http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
유한차분법을 이용한 비등방성 복합적층판의 안정성에 관한 연구
백한솔,이상열,장석윤 서울시립대학교 산업기술연구소 1998 산업기술연구소논문집 Vol.6 No.1
The solution of anisotropic plates using classical methods is limited to relatively simple load and boundary conditions. If these conditions are more complex, the analysis becomes increasingly tedious and even impossible. For many plate problems of considerable practical interest analytic solutions to the governing differential equations cannot be found. Among the numerical techniques presently available, the finite difference method(FDM) is a powerful numerical method. The objective of this paper is to analyze stability of anisotropic composite laminated plates considering shear deformation. In applying numerical methods to slove differential equations of anisotropic plates, this study uses the finite difference methods. In determining the eigenvalue for unsymmetric system matrix by FDM, this paper uses the householder method in IMSL(International Mathematical Software Library). Several numerical examples show the effectiveness of this study and they will give a guide in deciding minimum buckling load and various mode shapes.
백한솔,정연우,주미소,정용화,박대희,김학재 한국멀티미디어학회 2016 멀티미디어학회논문지 Vol.19 No.8
To reduce huge losses in pig farms, weaning pigs with weak immune systems are required to be carefully supervised. Even if various researches have been performed for pig monitoring environment, segmenting each pig from touching-pigs is still entrenched as a difficult problem. In this paper, we propose a segmentation method for touching-pigs by using concave-points and edge information in a video surveillance system. Especially, we interpret the segmentation problem as a time-series analysis problem in order to identify the concave-points generated by touching-pigs. Based on the experimental results with the videos obtained from a domestic pig farm, we believe that the proposed method can accurately segment the touching-pigs.
백한솔,김민제,백정주,김도환,신교직,최경호,조정호 한국공업화학회 2019 한국공업화학회 연구논문 초록집 Vol.2019 No.0
We fabricated a high-quality PHPS-derived SiO<sub>2</sub> film by intense pulsed UV irradiation and applied it as a gate dielectric layer in OFETs and complementary inverters. The conversion process of PHPS to SiO<sub>2</sub> was optimized by varying the number of intense pulses and applied voltage. The chemical structure and gate dielectric properties of the PHPSderived SiO<sub>2</sub> films were systematically investigated via FT-IR spectroscopy and leakage current measurements, respectively. The resulting PHPS-derived SiO<sub>2</sub> gate dielectric layer showed a leakage current density of 9.7×10-12Acm<sup>-2</sup> at 4.0MVcm<sup>-1</sup>. The fabrication of the PHPS-derived SiO<sub>2</sub> gate dielectric layer by a simple solution process and intense pulsed UV irradiation at room temperature serves as a novel approach for the realization of large-area flexible electronics in the flexible device industry of the future.
백한솔 ( Hansol Baek ),사재원 ( Jaewon Sa ),김희곤 ( Heegon Kim ),정용화 ( Yongwha Chung ),박대희 ( Daihee Park ) 한국정보처리학회 2016 한국정보처리학회 학술대회논문집 Vol.23 No.2
기술의 발전에 따라 소형 디바이스에서도 데이터를 수집하고 전송하는 것이 가능해졌다. 따라서 최근 IoT와 헬스케어가 부각되고 있으며 여기서 발생한 데이터에 대한 많은 연구가 진행되고 있다. 그 중에서도 헬스케어 장비에 내장된 심전도 센서를 이용하여 시계열 데이터를 수집할 수 있고, 여기서 수집한 데이터는 부정맥 등의 심장질환 진단의 중요한 지표로서 사용될 수 있다. 시계열 데이터는 시계열 분석 방법을 사용하여 정상 패턴과 비정상 패턴으로 분류할 수 있지만, 대량의 시계열 분석 방법은 수행시간이 많이 소요되기 때문에 이를 단축 할 필요성이 있다. 본 논문에서는 시계열 데이터 분석 기법 중 하나인 Shapelet을 사용하여 심전도 데이터의 패턴을 정상 및 비정상으로 분류하였고, 병렬처리 기법을 적용하여 수행시간을 단축하였다. 실험 결과, 각각의 심전도 데이터는 87%의 정확도로 분류되었고, Shapelets을 탐색하는 구간의 병렬처리를 통하여 수행 시간이 약 60%로 감소하였음을 확인하였다.