http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
김태형,Kim, Tae-Hyeong 벤처기업협회 2006 벤처다이제스트 Vol.101 No.-
불과 몇 년 전까지도 우리에게 캐나다는 미국의 인접국일 뿐이었다. 하지만 9.11 이후 캐나다는 전 세계적으로 미국을 대체하는 경제권으로 등장했다. 특히 서부 캐나다의 경우, 수많은 아시아권 이민 및 교육 인프라를 통해 아시아권에 가장 친숙한 지역으로 변화하고 있다. 이같이 아시아를 통해 문을 열고 있는 캐나다의 일반산업 세부 현황과 유망진출분야를 공략하는 전략을 모색해본다.
Standard Exact Couch와 6D Robotic Couch를 이용한 광자선의 조사각에 따른 선량 감쇠에 대한 연구
김태형,오세안,예지원,박재원,김성규,Kim, Tae Hyeong,Oh, Se An,Yea, Ji Woon,Park, Jae Won,Kim, Sung Kyu 한국의학물리학회 2016 의학물리 Vol.27 No.2
본 연구는 방사선치료에서 방사선 선량전달의 정확도를 높이기 위해 두 종류의 치료테이블 6D robotic couch (BrainLab, Feldkirchen, Germany)와 Standard exact couch (Varian Exact couch$^{TM}$, Varian Medical Systems, Milpitas, CA, USA)를 이용하여 Rail의 위상(In-Out)에 따른 상대선량을 측정하여, 선량감쇠율을 계산하였다. 치료테이블을 투과하는 조사에너지의 조사각 $0^{\circ}$에서 $360^{\circ}$까지의 상대 선량을 각각 측정하였으며, 조사각이 $0^{\circ}$일 때 측정된 선량을 기준으로 하여 $5^{\circ}$ 간격으로 선량의 변화를 측정하고 선량 감쇠율을 계산하였다. Standard exact couch의 광자선 에너지는 6 MV와 10 MV를 사용하였으며 치료테이블의 Rail 위상(In position, Out position)에 따른 상대 선량을 측정하였다. 6D robotic couch는 6 MV와 15 MV의 광자선 에너지를 사용하였다. Standard exact couch의 광자선의 최대 선량차이는 Rail In position에서 6 MV ($175^{\circ}$), 10 MV ($175^{\circ}$)일 때, 선량차이는 각각 16.53%, 12.42%, Out position에서 6 MV ($225^{\circ}$), 10 MV ($225^{\circ}$)일 때, 선량차이는 각각 15.15%, 9.96%였다. 6D robotic couch에서는 6 MV ($130^{\circ}$)와 15 MV ($130^{\circ}$)일 때, 선량차이는 각각 6.82%, 4.92%였다. 본 연구를 통해, 치료테이블의 종류에 따른 선량 감쇠율은 6D robotic couch가 Standard exact couch보다 6 MV에서 조사각 $180^{\circ}$ 기준 약 1% 더 발생함을 확인하였고, Stnadard exact couch인 경우, Sliding rail의 위상(In position, Out position)에 따라 선량 감쇠가 급격히 변화하는 것을 확인하였다. The objective of this study is to increase the accuracy of dose transmission in radiation therapy using two types of treatment tables, standard exact couch (Varian 21EX, Varian Medical Systems, Milpitas, CA) and 6D robotic couch (Novalis, BrainLAB A.G., Heimstetten, Germany)). We examined the dose attenuation based on the two types of treatment tables and studied the dose of attenuation using the phase (In/Out) for the standard exact couch. We measured the relative dose according to the incident angle of a penetrative photon beam under a treatment table. The incident angle of the photon beam was from $0^{\circ}$ to $360^{\circ}$ in the increments of $5^{\circ}$. The reference angle was set to $0^{\circ}$. Furthermore, the relative dose of the 6D robotic couch was measured using 6 MV and 15 MV, and that of the standard exact couch was measured at the sliding rail position (In-Out) using 6 MV and 10 MV. In the case of the standard exact couch, the measured relative dose was 16.53% (rails at the "In position," $175^{\circ}$, 6 MV), 12.42% (rails at the "In position," $175^{\circ}$, 10 MV), 13.13% (rails at the "Out position," $175^{\circ}$, 6 MV), and 9.96% (rails at the "Out position," $175^{\circ}$, 10 MV). In the case of the 6D robotic couch, the measured relative dose was 6.82% ($130^{\circ}$, 6 MV) and 4.92% ($130^{\circ}$, 15 MV). The photon energies were surveyed at the same incident angle. The dose attenuation for an energy of 10 MV was 4~5% lower than that for 6 MV. This indicated that the higher photon energy, lesser is the attenuation. The results of this study indicated that the attenuation rate for the 6D robotic couch was confirmed to be 1% larger than that for the standard exact couch at 6 MV and $180^{\circ}$. In the case of the standard exact couch, the dose attenuation was found to change rapidly in accordance with the phase ("In position" and "Out position") of the sliding rail.
김태형,윤수문,박성주,Kim, Tae-Hyeong,Yun, Su-Mun,Park, Seong-Ju 대한전자공학회 2000 電子工學會論文誌-SD (Semiconductor and devices) Vol.37 No.4
기존의 March 알고리즘으로는 내장된 메모리의 CMOS ADOFs(Address Decoder Open Faults)를 점검할 수 없다. 번지 생성 순서 및 데이터 생성을 달리 할 수 있다는 자유도(DOF: Degree of Freedom)에 근거한 수정된 March 알고리즘이 제안되었다. 본 논문에서는 번지생성기로 완전 CA(Cellular Automata)를, 데이터 생성기로 Rl-LFSRs(Randomly Inversed LFSRs)을 사용하여 수정된 March 알고리즘을 개선하였다. 본 알고리즘은 기존의 March 알고리즘에서 점검할 수 있었던 SAF, ADF, CF, TF, 및 CMOS ADOF의 완점점검은 물론, NPSFs(Neighborhood Pattern Sensitive Faults)도 추가로 점검할 수 있으며, 알고리즘의 복잡도는 O(n)을 유지한다. The original March algorithms cannot detect CMOS ADOFs(Address Decoder Open Faults) which requires separate deterministic test patterns. Modified March algorithm using DOF(Degree of Freedom) was suggested to detect these faults in addition to conventional stuck faults. This paper augments the modified march test to further capture NPSFs(Neighborhood Pattern Sensitive Faults). Complete CA(Cellular Automata) is used for address generation and Rl-LFSRs(Randomly Inversed LFSRs) for data generation. A new modified March algorithm can detect SAF, CF, TF, CMOS ADOFs, and part of NPSFs. Time complexity of this algorithm is still O(n).
김태형,김병민,최재찬,Kim, Tae-Hyeong,Kim, Byeong-Min,Choi, Jae-Chan 대한기계학회 1996 大韓機械學會論文集A Vol.20 No.10
In cold forming processes, due to high working pressure action on the die surface, failure mechanics must be considered before die design. One of the main reasons of die failure in industrial application of metal forming technologies is wear. Die wear affects the tolerances of formed parts, metal flow and costs of process etc. The only way to control these failures into devlop methods which allow prediction of die wear and which are suited to be used in the design state in order to optimize the process. In this paper, the forming propcesses that involve cold forward extrusion and wire drawing were simulated by rigid plastic finite element method and its output were used for predicting die wear by Archard wear model. The simulation results were compared with the measured worn dies.