http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
S-BRT 운행행태를 고려한 저상버스의 정차시간 예측모형
신소명,이수범,김영찬,박신형,유연승,최정훈,Shin, S.M.,Lee, S.B.,Kim, Y.C.,Park, S.H.,Yu, Y.S.,Choi, J.H. 한국안전학회 2021 한국안전학회지 Vol.36 No.1
This basic study introduces the concept of S-BRT and develops dwell time estimation models that consider road geometry and S-BRT characteristics for a signal operation strategy to meet the S-BRT's operational goal of high speed and punctuality. Field surveys of low-floor buses similar in shape to S-BRTs and data collection of passengers, station elements, vehicle elements, and other factors that can affect stop times were used in a regression analysis to establish statistically significant dwell time estimation models. These dwell time estimation models are developed by categorizing according to the locations of the signal or sidewalk that have the most impact on the dwell time. In this way, the number of people boarding and alighting the bus at the crowded door and the number of people boarding and alighting the bus at the front door considering the internal congestion was analyzed to affect the dwell time. The estimation dwell time models in this study can be used in the establishment of strategies that provide priority signals to S-BRTs.
김묘경,김은영,이봉경,윤산현,박세필,정길생,임진호,Kim, M.K.,Kim, E.Y.,Yi, B.K.,Yoon, S.H.,Park, S.P.,Chung, K.S.,Lim, J.H. The Korean Society for Reproductive Medicine 1997 Clinical and Experimental Reproductive Medicine Vol.24 No.3
본 실험은 초자화 동결된 생쥐 배반포기배의 융해 후 배양조건 및 이식방법이 난자의 생존에 미치는 효과를 조사하고자 실시하였다. 체외수정후, M16배양액에서 4일동안 배양하여 얻어진 생쥐 배반포기배는 EFS40 (40% ethylene glycol, 18% Ficoll, 0.5 M sucrose가 함유된 PBS)으로 초자화동결하였다. 실험 I에서는 융해 후 배양조건에 따른 난자들의 체외/체내 생존율을 조사하였다. 융해된 난자가 M16과 4 mg/ml 소혈청알부민과 20 가지 아미노산이 함유된 m-CR1 (2% BME 아미노산 용액, 1% MEM 아미노산 용액) 및 단층배양이 유도된 난구세포 (10% FBS가 함유된 m-CR1배양액)에서 각각 배양되었을 때, 융해 후 24시간째 체외 생존율은 배양조건에 따라 차이가 없었다(75.6, 83.1, 82.4%). 그러나 체내 발달율에 있어서 임신 15일째 생존 산자율은 39.0, 49.0, 38.1%로서 유사한 성적을 나타냈으나, 전체 착상율에 있어서는 m-CR1 (80.4%)에 배양되었을 때, M16 (51.2%), 난구세포와 공배양시 (57.1%)보다 유의하게 높은 생존율을 보였다(p<0.05). 실험 II에서는 수정란 이식 방법에 따른 체내 발달율을 조사하였다. 배반포기배를 융해 후 체외배양없이 곧바로 가임신 2, 3일째 대리모에 이식을 실시하였을 때, 가임신 2일째 대리모에서는 임신징후를 얻지 못하였고, 가임신 3일째 대리모에서는 50.0%의 착상율과 15.4%의 정상산자율을 얻었다. 그러나, 이러한 결과는 융해 후, 16시간 배양하여 가임신 3일째 대리모에 이식 (73.5, 57.1%)하는 경우보다 유의하게 낮은 결과였다(p<0.05). 실험 III에서는 초자화 동결된 배반포기배의 융해 후 배양시 발달이 늦어진 수정란의 이용효율을 극대화시키기 위해 융해한 4일째 초기, 5일째 초기, 5일째 팽창 배반포기배의 체외/체내 생존율을 조사하였다. 가장 높은 체외 생존율은 5일째 팽창 배반포기배 (78.3%)에서 얻었으나, 체내 발달율 (산자율, 착상율)에 있어서는 4일째 초기 배반포기배 (33.3, 66.7%)의 경우가, 5일째 팽창 배반포기배(29.0, 38.7%)의 경우보다 높았다(p<0.05). 따라서 본 연구의 결과는 배양조건과 수정란 이식방법에 따라 초자화 동결된 배아의 체외/체내 발달율을 높일 수 있으며, 발달이 늦은 배반포기배의 체내 발달율은 체외 배양시간이 길어질수록 낮아짐으로, 5일째 팽창 배반포기배보다 4일째 초기 배반포기배를 동결하는 것이 더 유용하다는 것을 알 수 있었다. This study was to test whether in vitro/in vivo survival of vitrified mouse blastocysts was influenced by culture conditions and ET method. Mouse blastocysts were obtained from in vitro fertilization and cultured for 4 days in M16 medium, and they were vitrified in EFS40 which contained 40% ethlyene glycol, 18% Ficoll and 0.5 mol sucrose in PBS. In experiment I, in vitro and in vivo survival rate of these embryos were evaluated in different culture condition after thawing. When thawed embryos were cultured in M16 medium as a control, m-CR1 medium contained 20 amino acids (2% BME amino acis and 1% MEM non-essential amino acids solution) and 4 mg/ml BSA and cumulus monolayer cell co-cultured condition in mCR1 medium (10% FBS), their in vitro survival at 24 hr after thawing was not affected by culture condition (75.6, 83.1, 82.4%). However, in vivo survival rates of implantation in m-CR1 medium (80.4%) were significantly higher than those of M16 medium (51.2%), co-culture (57.1%) condition, although there was no difference in live fetuses rates on day 15 gestation (39.0, 49.0, 38.1%). In experiment II, the in vivo development potential of embryos by ET methods was examined. When blastocysts were transferred to the day 2, 3 pseudopregnant recipient without culture soon after thawing, no pregnant recipient was obtained on the day 2 pseudopregnancy, and 50% of pregnancy rates and 15.4% of live fetus rates were obtained on the day 3 pseudopregnant recipients. These results were significantly lower than those of transferred group (day 3 pseudopregnant recipients) after culture for 16 hr post thawing (73.5, 57.1%) (p<0.05). In experiment III, to elevate usability of delayed embryos in vitro/in vivo survival of vitrified embryos (day 4 early, day 5 early and expanding blastocyst) were examined. in vivo survival rates (live fetus, total implantation) were higher in day 4 early blastocysts (33.3, 66.7%) than in day 5 expanding blastocysts (29.0, 38.7%), although the highest in vitro survival rates were obtained in the day 5 expanding brastocysts (78.3%). Therefore, these results suggest that the in vitro/in vivo survival rates of vitrified embryos could be improve by the culture condition and ET method and that the in vivo development rates of delayed embryos were decreased with longer culture duration in vitro. It means that more effective cryopreservation was obtained in day 4 early blastocysts than in day 5 expanding blastocysts.
최희철,박재홍,송준익,나재천,김민지,방한태,강환구,박성복,채현석,서옥석,유영선,김태원,Choi, H.C.,Park, Jae-Hong,Song, J.I.,Na, J.C.,Kim, M.J.,Bang, H.T.,Kang, H.G.,Park, S.B.,Chae, H.S.,Suh, O.S.,Yoo, Y.S.,Kim, T.W. 한국축산환경학회 2010 축산시설환경학회지 Vol.16 No.3
Geothermal heat pump system (GHPS) is an energy-efficient technology that use the relatively constant and renewable energy stored in the earth to provide heating and cooling. With the aim of using GHPS as a heating source, it's possibilities of application in farrowing house were examined by measuring environmental assessment and sow's performance. A total of 96 sows were assigned to 2 pig housings (GHPS and conventional housing) with 48 for four weeks in winter season. During the experimental period, indoor maximum temperature in GHPS-housing was measured up to $26.7^{\circ}C$, average temperature could maintain $21.2^{\circ}C$. The mean value of dust levels and $CO_2$, $NH_3$ and $H_2S$ gas emissions were decreased in GHPS-housing compare with those of conventional housing. Litter size, birth weight, parity and weaning weight did not differ between housings. However, feed intake of sow in GHPS-housing was lower than that of conventional housing. In energy consumption for heating, electric power consumption increased in GHPS-housing than the conventional housing, a 2,250 kwh increase, whereas there is no fuel usage for heater in GHPS-housing. Amount of ground water circulated for heating in cold weather for earth heat exchanger was 8.4-12.9 ton per day. In conclusion, GHPS may have environmental benefits and effectiveness of heating in farrowing housing and affect the performance in sows. 지열히트펌프를 이용한 축사용 냉난방시스템을 개발하고 농장 적용성을 검토하기 위하여 330 $m^2$ 규모의 농장에 개발 시스템을 설치하여 돈사에서의 난방 이용효과를 분석하였으며, 그 결과는 다음과 같다. 1. 지열 난방시 부하량은 24,104 kcal이었으며 농장시험 지열이용 냉난방시스템의 제원은 히트펌프 용량은 10 USRT 였으며, 상부 덕트형 30,000 kcal 홴코일유니트를 사용하였으며 FCU의 풍량은 90 $m^3$/분 이었다. 2. 지열 난방 1주령시 외부 최고기온 $14.2^{\circ}C$, 최저 영하 $9.3^{\circ}C$일때 시험구는 평균 $21.5^{\circ}C$로서 대조구 $19.8^{\circ}C$에 비하여 높았다. 3. 지열 난방 시험돈사의 먼지 농도는 PM10 185.3, PM2.5 40, PM1.0 $23.4{\mu}g/m^3$으로 대조구 PM10 481.4, PM2.5 47, PM1.0 $28.2{\mu}g/m^3$에 비하여 낮았다.4. 지열 난방 시험돈사의 유해가스농도는 $CO_2$ 1,470, $NH_3$ 10.6, $H_2S$ 0.05 ppm으로서 대조구 $CO_2$ 2,025, $NH_3$ 23.3, $H_2S$ 0.69 ppm에 비하여 유의적으로 (p<0.05) 낮았다. 5. 지열난방시 복당 이유두수는 10.5두로 대조구 10.4두에 비하여 높았으며 이유시체 중도 6.93 kg으로 대조구 6.86 kg에 비하여 컸으며 특히 온도가 낮은 대조구에서 모돈사료 섭취량이 99.6 kg으로 시험구 88.2 kg 보다 유의적으로 (p<0.05) 많았다. 6. 지열 난방시 외부기온과 지하수 순환량에 있어서 외부기온이 낮을 경우 1일간 8.4-12.9톤으로 지하수 순환량이 많았다.
박세제(S. J. Park),고대철(D. C. Ko),김병민(B. M. Kim),김영환(Y. H. Kim),김동환(D. H. Kim) 한국소성가공학회 2013 압출 및 인발 심포지엄 Vol.2013 No.9
In hot forging of bushing for track-link parts, the extrusion height depends on the section of initial billet. So, in this paper, the section cutted by press has been consider to increase production of bushing in hot forging process. But, because of uneven surface, the metal flow is not uniform in backward extrusion process. It should be solve the problems caused by forward-backward extrusion process using the uneven cutting surface. The purpose of this study is to design the forward-backward extrusion for track-link bushing through the regular position method.
박세제(S. J. Park),박준홍(J. H. Park),이경훈(K. H. Lee),김영환(Y. H. Kim),김병민(B. M. Kim),김동환(D. H. Kim) 한국소성가공학회 2014 한국소성가공학회 학술대회 논문집 Vol.2014 No.10
Recently, the amount of spring usage is on increase in the automotive and aircraft parts industry as well as home appliances. Manufacturing of spring is a need for diversification, specialized, mass production and high precision. Therefore it is very important to know the bending method and forming technique according to the shape of spring. In this study, to find the optimal bending method for the motor spring, the FE-simulation was executed using orthogonal array. The design parameters are exposed length, width of vibrate and feed rate. Then, the optimal combination of design parameters was suggested using ANN technique.