http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유병석,김영길,You, Byung-Sek,Kim, Young-Kil 한국정보통신학회 2010 한국정보통신학회논문지 Vol.14 No.9
Digital radio frequency memory (이하 DRFM)은 입력되는 RF신호를 저장 후 필요한 시점에 입력된 RF신호로 복원하여 출력하는 기능을 가진 장치로써 Jammer, EW시뮬레이터, Target Echo Generator[1] 등 사용되는 분야가 광범위하다. 본 논문에서는 고주파 입/출력모듈, 국부 발진모듈로 구성된 고주파부와 디지털 처리부로 이루어진 DRFM의 하드웨어적 구현 방안을 제안한다. 그리고 펄스형태의 RF신호를 양자화하는 ADC(A/D conversion), 이 데이터를 저장하고 재생신호를 생산하는 FPGA와 RF 신호를 생산하는 DAC(D/A conversion)로 구성되는 디지털 처리부에서 복제된 신호 생성방안을 제안한다. 이렇게 제안된 방안을 적용하여 제작한 후 모의 신호를 입력하여 얻은 시험결과를 통하여 이 제안방안의 타당성을 확인한다. Digital Radio Frequency Memory, ( as DRFM ), is a device with the ability to restore output to the input RF signal in the required time after storing the incoming RF signals. Therefore DRFM is widely used in Jammer, EW Simulator, Target Echo Generator, and so on. This paper proposes its hardware implementation composed with the high frequency part and the digital processing part consisting of RF input/output module and local oscillator module. It is also proposed the replicated signal generation method which is consisted of the Analog-Digital conversion in the form of pulsed RF signal quantization, and FPGA to save and produce the playback signal, and RF signals to produce a Digital-Analog Conversion in the digital processing unit. This proposed scheme applied to test board and confirmed the validity of the proposed scheme through the test results obtained by the simulated input signals.
Hybrid TDOA 알고리즘 기반의 Airborne Emitter 위치탐지를 위한 Ground-Platform 센서의 위치 최적화
박진오,이우석,유병석,국찬호,정재우,Park, Jin-Oh,Lee, Woo-Seok,You, Byung-Sek,Kook, Chan-Ho,Chung, Jae-Woo 한국군사과학기술학회 2010 한국군사과학기술학회지 Vol.13 No.5
This paper considers the problem of time difference-of-arrival(TDOA) source localization when the TDOA and angle of arrival(AOA) measurements from an airborne emitter source are subject to ground-platform sensor position. The optimization of sensors' position is a challenging problem and a solution with good localization accuracy has yet to be found. This paper proposes an estimator that can achieve these purposes and provides optimized sensor position for good localization accuracy using the proposed estimator. The developed algorithm and sensor position are then examined under the special case of a single airborne source. The theoretical developments are supported by simulations.
2~18 GHz 광대역 캐비티 백 스파이럴 안테나 설계
조정래,박진오,유병석,정운섭,정우성,박동철,Cho, Jung-Rae,Park, Jin-Oh,You, Byung-Sek,Jeong, Un-Seob,Chung, Woo-Sung,Park, Dong-Chul 한국전자파학회 2008 한국전자파학회논문지 Vol.19 No.10
본 논문에서는 $2{\sim}18$ GHz 광대역 캐비티 백 스파이럴 안테나 설계에 대하여 기술하였다. Archimedean 스파이럴 안테나의 설계 기법을 바탕으로 스파이럴 안테나의 암 패턴과 백 캐비티를 설계하고, CST사의 MWS를 이용하여 시뮬레이션 하였다. 시뮬레이션을 통하여 안테나의 VSWR, 축비(axial ratio) 그리고 반전력 빔 폭을 고찰하였다. 또한, 동작 대역에서 요구되는 VSWR 특성을 만족시키는 Marchand 동축형 밸런을 설계하였다. 최종적으로 제작 및 측정을 통해 안테나의 성능 및 설계 방법의 타당성을 검증하였다. In this paper, design of a $2{\sim}18$ GHz wideband cavity-backed spiral antenna is investigated. Firstly, an arm pattern and a backing cavity of a cavity-backed spiral antenna are designed based on the design theory of an Archimedean spiral antenna as well as by using CST's MWS. VSWR, axial ratio, and HPBW(Half Power Beam Width) characteristics are considered in the simulation. Secondly, a Marchand coaxial balun is designed to meet the required VSWR within the frequency band of operation. Finally, the validity of these approaches is verified by comparing the simulated results with measured ones.
조정래(Jung-Rae Cho),박진오(Jin-Oh Park),유병석(Byung-Sek You),정운섭(Un-Seob Jeong),정우성(Woo-Sung Chung),박동철(Dong-Chul Park) 한국전자파학회 2008 한국전자파학회논문지 Vol.19 No.10
본 논문에서는 2~18 ㎓ 광대역 캐비티 백 스파이럴 안테나 설계에 대하여 기술하였다. Archimedean 스파이럴 안테나의 설계 기법을 바탕으로 스파이럴 안테나의 암 패턴과 백 캐비티를 설계하고, CST사의 MWS를 이용하여 시뮬레이션 하였다. 시뮬레이션을 통하여 안테나의 VSWR, 축비(axial ratio) 그리고 반전력 빔 폭을 고찰하였다. 또한, 동작 대역에서 요구되는 VSWR 특성을 만족시키는 Marchand 동축형 밸런을 설계하였다. 최종적으로 제작 및 측정을 통해 안테나의 성능 및 설계 방법의 타당성을 검증하였다. In this paper, design of a 2~18 ㎓ wideband cavity-backed spiral antenna is investigated. Firstly, an arm pattern and a backing cavity of a cavity-backed spiral antenna are designed based on the design theory of an Archimedean spiral antenna as well as by using CST's MWS. VSWR, axial ratio, and HPBW(Half Power Beam Width) characteristics are considered in the simulation. Secondly, a Marchand coaxial balun is designed to meet the required VSWR within the frequency band of operation. Finally, the validity of these approaches is verified by comparing the simulated results with measured ones.