http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
폐 LCD (Liquid Crystal Display) 해체 후 분리된 CCFL (Cold Cathode Fluorescence Light) 내 수은의 건식 제거 공정
박재량,이성규,강이승,이찬기,조성수,홍명환,홍현선,Park, Jae Layng,Lee, Sungkyu,Kang, Leeseung,Lee, Chan Gi,Cho, Sung-Su,Hong, Myung Hwan,Hong, Hyun Seon 한국자원리싸이클링학회 2014 資源 리싸이클링 Vol.23 No.2
LCD TV와 컴퓨터 모니터에는 스크린을 밝게 할 목적으로 냉음극관이 장치되어 있는데 이러한 냉음극관 대부분에는 수은이 봉입되어 있으므로 폐 LCD의 재활용 시 적절히 취급되어야 한다. 아울러 이러한 폐 LCD내의 냉음극관의 처리는 2002년에 채택된 EU의 WEEE 와 RoHS 지침에 따라 취급되고 제거되어야만 한다. 본 연구에서는 폐 LCD의 몰드 프레임에 장착된 CCFL을 안전하고 효율적으로 제거한 다음 여기 함유된 수은과 형광체 화합물을 환경친화적으로 분리하여 무해화 처리할 수 있는 건식 공정을 개발하였다. 이를 통해서 실용적이고 경제성 있는 폐디스플레이 자원 재활용 통합공정 개발에 기여할 목적으로 CCFL 무해화 시스템의 설계 및 제작, 이를 운용한 수은/형광체 화합물의 환경친화적 무해화 처리 효율을 평가해 보았다. CCFL 무해화 시스템을 이용하여 처리된 CCFL내 잔류 수은의 양을 정량적으로 평가해 본 결과 무해화율 99% 이상을 달성하였다. LCD televisions and monitors use cold cathode fluorescence lamps (CCFLs) to illuminate the screen. Most CCFLs contain mercury and they have to be carefully handled at the end of their lives as per minimum treatment standards under the Waste Electrical and Electronic Equipment (WEEE) and Restriction of Hazardous Substances (RoHS) directives. CCFLs were carefully separated from mold frames of waste LCD units for primary decontamination of mercury/fluorescent compound mixture using CCFL decontamination system designed and fabricated in the present research. Residual mercury was further removed by employing a pyro-process, where crushed CCFL tubes transferred from primary decontamination process were subject to heat treatment at $550^{\circ}C$ in a box furnace: more than 99% of mercury was removable from waste CCFLs.
반도체공정 폐가스 처리용 고내구성 연소분해모듈을 위한 니켈기반 초내열합금 코팅 특성평가
박재량,송형운,이종범,엄성현 한국공업화학회 2015 한국공업화학회 연구논문 초록집 Vol.2015 No.1
반도체, 전자산업에서 일반적으로 PFCs 및 NF<sub>3</sub>를 처리하기 위한 연소기술 적용 장치를 스크러버로 통칭하며, 전단부에서 Air burner 또는 순산소 버너를 이용하여 PFCs 및 NF<sub>3</sub>를 분해하고, 후단부로 이송되면서 온도를 낮추며, 최종적으로 Wet scrubber를 이용하여 연소부산물을 제거한다. 최근까지도 고온/유해가스 고부식성 환경에서 내화학적 안정성이 확보된 소재의 개발 부재로 연소분해장치 및 배관라인의 내구성이 현저히 떨어짐에 따라 유지보수 비용의 증가로 인해 수익성 악화로 이어지기 때문에 경제성 제고 및 처리효율을 증대하기 위한 고내구성 부품에 대한 수요가 증가하고 있다. 본 연구에서는 저환경부하 스크러버용 연소분해 모듈의 경제성과 유지관리 효율성 증대를 위한 고온 내열화학성 코팅소재 및 공정을 개발하고자 하였다. 기존 모듈 소재의 내부를 니켈 기반 합금으로 효과적으로 코팅하여 그 적용성을 평가하였다.
박재량,이찬기,윤진호,홍명환,박경수 한국공업화학회 2015 한국공업화학회 연구논문 초록집 Vol.2015 No.1
PVB(Polyvinyl butyral) 필름은 주로 자동차의 합판안전유리 중간막으로 사용되며, 바인더, 도료의 재료로 사용된다. PVB는 강한 접착성, 광 투과성, 표면 부착성, 단단함, 신축성 등의 장점을 갖는다. 산업계에서 널리 사용되고 있는 아주 중요한 자원인 PVB는 가격 또한 다른 수지에 비해 매우 고가이다. 자동차용 PVB 필름을 재활용하기 위해서는 필름에 부착된 유리 컬릿과 미분을 완전히 제거하여한다. 그러나, 유리와 필름의 상용 분리 기술이 전무한 실정이다. 본 연구에서는 자동차폐전면유리로부터 PVB 필름을 재활용 할 수 있는 기술 개발에 관한 연구를 수행하였다. 폐 PVB 필름에서 부착된 유리를 제거하기 위해 비교적 분리가 쉬운 습식 교반법을 이용하였다. 분리액의 농도, 분리액 온도, 교반기의 회전속도, 교반 시간의 최적화를 통해 재생된 PVB은 SEM, EDS 분석을 통해 부착유리의 제거를 관찰하였다. 재생된 PVB의 재활용 가능성 확인을 위해 FT-IR 및 TGA 분석을 실시하였다.
Comprehensive Review for Indium Recovery from Waste LCD Panels
박재량,박은덕 한국에너지학회 2023 에너지공학 Vol.32 No.4
Waste liquid crystal display (LCD) accounts for one-sixth of the total global E-waste generated, a major environmental issue and a secondary resource for various metals and materials, including critical metals like Indium. The current review discusses and summarizes the recycling of waste LCDs and comprehensively focuses on indium recovery from waste LCD panels through various applied technologies. Extraction and recovery technologies employed for indium recovery from Indium-tin-oxide (ITO), which has 90 wt% In2O3 and 10 wt% SnO2, of the waste LCD panel is an important resource for indium has been discussed extensively. The extensive literature investigation indicates that indium recovery through various technologies like pyrometallurgy, chemical metallurgy, and hydrometallurgy have been employed. Among them, the hydrometallurgy process has been a major focus. Hence, various aspects like leaching, solvent extraction, and metal recovery through stripping of hydrometallurgy have been more intensively analyzed and discussed. The current review indicates that hydrometallurgy could be a promising technology for successful industrial-scale indium recovery from segregated panels of waste LCD. As most of the studies reported are on the laboratory scale, the requirement of industrial-scale investigation for process development is suggested.
박재량,임탁형,이승복,박석주,신동열,한규승,송락현 한국수소및신에너지학회 2010 한국수소 및 신에너지학회논문집 Vol.21 No.1
Composites of LSCF (La06Sr0.4Co0.2Fe0.8O3-δ) and CGO (gadolinium doped ceria)-based ceramics are logical candidate cathode materials with CGO electrolytes. LSCF with perovskite structure was synthesized and investigated by Solid State Reaction (SSR) method used as cathode materials for SOFC (solid oxide fuel cell). The optimized temperature was 1100℃ to synthesize La06Sr0.4Co0.2Fe0.8O3-δ with rhombohedral structure. The polarization resistance of the LSCF/CGO (50:50 wt.%) was smaller than that of other composite cathodes. The analysis of the EIS data of LSCF/CGO suggests that the diffusion and adsorption-desorption of oxygen can be the key process in the cathodic reaction.
SOFC 용 LSCF/CGO 공기극의 제조 및 특성연구
박재량(Park, Jae-Layng),임탁형(Lim, Tak-Hyoung),이승복(Lee, Seung-Bok),박석주(Park, Seok-Joo),신동렬(Shin, Dong-Ryul),송락현(Song, Rak-Hyun) 한국신재생에너지학회 2009 한국신재생에너지학회 학술대회논문집 Vol.2009 No.11
Composites of LSCF(La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-delta} and CGO(gadolinium doped ceria) is an efficient candidate cathode material with CGO electrolytes. In this study, LSCF with exact perovskite structure was synthesized by using solid state reaction(SSR) method. The optimized temperature to synthesize La_{0.6}Sr_{0.4}Co_{0.2}Fe_{0.8}O_{3-delta} with rhombohedral structure. was 1100?C. The polarization resistance of the LSCF/CGO(50:50 wt.%) was smaller than those of other composite cathodes. The analysis of the EIS data of LSCF/CGO suggests that the diffusion and adsorption-desorption of oxygen can be the key process in the cathodic reaction of SOFC using LSCF/CGO as cathode material.