fluidity. The particle morphology of the Mg powders changed from spherical particles of feed metals to irregular oval particles, then plate type particles, with an increasing milling time. Because of the HCP structure, deformation occurs due to the existence of the easily breakable C-axis perpendicular to the base, which results in producing plate-type powders. An increase in ball size and the impact energy of the magnesium powder maximizes the effect of refinement. Furthermore, it is possible to improve the apparent density and fluidity according to the smoothness of the surface of the initial powder.