http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
스크린 인쇄법에 의한 PZT(52/48) 압전후막의 제조
김태송,김용범,최두진,윤석진,정형진 한국세라믹학회 2001 한국세라믹학회지 Vol.38 No.8
스크린 인쇄법에 의해 Si 기판에 PZT 후막의 제조에 있어서 주요 문제점은 낮은 소결밀도 및 PZT 후막과 Si 기판과의 반응현상이다. 이러한 현상을 억제하기 위해 본 연구에서는 스크린 인쇄법 및 PZT sol-gel 처리법의 혼합된 방법을 채택하여 Pt/TiO$_2$/YSZ/SiO$_2$/Si(100) 기판에 Zr/Ti 비가 52/48인 PZT 후막을 제조하였으며, 소결온도에 따른 잔류분극(P$_{r}$), 유전상수($\varepsilon$$_{r}$) 및 압전상수(d$_{33}$)를 측정하였다. 인쇄된 PZT 후막에 졸 처리함으로써 단순히 인쇄된 후막에 비해 전기적 특성이 증진된 결과를 얻었다.다.
건설공사 시방서의 체계정비방안 연구 ( A Study on the Improvement of the Constuction Specifications Formats )
김태송,진경호,구재동,이영근,조문영 대한건축학회 1998 大韓建築學會論文集 : 構造系 Vol.14 No.8
지금까지 공사계약문서로서 특별(특기)시방서에 표준시방서를 첨부하여 사용하였 으나, 표준시방서 간에 내용이 상호 중복되고 상이하여 적용상에 어려움이 있었 다. 또한 표준시방서가 주로 기술적인 측면에서 개정됨으로 말미암아, 계약문서 로서의 성격이 미흡하였고, 특별(특기)시방서 작성을 위한 시방서 체계의 정립이 미비하였다. 최근 정부에서는 설계도서 작성시 표준시방서의 내용을 발췌·편집·수정·보완 하여 ‘공사시방서’를 작성하도록 규정하였는데, 이러한 시점에서 시방서(표준, 전문, 공사) 작성을 위한 구성체계의 정립 및 작성방법 마련이 필요하게 되었다. 따라서 본 연구에서는 시방서(표준, 전문, 공사) 구성체계 정비방안을 제시하기 위해 시방서 현장적용 실태 설문조사를 실시하여 국내 시방서의 문제점을 파악 하였다. 그리고 외국의 시방서 체계도 조사 분석하여, 시방서 작성방법 개선방안 으로서 전문시방서를 작성하여 사용할 것을 제시하였으며, 시방서(표준, 전문, 공 사) 공통작성방법 및 시방서 종류별 작성방안을 제시하였다.
Rf Magnetron Sputtering 방법에 의하여 제조된 $(BaSr)TiO_3$ 박막의 구조적, 광학적 특성 고찰
김태송,오명환,김종희,Kim, Tae-Song,Oh, Myung-Hwan,Kim, Chong-Hee 한국분석과학회 1993 분석과학 Vol.6 No.2
ITO coated glass, bare glass, 그리고 (100)Si 기판 위에 증착된 $(BaSr)TiO_3$ 박막의 구조는 기판의 종류에 관계없이 변하지 않았으나 결정성은 다결정 ITO층과 (100)Si 기판에 있어서 증대되었다. ITO coated glass 기판 위에 증착된 $(BaSr)TiO_3$ 박막의 조성은 거의 화학양론적으로 일치하였으며 ((Ba+Sr)/Ti=1.08~1.09) 증착 중 상당히 치밀하고 균질하였다. 그러나 증착온도가 증가함에 따라 성장한 박막과 ITO층 사이에, 그리고 ITO층과 base glass 사이에 확산이 보다 심화되었다. ITO coated glass 기판 위에 증착된 $(BaSr)TiO_3$ 박막은 상당히 투명하였으며(투과율 약 80%) 굴절률($n_f$)은 기판온도의 증가에 따라 2.138~2.286이었다. The structure of $(BaSr)TiO_3$ thin film deposited on ITO coated glass, bare glass and (100) Si substrates was not changed, but the crystallinity was improved by the polycrystalline ITO layer and (100) Si substrate. The composition of $(BaSr)TiO_3$ thin film deposited on ITO coated glass was nearly stoichiometric ((Ba+Sr)/Ti=1.08~1.09) and very uniform through all deposition process. But as the deposition temperature increases, the interdiffusion between grown thin film and ITO layer and between ITO layer and base glass is severer. $(BaSr)TiO_3$ thin film deposited on ITO coated glass substrate was highly transparent. The refractive index($n_f$) of $(BaSr)TiO_3$ thin film deposited on ITO coated glass was 2.138~2.286 as a function of substrate temperature.
Ni 상부 층 두께에 대한 Co/Ni 다층 박막의 자화 역전 현상의 의존성에 관한 연구
김태송,류광수,양시훈 한국자기학회 2023 韓國磁氣學會誌 Vol.33 No.3
In this study, the magnetization reversal change according to the change in the thickness of the Ni upper layer was observed in the Co/Ni multilayer thin film, using a magneto-optic Kerr magnetometer capable of measuring the magnetic hysteresis curve and the magnetic viscosity curve while adjusting the direction of the magnetic field. First, as a result of measuring the hysteresis curve, the magnetization reversal of the sample showed a tendency to move the domain wall, and it was found that the magnitude of the coercive force increased as the thickness of the Ni upper layer changed from 7.5 Å to 12.5 Å. In addition, as a result of measuring the magnetic viscosity curve according to the size of the magnetic field, it was found that the magnetization reversal behaviors of all samples were well explained by the thermal activation model, and the thermal activation volume decreased as the thickness of the Ni upper layer increased from 7.5 Å to 12.5 Å.
Rf Magnetron Sputtering 방법으로 제조된 $Ba_{1-x}Sr_xTiO_3$ 박막의 구조적 특성에 대한 연구
김태송,오명환,김종희 한국세라믹학회 1993 한국세라믹학회지 Vol.30 No.6
The Ba1-xSrxTiO3 thin films deposited on ITO-coated glass substrate at 55$0^{\circ}C$ by rf magnetron sputtering method have individual preferential orientations as a function of composition (X=0, 0.25, 0.5, 0.75, 1) due to the stress relief interactions among the intrinsic compressive stress, thermal tensile stress adn extrinsic compressive stress (compressive stress in case of BaTiO3(Tc=12$0^{\circ}C$) and Ba0.75Sr0.25TiO3(Tc=57$^{\circ}C$)). This behavior also appears on the (BaSr)TiO3 thin films (X=0.5) deposited on ITO-coated glass substrate at deposition temperature between 35$0^{\circ}C$ and 55$0^{\circ}C$. The composition of Ba1-xSrxTiO3 thin films deposited on ITO-coated glass substrate at 55$0^{\circ}C$ is close to stoichiometry (1.009~1.089 in A/B ratio), but the compositional deviation from a stoichiometry is larger as SrTiO3 is added. The morphology of Ba1-xSrxTiO3 thin films is very similar for over all substrate temperatures, and the roughness due to the differences of cluster size is the smallest at X=0.25.
김태송,강석희,권영국,윤서현,남기우 한국산업융합학회 2022 한국산업융합학회 논문집 Vol.25 No.6
The leaf spring for a truck absorbs shocks or vibrations from the road surface while driving with the elastic force of the material and prevents the shock from being transmitted to the vehicle body. It is subjected to cyclic stress, and fatigue fracture occurs frequently. This study analyzes fractured leaf spring from a 25 ton truck that has been operating for about a year. In the fractured portion, which is the origin of crack, inclusions were observed, and fatigue failure was caused by cyclic stress. In the stress calculation and FE analysis, the stress at the center of the leaf spring was obtained to be 54∼65% of the yield strength of the base material and damaged material. It is most important to prevent the mixing of impurities in the steel manufacturing for leaf springs. The large stress portion of the leaf spring needs to introduce compressive residual stress by peening etc.
증착방법에 따른 $NO_x$가스 감지용 $WO_3$박막센서의 특성 변화 연구
김태송,김용범,유광수,성기숙,정형진 한국세라믹학회 1997 한국세라믹학회지 Vol.34 No.4
In order to apply WO3 thin films to the semiconducting NOx gas sensors as a sensing material, which have been expected to show good electrical properties, such as large sensitivity, rapid responsibility, and high selectivity, the fabrication method and their sensing characteristics were studied. The variations of surface morphologies, crystallographic orientations and crystallinity with the WO3 thin film growing methods thermal evaporation and DC sputtering methods were investigated by using scanning electron microscopy (SEM) and X-ray diffraction(XRD) analysis. As a result of sensitivity (Rgas/Rair) measurements for the 5 ppm NO2 test gas, the sensitivity values were 113 for the sputtered films and 93 for the evaporated films. It was also observed that the recovery rate of a sensing signal after measuring sensitivity was faster in the sputtered films than in the evaporated films.