저온영역에서 메탈폼에 코팅된 V2O5-Sb2O3/TiO2 SCR 촉매의 NOx 저감성능에 미치는 SO2 영향에 관한 연구

나우진,박영진,방현석,방종성,박해경 한국청정기술학회 2016 청정기술 Vol.22 No.2

상용 발전소에서 LNG를 제외한 대부분의 연료 연소시 SO2의 배출은 필연적이며, 이는 NOx 저감용 SCR촉매의 내구성에 영향을 미치므로 저온영역에서 SO2에 대한 내구성과 NOx 저감 성능이 우수한 SCR촉매 개발을 목적으로 Sb2O3의함침량을 달리하여 metal foam 지지체에 코팅하여 촉매를 제조하였다. 실험실 규모의 상압반응기를 이용하여 NOx 저감 성능 시험을 수행하였고, 제조된 촉매의 특성은 Porosimeter, BET, SEM (scanning electron microscope), EDX (energy dispersive X-ray spectrometer), XPS (X-ray photoelectron spectroscopy) 기기를 이용하여 분석하였다. 촉매의 특성분석결과 비표면적은 Sb2O3의 함침량에 따라 증가하였고, NOx 전환활성 효율은 Sb2O3를 2 wt% 함침한 촉매가 가장 우수한것으로 측정되었다. 또한 Sb2O3를 첨가한 촉매는 SO2에 장시간 노출 시켰을 경우에도 NOx 전환활성 효율이 유지되는것으로 나타났고, 활성온도영역과 SO2의 존재 유무에 따라 Sb2O3 함량을 조절함으로써 효율적인 촉매의 제조가 가능함을 확인할 수 있었다. The emission of SO2 is inevitable in case of combustion of most fossil fuels except LNG in commercial power plant which has a bad effect on the durability of SCR catalyst. To develop a low temperature SCR catalyst which has a high NOx removal performance and excellent durability to SO2, V2O5/TiO2 catalysts were prepared by coating on the metal foam substrate with the impregnation amount of Sb2O3 as promotor. This study has evaluated the NOx removal performance and the durability to SO2 on a laboratory scale atmospheric reactor and analyzed the properties of the prepared catalysts by means of porosimeter, BET, SEM (scanning electron microscope), EDX (energy dispersive x-ray spectrometer), XPS (X-ray photoelectron spectroscopy). It was found that the surface area of catalyst increased with the impregnation amount of Sb2O3 and the NOx removal performance showed the highest value at the 2 wt% impregnation of Sb2O3. This results was considered to be due to the optimum active site on the catalyst surface. And also, Sb2O3 impregnated catalysts presented that NOx removal performance was maintained despite the exposure to SO2 for 5 hours. Therefore it was confirmed that metal foam SCR catalyst for low temperature could be manufactured with the optimum control of Sb2O3 impregnation according to the SO2 presence or not.

고속 채널 환경에서의 효율적인 인덕턴스 추출법에 관한 연구

나우진,이재중,나완수 대한전기학회 2012 대한전기학회 학술대회 논문집 Vol.2012 No.7

폐 RHDS 촉매재생 후 메탈 코로게이트 지지체상에서 워시코팅에 의한 NOx 저감 SCR 촉매에 관한 연구

나우진,차은지,강대환,고영주,조예지,최은영,박해경 한국응용과학기술학회 2020 한국응용과학기술학회지 Vol.37 No.4

The spent RHDS (Residue HydroDeSulfurization) catalyst is deactivated mainly by deposition of various contaminants such as coke, sulfur and vanadium on the surface of catalyst. To eliminate those contaminants, the following remanufacturing process was conducted. The first, heavy oil on the surface of the spent RHDS catalyst was removed by kerosene and dehydrated. The second, the high temperature incineration was carried out to eliminate coke and sulfur components deposited on the surface of spent RHDS catalyst. The third, the excessive quantity of Vanadium deposited on the surface of catalyst was removed by leaching process as follows: ultrasonic agitation was carried out at 50℃, for 10 seconds with 0.5% and 1% oxalic acid solution. The purpose of this process is to find out regenerated RHDS catalyst can be used as SCR catalyst for NOx reduction by controlling the vanadium residual content of the regenerated RHDS catalyst through leaching process. The composition of regenerated RHDS catalyst was analyzed by XRF and the NOx reduction efficiency was also measured by continuous catalytic fixed bed reactor. As the result, regenerated catalyst, with 0.5% oxalic acid, ultrasonic agitation in 10 seconds, showed the most stable NOx reduction efficiency. Also, in comparison with commercial SCR catalyst, the NOx reduction performance of regenerated catalyst was similar to that of commercial SCR catalyst at the temperature 375℃ and higher whereas was lower than commercial SCR catalyst at the temperature range between 200∼250℃. Therefore, it was confirmed that the regenerated catalyst as powder form wash coated on the surface of metal corrugated substrate can be used for commercial SCR catalyst.

저온영역에서 메탈폼에 코팅된 V₂O₅-Sb₂O₃/TiO₂ SCR 촉매의 NOx 저감성능에 미치는 SO₂ 영향에 관한 연구

나우진,박영진,방현석,방종성,박해경,Na, Woo-Jin,Park, Young-Jin,Bang, Hyun-Seok,Bang, Jong-Seong,Park, Hea-Kyung 한국청정기술학회 2016 청정기술 Vol.22 No.2

상용 발전소에서 LNG를 제외한 대부분의 연료 연소시 SO₂의 배출은 필연적이며, 이는 NOx 저감용 SCR촉매의 내구성에 영향을 미치므로 저온영역에서 SO₂에 대한 내구성과 NOx 저감 성능이 우수한 SCR촉매 개발을 목적으로 Sb₂O₃의 함침량을 달리하여 metal foam 지지체에 코팅하여 촉매를 제조하였다. 실험실 규모의 상압반응기를 이용하여 NOx 저감 성능 시험을 수행하였고, 제조된 촉매의 특성은 Porosimeter, BET, SEM (scanning electron microscope), EDX (energy dispersive X-ray spectrometer), XPS (X-ray photoelectron spectroscopy) 기기를 이용하여 분석하였다. 촉매의 특성분석결과 비표면적은 Sb₂O₃의 함침량에 따라 증가하였고, NOx 전환활성 효율은 Sb₂O₃를 2 wt% 함침한 촉매가 가장 우수한 것으로 측정되었다. 또한 Sb₂O₃를 첨가한 촉매는 SO₂에 장시간 노출 시켰을 경우에도 NOx 전환활성 효율이 유지되는 것으로 나타났고, 활성온도영역과 SO₂의 존재 유무에 따라 Sb₂O₃ 함량을 조절함으로써 효율적인 촉매의 제조가 가능함을 확인할 수 있었다. The emission of SO₂ is inevitable in case of combustion of most fossil fuels except LNG in commercial power plant which has a bad effect on the durability of SCR catalyst. To develop a low temperature SCR catalyst which has a high NOx removal performance and excellent durability to SO₂, V₂O₅/TiO₂ catalysts were prepared by coating on the metal foam substrate with the impregnation amount of Sb₂O₃ as promotor. This study has evaluated the NOx removal performance and the durability to SO₂ on a laboratory scale atmospheric reactor and analyzed the properties of the prepared catalysts by means of porosimeter, BET, SEM (scanning electron microscope), EDX (energy dispersive x-ray spectrometer), XPS (X-ray photoelectron spectroscopy). It was found that the surface area of catalyst increased with the impregnation amount of Sb₂O₃ and the NOx removal performance showed the highest value at the 2 wt% impregnation of Sb₂O₃. This results was considered to be due to the optimum active site on the catalyst surface. And also, Sb₂O₃ impregnated catalysts presented that NOx removal performance was maintained despite the exposure to SO₂ for 5 hours. Therefore it was confirmed that metal foam SCR catalyst for low temperature could be manufactured with the optimum control of Sb₂O₃ impregnation according to the SO₂ presence or not.

열병합발전소 적용을 위한 Metal foam SCR촉매의 공간속도와 바인더 함량에 따른 NOx 저감에 관한 연구

나우진(Woo-Jin Na),박해경(Hea-Kyung Park) 한국응용과학기술학회 (구.한국유화학회) 2019 한국응용과학기술학회지 Vol.36 No.1

본 연구에서는 기존 상용 SCR 촉매보다 비표면적, 경량성 및 온도 응답성이 우수한 SCR촉매의 개발을 목적으로 바나듐과 텅스텐의 함량과 바인더의 첨가량을 달리하여 Metal foam 형태의 지지체에 코팅하여 SCR 촉매를 제조한 후, 실험실 규모의 마이크로 상압반응기상에서 공간속도별로 NOx저감 성능을 측정하였다. 촉매의 특성은 Porosimeter, SEM(scanning electron microscope), EDX(energy dispersive x-ray spectrometer) 및 ICP(inductively coupled plasma), 실체현미경(Stereomicroscope) 기기를 이용하여 분석하였다. 연구 결과 NOx 저감 성능은 공간속도가 증가할수록 감소하였고, 바나듐과텅스텐의 함량이 3.5 wt.% 일 때 가장 우수한 것으로 확인하였다. 또한, 바인더 첨가량이 많을수록 NOx 저감 성능이 감소하는 것으로 나타났는데, 이는 촉매 표면상의 활성점 수가 바인더에 의해 점유되어 감소된 것에 따른 것으로 판단된다. 또한 표면 코팅 상태 분석을 통하여 바인더의 첨가량이 적절히 조절 되어야 함을 알 수 있었다. To develop a high performance SCR catalyst which has better specific surface area, lightness of weight and fast temperature response than those of existing commercial SCR catalyst, metal foam type SCR catalysts were prepared by washcoating with vanadium, tungsten and binder. The de-NOx performance test of the prepared catalysts was carried out on atmospheric micro-test unit at lab. scale according to space velocity variation and temperature change, and the characteristics of them were analyzed by Porosimeter, SEM(scanning electron microscope), EDX(energy dispersive x-ray spectrometer), ICP(inductively coupled plasma) and Stereomicroscope. The NOx reduction performance decreased as the space velocity increased and was found to be the best at 3.5 wt.% contents of the vanadium and tungsten. It was found that the larger amount of binder was added, the worse the NOx reduction performance was, which was considered to be that the number of active sites of the prepared catalyst surface was occupied by the binder. We found that the amount of binder to be added to prepare the catalyst should be properly controlled by the condition of coated catalyt surface.

사용 후 SCR촉매 재제조 기술 및 시장현황

나우진 ( Woo Jin Na ),방종성 ( Jong Seong Bang ),박해경 ( Hea Kyung Park ) 한국공업화학회 2017 공업화학전망 Vol.20 No.5

화력발전소, 열병합발전소, 보일러, 소결공정, 소각장 등과 같이 화석연료를 사용하는 배출원들은 배연탈질 시스템을 적용하고 있으며, NH3 및 Urea를 환원제로 사용하는 선택적 촉매환원기술이 대표적이다. 최근 이들 촉매가 수명을 다한 후 대부분 폐기되거나 분쇄 후 유가 금속을 회수하는 단계를 지나, 이를 재제조 하여 자원순환이란 관점에서의 많은 경제적 환경적 이점들을 충족하고 있다. 현장에서 운영되는 모든 탈질시스템은 운전시간에 따라 촉매 비활성화를 수반하므로 본고는 사용 후 SCR촉매의 재제조 기술현황과 전망에 대해 기술하고자 하였다.

저온영역에서 메탈폼에 코팅된 V₂O<SUB>5</SUB>-Sb₂O₃/TiO₂ SCR 촉매의 NOx 저감성능에 미치는 SO₂ 영향에 관한 연구

나우진(Woo-Jin Na),박영진(Young-Jin Park),방현석(Hyun-Seok Bang),방종성(Jong-Seong Bang),박해경(Hea-Kyung Park) 한국청정기술학회 2016 청정기술 Vol.22 No.2

상용 발전소에서 LNG를 제외한 대부분의 연료 연소시 SO₂의 배출은 필연적이며, 이는 NOx 저감용 SCR촉매의 내구성에 영향을 미치므로 저온영역에서 SO₂에 대한 내구성과 NOx 저감 성능이 우수한 SCR촉매 개발을 목적으로 Sb₂O₃의 함침량을 달리하여 metal foam 지지체에 코팅하여 촉매를 제조하였다. 실험실 규모의 상압반응기를 이용하여 NOx 저감 성능 시험을 수행하였고, 제조된 촉매의 특성은 Porosimeter, BET, SEM (scanning electron microscope), EDX (energy dispersive X-ray spectrometer), XPS (X-ray photoelectron spectroscopy) 기기를 이용하여 분석하였다. 촉매의 특성분석결과 비표면적은 Sb₂O₃의 함침량에 따라 증가하였고, NOx 전환활성 효율은 Sb₂O₃를 2 wt% 함침한 촉매가 가장 우수한 것으로 측정되었다. 또한 Sb₂O₃를 첨가한 촉매는 SO₂에 장시간 노출 시켰을 경우에도 NOx 전환활성 효율이 유지되는 것으로 나타났고, 활성온도영역과 SO₂의 존재 유무에 따라 Sb₂O₃ 함량을 조절함으로써 효율적인 촉매의 제조가 가능함을 확인할 수 있었다. The emission of SO₂ is inevitable in case of combustion of most fossil fuels except LNG in commercial power plant which has a bad effect on the durability of SCR catalyst. To develop a low temperature SCR catalyst which has a high NOx removal performance and excellent durability to SO₂, V₂O5/TiO₂ catalysts were prepared by coating on the metal foam substrate with the impregnation amount of Sb₂O₃ as promotor. This study has evaluated the NOx removal performance and the durability to SO₂ on a laboratory scale atmospheric reactor and analyzed the properties of the prepared catalysts by means of porosimeter, BET, SEM (scanning electron microscope), EDX (energy dispersive x-ray spectrometer), XPS (X-ray photoelectron spectroscopy). It was found that the surface area of catalyst increased with the impregnation amount of Sb₂O₃ and the NOx removal performance showed the highest value at the 2 wt% impregnation of Sb₂O₃. This results was considered to be due to the optimum active site on the catalyst surface. And also, Sb₂O₃ impregnated catalysts presented that NOx removal performance was maintained despite the exposure to SO₂ for 5 hours. Therefore it was confirmed that metal foam SCR catalyst for low temperature could be manufactured with the optimum control of Sb₂O₃ impregnation according to the SO₂ presence or not.

폐 RHDM 촉매의 재생 후 워시코팅에 의한 NOx 저감 효율

나우진(Woo-jin Na),박해경(Hea-Kyung Park) 한국유화학회 2018 한국응용과학기술학회지 Vol.35 No.3

폐 RHDM(Residue Hydrodemetallation) 촉매상에 침적된 비활성화 성분인 탄소, 황 을 고온배소 처리하여 제거한 후, 과량 침적되어 있는 바나듐은 초음파 교반기에서 5~15wt% 옥살산 수용액을 이용하여 50℃, 5분 조건하에 바나듐 추출량을 조절함으로써 NOx 저감을 위한SCR(Selective Catalytic Reduction) 촉매로의 적용 가능성을 확인하고자 하였다. 폐촉매와 단계별 처리된 RHDM 촉매를 대상으로 상압반응기상에서 NOx 저감 효율을 측정하였고, 촉매의 성분분석은 ICP, C & S analyzer 및 XRF를 이용하여 분석하였다. 10wt% 옥살산 수용액으로 바나듐을 침출한 촉매가 가장 안정적이었으며 높은 NOx 저감 효율을 보였다. 이를 메탈폼 형태의 지지체에 워시코팅한 촉매는 상용 SCR 촉매와 동등 수준의 NOx 저감 효율을 나타내었다. 따라서 폐 RHDM 촉매의 처리 조건 조정에 관한 후속 연구를 통하여 각 적용처에 적합한 SCR 촉매로의 이용 가능성은 충분할 것으로 사료된다. Utilization of spent RHDM(Residue Hydrodemetallation) catalyst as de-NOx SCR(Selective Catalytic Reduction) catalyst was studied by conducting by heptane cleaning and high-temperature roasting for removal of deposited carbon and sulfur. Followed by oxalic acid leaching was carried out for controlling excess vanadium deposited on spent RHDM catalyst in search of appropriate vanadium loadings for the best SCR performance and the leaching conditions are 5~15wt% concentration of oxalic acid and 5min leaching time at 50℃ with the ultra-sonic agitator. De-NOx activities of prepared and commercial SCR catalyst were measured by the atmospheric SCR catalyst performance test unit, their residual content were also carried out by ICP, C&S Analysis and XRF. Acid leaching (AL-10) catalyst showed the highest de-NOx efficiency of all prepared catalysts and the de-NOx efficiency over wash coated catalyst(WC-AL-10) was equivalent to that of commercial SCR catalyst. Therefore the possibility of using as SCR catalyst for each application by adjusting treatment conditions of spent RHDM catalyst was found and further research will be needed in detail for the its commercialization.

삼출성 중이염에서 RT-Nested PCR 법으로 RS Virus의 검출

전병훈,박재영,나우진,김규찬 인제대학교 1995 仁濟醫學 Vol.16 No.4

유소아 상기도 감염의 가장 중요한 원인이며 삼출성 중이염 환자의 중이 저류액과 비인강에서 가장 많이 검출되는 바이러스인 respiratory syncytial virus(RSV)를 중이 저류액 내에서 검출하기 위하여 약물치료로 호전되지 않는 3-9세의 소아 12례를 대상으로 reverse transcriptase-polymerase chain reaction (RT-PCR)과 nested polymerase chain reaction(nested-PCR) 법을 이용하여 RSV의 염기서열을 검출해 보았다. 그 결과 1례(8.3%)에서만 RSV의 염기서열을 발견할 수 있었으므로 RSV는 삼출성 중이염의 병인으로 작용하는 것으로 생각되며, 삼출성 중이염의 만성화에는 다른 요인들이 관여할 것으로 추정된다. College of Medicine, Inje University, Paik Hospital, Seoul Otitis media with effusion (OME) is the most common cause of acquired hearing loss in childhood. The pathogenesis still remains unclear, though it is closely relaxed to viral upper respiratory infections. It is known that respiratory syncytial virus (RSV) is one of the most common virus isolated from middle ear effusions. The reverse transcriptase-polymerase chain reaction (RT-PCR) and the nested polymerase chain reaction (nested PCR) were used for detection of RSV sequences in middle ear effusions collected from children with intractable OME. These samples were collected from June 1, to December 31, 1994, and the sequences of RSV were detected in 1 of 12 samples tested (8.3%). This observation suggests RSV as a factor in the pathogenesis of OME, but some other factors may be involved in the disease processes of prolonged OME

Poster Ⅱ : Part E : Eukaryotic Gene Expression & Regulation ; Over - production and Biological Activities of E . Coli - derived Recombinant Human Interleukin -6

양영,강형식,나우진,이충은,변광호 한국생화학분자생물학회 (구 한국생화학회) 1991 추계학술대회집 Vol.- No.-