새로운 상호연결망 하프 버블정렬 그래프 설계 및 성질 분석

서정현,심현,이형옥,Seo, Jung-Hyun,Sim, Hyun,Lee, Hyeong Ok 한국정보통신학회 2017 한국정보통신학회논문지 Vol.21 No.7

버블정렬 그래프는 노드 대칭이며 데이터 정렬 알고리즘에 활용 할 수 있다. 본 연구에서는 버블정렬 그래프의 망 비용을 개선한 하프 버블정렬 그래프를 제안하고 분석한다. 하프 버블정렬 그래프 $HB_n$의 노드수는 n!이고 분지수는 ${\lfloor}n/2{\rfloor}+1$이다. 하프 버블정렬 그래프의 분지수는 버블정렬 그래프의 분지수의 $${\sim_=}0.5$$배 이고, 지름은 $${\sim_=}0.9$$배 이다. 버블정렬 그래프의 망 비용은 $${\sim_=}0.5n^3$$이고, 하프 버블정렬 그래프의 망 비용은 $${\sim_=}0.2n^3$$이다. 하프 버블정렬 그래프는 버블정렬 그래프의 서브 그래프임을 증명하였다. 추가로 라우팅 알고리즘을 제안하였고 지름을 분석하였다. 마지막으로 버블정렬 그래프와 망 비용을 비교 하였다. The Bubble sort graph is node symmetric, and can be used in the data sorting algorithm. In this research we propose and analyze that Half Bubble sort graph that improved the network cost of Bubble sort graph. The Half Bubble sort graph's number of node is n!, and its degree is ${\lfloor}n/2{\rfloor}+1$. The Half Bubble sort graph's degree is $${\sim_=}0.5$$ times of the Bubble sort, and diameter is $${\sim_=}0.9$$ times of the Bubble sort. The network cost of the Bubble sort graph is $${\sim_=}0.5n^3$$, and the network cost of the half Bubble sort graph is $${\sim_=}0.2n^3$$. We have proved that half bubble sort graph is a sub graph of the bubble sort graph. In addition, we proposed a routing algorithm and analyzed the diameter. Finally, network cost is compared with the bubble sort graph.

정이진트리, 하이퍼큐브 및 하이퍼피터슨 네트워크를 피터슨-토러스(PT) 네트워크에 임베딩

서정현,이형옥,장문석,Seo, Jung-Hyun,Lee, Hyeong-Ok,Jang, Moon-Suk 한국정보과학회 2008 정보과학회논문지 : 시스템 및 이론 Vol.35 No.8

본 논문에서, 정이진트리와 노드수가 증가함에 따라 분지수가 증가하는 하이퍼큐브, 하이퍼피터슨 연결망을 분지수가 고정된 피터슨-토러스(PT) 연결망에 일대일 임베딩 하였다. 일대일 임베딩은 일대다 임베딩이나 다대일 임베딩과 비교하여 프로세서의 낭비나 프로세서의 과부하의 위험이 적다. 하이퍼큐브나 하이퍼 피터슨에서 개발된 알고리즘들이 피터슨-토러스에서 사용될 때 유휴 프로세세가 많지 않도록 확장율 ${\doteqdot}1$, 연장율 1.5n+2 그리고 밀집율 O(n)에 일대일 임베딩 하였고, 메시지 전송길이에 영향을 받지 않는 웜홀 라우팅 방식의 시스템에서 메시지의 병목현상을 피할 수 있도록 정이진트리를 PT 네트워크에 밀집율 1, 확장율 ${\doteqdot}5$ 그리고 연장율 O(n)에 일대일 임베딩 하였다. In this paper, the hypercube, hyperpetersen networks, whose degree is increasing in accordance with expansion of number of node and complete binary tree are one-to-one embedded into peterson-torus(PT) network which has fixed degree. The one-to-one embedding has less risk of overload or idle for the processor comparative to one-to-many and many-to-one embedding. For the algorithms which were developed on hypercube or hyperpetersen are used for PT network, it is one-to one embedded at expansion ${\doteqdot}1$, dilation 1.5n+2 and link congestion O(n) not to generate large numbers of idle processor. The complete binary tree is embedded into PT network with link congestion =1, expansion ${\doteqdot}5$ and dilation O(n) to avoid the bottleneck at the wormhole routing system which is not affected by the path length.

적색 발광 (Y,Al)VO₄:Eu³⁺ 형광체 나노입자의 합성과 발광 특성

서정현,최성호,남산,정하균,Seo, Jung-Hyun,Choi, Sung-Ho,Nahm, Sahn,Jung, Ha-Kyun 한국재료학회 2012 한국재료학회지 Vol.22 No.2

Red-emitting $Eu^{3+}$-activated $(Y_{0.95-x}Al_x)VO_4$ (0 < x $\leq$ 0.12) nanophosphors with the particle size of ~30 nm and the high crystallinity have been successfully synthesized by a hydrothermal reaction. In the synthetic process, deionized water as a solvent and ethylene glycol as a capping agent were used. The crystalline phase, particle morphology, and the photoluminescence properties of the excitation spectrum, emission intensity, color coordinates and decay time, of the prepared $(Y_{0.95-x}Al_x)VO_4:Eu^{3+}$ nanophosphors were compared with those of the $YVO_4:Eu^{3+}$. Under 147 nm excitation, $(Y_{0.95-x}Al_x)VO_4$ nanophosphors showed strong red luminescence due to the $^5D_0-^7F_2$ transition of $Eu^{3+}$ at 619 nm. The luminescence intensity of $YVO_4:Eu^{3+}$ enhanced with partial substitution of $Al^{3+}$ for $Y^{3+}$ and the maximum emission intensity was accomplished at the $Al^{3+}$ content of 10 mol%. By the addition of $Al^{3+}$, decay time of the $(Y,Al)VO_4:Eu^{3+}$ nanophosphor was decreased in comparison with that of the $YVO_4:Eu^{3+}$ nanophosphor. Also, the substitution of $Al^{3+}$ for $Y^{3+}$ invited the improvement of color coordinates due to the increase of R/O ratio in emission intensity. For the formation of transparent layer, the red nanophosphors were fabricated to the paste with ethyl celluloses, anhydrous terpineol, ethanol and deionized water. By screen printing method, a transparent red phosphor layer was formed onto a glass substrate from the paste. The transparent red phosphor layer exhibited the red emission at 619 nm under 147 nm excitation and the transmittance of ~80% at 600 nm.

OFDM 전송시스템의 새로운 채널 보상 및 등화 기법

서정현,이현,정차근,조경록,Seo, Jung-Hyun,Lee, Hyun,Cheong, Cha-Keon,Cho, Kyoung-Rok 한국통신학회 2003 韓國通信學會論文誌 Vol.28 No.12A

본 논문에서는 OFDM (Orthogonal Frequency-Division Multiplexing)방식을 적용하는 ITS (Intelligent Traffic System) 시스템에서 페이딩 채널을 보상하기 위한 새로운 기법을 제안한다. 기존의 방법과는 달리 파일럿 채널을 이용한 채널 보상 회로에 나눗셈이 없고 간단한 구조의 성능을 저하시키기 않은 알고리즘을 제안하여 회로의 동작 속도와 크기에서 이점을 얻는다. 또한 제안한 회로는 빠른(fast) 페이딩에서 생긴 왜곡을 먼저 보상하고 채널과 심벌의 간섭을 단일 탭 등화기로 제거하여 이중 채널 보상 효과를 얻는다. 모든 알고리즘은 디지털 시스템 구현에 적합하게 제시되고 검증된다. 본 논문의 채널 보상 방법으로 하드웨어 구현 시 사이즈가 20%감소하며. 16-QAM (16-Quadrature Amplitude Modulation)방식의 ITS모뎀에 적용 시 SNR (Signal-to-Noise Rate)이 l0dB 이하에서 3dB정도 BER (Bit Error Rate)이 개선된 결과를 얻었다. A new fading channel estimation technique is proposed for an OFDM based modem In the ITS system. The algorithm is based on the transfer function extraction of the channel using the pilot signals and compensated the channel preceding the equalization. The newly derived algorithm is division-free arithmetic operations allows the faster circuit operation and the smaller circuit size. Proposed techniques compensate firstly the distortion which is generated at fading channels and secondly eliminate inter-symbol interference. All algorithms are suitability estimated and improved for a system implementation using digital circuits. As the results, the circuit size is reduced by 20% of the conventional design and achieved about 10% performance improvement at low SNR under 10dB in case of ITS system adapted 16-QAM mode.

교류 음 전압에 따른 형광 OLED의 전계 발광 특성

서정현,양재웅,백경갑,주성후,Seo, Jung-Hyun,Yang, Jae-Woong,Paek, Kyeong-Kap,Ju, Sung-Hoo 한국표면공학회 2019 한국표면공학회지 Vol.52 No.2

To study the characteristics of AC driven OLED, we fabricated the fluorescent OLEDs and analyzed the electroluminescence characteristics of OLEDs with AC negative voltage. The luminance and the current density of the OLED decreased, and the number and size of the dark spots increased in proportion to the duration time and level of the applied AC negative voltage. The current efficiency of the OLED was improved when high AC negative voltage was applied within a short time. When the AC negative voltage of 10 V was applied for 1 minute, the efficiency was improved by 12.4%. Also, the degradation of luminance and current efficiency due to the duration of light emission was improved in the case of OLED applied for 1 minute with 10 V AC negative voltage. These are expected as a result of the improvement of the leakage current characteristics by eliminating the short-circuit region formed by the defect of the OLED at the AC negative high voltage. As a result, the continuous application of AC negative voltage reduced the luminance and the current density of OLED, but the temporary application of AC negative voltage with the proper time and voltage could improve the efficiency and lifetime of OLED.

W-ZF 기법을 이용한 MIMO-FTN 송수신 구조 연구

서정현,정지원,Seo, Jung-hyun,Jung, Ji-won 한국정보통신학회 2017 한국정보통신학회논문지 Vol.21 No.7

In this paper, we propose a decoding method that improves the transmission rate and reliability by integrating MIMO(Multiple Input Multiple Output) communication scheme using turbo code and FTN(Faster Than Nyquist) scheme among high rate and high reliability wireless communication schemes in wireless communication. The existing MIMO-FTN(Multiple Input Multiple Output-Faster Than Nyquist) scheme based on hierarchical space-time coded method induced data rate loss due to the application of the space-time trellis coding scheme to remove adjacent symbol interference due to FTN scheme. To solve these problems, this paper proposes a method using W-ZF(Weighted-Zero Forcing) which overcomes the disadvantages of ZF(Zero Forcing) scheme in MIMO-FTN scheme using ZF scheme. In this paper, we compared the performance and the transmission rate of the MIMO-FTN scheme based on the hierarchical space-time coding, the MIMO-FTN scheme using W-ZF and the SISO-FTN scheme. As a result, the MIMO-FTN scheme using the W-ZF scheme is two times better than the other two schemes. 본 논문에서는 무선 통신에서의 높은 전송률과 신뢰도 있는 무선 통신 방안 중 터보 부호를 이용한 MIMO(Multiple Input Multiple Output) 통신 기법과 FTN(Faster Than Nyquist) 기법을 접목시켜 전송률을 향상시키며 신뢰성을 높일 수 있는 복호 방법을 제안한다. 기존의 계층적 시공간 부호화 기반의 MIMO-FTN(Multiple Input Multiple Output-Faster Than Nyquist) 기법은 FTN으로 인한 인접 심볼 간섭을 제거하기 위한 시공간 부호화 방식의 적용으로 전송률의 손해를 초래한다. 이러한 문제점을 해결하기 위해 본 논문에서는 ZF(Zero Forcing) 기법을 이용한 MIMO-FTN 기법에서 ZF 기법의 단점을 보완한 W-ZF(Weighted-Zero Forcing)을 이용한 방식을 제안한다. 본 논문에서는, 시뮬레이션을 통해 계층적 시공간 부호화 기반의 MIMO-FTN 기법과, W-ZF을 적용한 MIMO-FTN 기법, SISO-FTN 기법에서 FTN의 간섭량에 따른 성능과 전송률을 비교 하였다. 그 결과 W-ZF 기법을 적용한 MIMO-FTN 기법이 다른 두 기법보다 전송률에서 2배 더 좋은 것을 확인할 수 있다.

메쉬 부류 네트워크를 피터슨-토러스(PT) 네트워크에 임베딩

서정현,이형옥,장문석,Seo, Jung-Hyun,Lee, Hyeong-Ok,Jang, Moon-Suk 한국정보처리학회 2008 정보처리학회논문지 A Vol.15 No.4

본 논문은 분지수가 상수인 네트워크들을 피터슨-토러스(PT) 네트워크에 임베딩 가능함을 보인다. 상호연결망 G가 H에 임베딩 되면 G에서 설계된 병렬 알고리즘을 상호연결망 H에 적용할 수 있다. 토러스(메쉬)를 PT에 연장율 5, 밀집율 5 그리고 확장율 1에 일대일 임베딩 하였고, 허니컴브 메쉬를 PT에 연장율 5, 밀집율 2 그리고 확장율 5/3에 일대일 임베딩 하였다. 추가로 평균 연장율을 분석하였다. 널리 알려진 토러스 와 허니컴브 메쉬 네트워크를 연장율과 밀집율을 5이하에 PT에 임베딩 함으로써 웜홀 라우팅 방식과 store-and-forward 방식 모두에서 임베딩 알고리즘이 사용 가능하고, 일대일 임베딩을 함으로써 시뮬레이션시 프로세서 작업 처리량을 최소화 하였다. In this paper, we prove mesh-like networks can be embedded into Petersen-Torus(PT) networks. Once interconnection network G is embedded in H, the parallel algorithm designed in Gcan be applied to interconnection network H. The torus is embedded into PT with dilation 5, link congestion 5 and expansion 1 using one-to-one embedding. The honeycomb mesh is embedded into PT with dilation 5, link congestion 2 and expansion 5/3 using one-to-one embedding. Additional, We derive average dilation. The embedding algorithm could be available in both wormhole routing system and store-and-forward routing system by embedding the generally known Torus and honeycomb mesh networks into PT at 5 or less of dilation and congestion, and the processor throughput could be minimized at simulation through one-to-one.

교류 구동 방법에 의한 유기전계발광소자 발광 특성의 모델

서정현,주성후,Seo, Jung Hyun,Ju, Sung Hoo 한국재료학회 2021 한국재료학회지 Vol.31 No.10

This paper proposes a mathematical model that can calculate the luminescence characteristics driven by alternating current (AC) power using the current-voltage-luminance (I-V-L) properties of organic light emitting devices (OLED) driven by direct current power. Fluorescent OLEDs are manufactured to verify the model, and I-V-L characteristics driven by DC and AC are measured. The current efficiency of DC driven OLED can be divided into three sections. Region 1 is a section where the recombination efficiency increases as the carrier reaches the emission layer in proportion to the increase of the DC voltage. Region 2 is a section in which the maximum luminous efficiency is stably maintained. Region 3 is a section where the luminous efficiency decreases due to excess carriers. Therefore, the fitting equation is derived by dividing the current density and luminance of the DC driven OLED into three regions, and the current density and luminance of the AC driven OLED are calculated from the fitting equation. As a result, the measured and calculated values of the AC driving I-V-L characteristics show deviations of 4.7% for current density, 2.9 % for luminance, and 1.9 % for luminous efficiency.

발광층 구조에 따른 백색 인광 OLED의 발광 특성

서정현,백경갑,주성후,Seo, Jung-Hyun,Paek, Kyeong-Kap,Ju, Sung-Hoo 한국전기전자재료학회 2012 전기전자재료학회논문지 Vol.25 No.6

We studied the emission characteristics of white phosphorescent organic light-emitting diodes (PHOLEDs), which were fabricated using a two-wavelength method. To optimize emission characteristics of white PHOLEDs, white PHOLEDs with red/blue, blue/red and red/blue/red emitting layer (EML) structures were fabricated using a host-dopant system. In case of white PHOLEDs with red/blue structure, the best efficiency was obtained at a structure of red (15 nm)/blue (15 nm). But the emission color was blue-shifted white. In case of white PHOLEDs with blue/red structure, the better color purity and efficiency were observed at a blue (29 nm)/red (1 nm) structure. For additional improvement of color purity in white PHOLEDs with blue (29 nm)/red (1 nm) EMLs, we fabricated white PHOLEDs with red (1 nm)/blue (28 nm)/red (1 nm) structure. The current efficiency, external quantum efficiency, and CIE (x, y) coordinate were 27.2 cd/A, 15.1%, and (0.382, 0.369) at 1,000 $cd/m^2$, respectively.

교류전원 구동방식에 의한 형광 OLED의 발광 특성

서정현,김지현,주성후,Seo, Jung-Hyun,Kim, Ji-Hyun,Ju, Sung-Hoo 한국전기전자재료학회 2014 전기전자재료학회논문지 Vol.27 No.2

To operate organic light emitting device (OLED) with alternating current (AC) power source without AC/DC(direct current) converter, we fabricated the fluorescent OLED and measured the emission characteristics with AC and DC. The OLED operated by AC showed higher maximum current efficiency of 8.2 cd/A and maximum power efficiency of 8.3 lm/W. But current efficiency and power efficiency of AC driven OLED showed worse than DC driven OLED at high voltage above 10 V. This result can be explained by the peak voltage of AC was $\sqrt{2}$ times than DC, In case of low driving voltage the emission characteristics were improved by the peak voltage of AC, but in case of high driving voltage the emission efficiencies were decreased by the roll off phenomena. Finally, serial OLED arrays using twelve OLEDs driven by AC 110 V showed average voltage of 9.17 V, voltage uniformity of 99.0%, average luminance of $1,175cd/m^2$, luminance uniformity of 94.4%.