http://chineseinput.net/에서 pinyin(병음)방식으로 중국어를 변환할 수 있습니다.
변환된 중국어를 복사하여 사용하시면 됩니다.
해안지형 모니터링을 위한 해상모바일라이다 지형 측정 시스템 구축
김창환,김현욱,강길모,김기영,김원혁,박찬홍,도종대,이명훈,최순영,박현영,Kim, ChangHwan,Kim, HyunWook,Kang, GilMo,Kim, GiYoung,Kim, WonHyuck,Park, ChanHong,Do, JongDae,Lee, MyoungHoon,Choi, SoonYoung,Park, HyeonYeong 대한자원환경지질학회 2016 자원환경지질 Vol.49 No.4
해안지역은 레저공간, 요양, 항만 및 발전소 건설 등으로 인간의 활용이 용이한 공간으로써 그 이용이 점점 늘어나고 있다. 해안은 해양과 육지가 서로 만나며 지속적으로 변화하는 지역이다. 이렇듯 활발한 변동이 일어나고 있는 해안지형에 대한 정기적인 해안침식 모니터링이 필요하지만, 지상라이다(LiDAR : Light Detection and Ranging) 측량방법은 많은 시간 소요와 제약사항들이 있다. 이에 대한 보완책으로 한국해양과학기술원에서는 효율적인 해안지형 측량을 위한 해상모바일라이다 시스템을 구축하였다. 본 시스템은 선박에 지상라이다(RIEGL LMS-420i), 모션센서(MAGUS Inertial+)와 RTKGNSS(LEICA GS15 GS25)를 함께 고정 설치하여 해안선을 따라 선박을 운항하며 일정한 방향(해안 방향)으로 스캔하면서 탐사한다. 지상라이다로는 침식이 진행된 해안을 측량시, 해안침식에서 중요한 전빈지역에 음영대가 많이 발생하여 관측에 어려움이 있다. 하지만 이 해상모바일라이다 시스템을 활용하면 음영대를 효과적으로 관측할 수 있으며, 선박이 해안선을 따라 이동하며 연속측량 할 수 있어, 비교적 짧은 시간에 넓은 지역을 효율적으로 관측할 수 있다. 본 시스템을 이용하여 강릉항 주변 안목 송정해변에 대하여 실험 측량을 실시하고 검토하였다. 이와 같은 효율적인 시스템 이용하여 침식피해가 심각한 해안을 대상으로 효과적인 정밀 측량 모니터링을 실시하고 그 변화 양상을 파악한다면 연안침식대응기술 개발 및 연안침식통합관리체계 도출에 기여를 할 수 있을 것으로 판단된다. Coastal areas, used as human utilization areas like leisure space, medical care, ports and power plants, etc., are regions that are continuously changing and interconnected with oceans and land. Regular monitoring of coastal changes is essential at key locations with such volatility. But the survey method of terrestial LiDAR(Light Detection and Ranging) system has much time consuming and many restrictions. For effective monitoring coastal changes, KIOST(Korea Institute of Ocean Science & Technology) has constructed a shipborne mobile LiDAR system. The shipborne mobile LiDAR system, installed in a research vessel, comprised a land based LiDAR(RIEGL LMS-420i), an IMU(MAGUS Inertial+), a RTKGNSS(LEICA GS15 GS25), and a fixed platform. The shipborne mobile LiDAR system is much more effective than a land based LiDAR system in the measuring of fore shore areas without shadow zone. Because the vessel with the shipborne mobile LiDAR system is continuously moved along the shoreline, it is possible to efficiently survey a large area in a relatively short time. We conducted test measurements in the Anmok-Songjung beach around the Gangneung port. Effective monitoring of the changes using the constructed shipborne mobile LiDAR system for seriously eroded coastal areas will be able to contribute to coastal erosion management and response.
염영진(Youngjin Yum),손진혁(Jinhyug Son),김원혁(Wonhyuck Kim),황정복(Jungbok Hwang),김선웅(Sunung Kim) 대한기계학회 2007 대한기계학회 춘추학술대회 Vol.2007 No.10
An induction hardening technology has been implemented for increasing the strength of press-formed parts locally by high frequency induction heating, thereby eliminating the need for reinforcements. This technique for increasing the tensile strength of sheet steel was practically applied to the front floor cross member and center pillar reinforcement of a passenger car. In order to obtain the behavior of automotive parts, thermal transfer analysis was performed for the hat-shaped specimen under heat treatment process using LS-DYNA. Temperature distribution and deformed shape from the numerical results were in good agreement with the experimental results by high frequency induction heating process. Martensitic transformation was found in the heating zone through microscopic observation which showed higher hardness. Tensile strength and hardness of the hat-shaped boron steel part were found to increase remarkably by high frequency induction heating.
염영진(Youngjin Yum),김종국(Jonggook Kim),이현우(Hyunwoo Lee),황정복(Jungbok Hwang),김선웅(Sunung Kim),김원혁(Wonhyuck Kim),유승조(Seungjo Yoo) 대한기계학회 2008 대한기계학회 춘추학술대회 Vol.2008 No.11
A hot stamping technology of vehicle door impact beam made of thin sheet steel has been developed, with the aim of ensuring occupant safety in a side collision. This technology has been implemented to increase the strength of vehicle body parts and to reduce not only the weight of door impact beam but also the number of work processes. Mechanical tests were performed to obtain material properties of hot-stamped specimen and those were used as input data in stamping and structural simulation for optimal design of door impact beam. Strength of hot-stamped door impact beam increased to the value 102% higher than that of conventional pipe-shaped door impact beam and structural simulation showed that hot-stamped door impact beam achieved 28% weight reduction.
정밀 해저지형 및 해저면 자료를 활용한 동해 남부 연안(울산 일산해변)생태계 서식지 환경 맵핑 연구
최순영(SoonYoung Choi),김창환(ChangHwan Kim),김원혁(WonHyuck Kim),노현수(HyunSoo Rho),박찬홍(ChanHong Park) 대한자원환경지질학회 2021 자원환경지질 Vol.54 No.6
본 연구는 동해 남부 연안의 울산 일산해변에 위치한 선암 주변 해역에 대해 해저지형 및 해저면 환경 자료를 활용하여 서식지환경 주제도 맵핑 방법으로 서식지 환경 특성을 분석하였다. 연구지역의 전체적인 수심은 노출암인 선암부터 수심 약 0 m ~ 23 m범위 내에 분포한다. 선암을 중심으로 서쪽으로는 수심이 얕아지면서 경사가 완만해지고 동쪽으로 가면서 수심이 깊어지며 경사가 급해진다. 동해 대륙주변부에 나타난 우수향 주향이동 단층의 영향으로 선암 주변에 나타나는 해저 암반들의 절개 형태는 주향이동 단층방향과 유사한 주로 N-S 방향을 이루고 있다. 해저지형 자료를 기반으로 해저면 영상과 표층퇴적물 자료를 중첩하고 분석하여 연구지역을 수중암반 지대와 총 3가지 type의 퇴적 지대(역질 사질 퇴적물, 조립한 사질 퇴적층, 세립한 사질 퇴적층)로 분류하였다. 수중암반 지대는 선암 주변과 북쪽 및 남쪽 연안 지대에 주로 분포하지만 선암과 연안 사이의 중간 해역은 암반이 거의 존재하지 않는다. 이 중간 해역은 연안과 외해로 연결되는 해수 이동 통로로서 활발한 퇴적활동이 일어났을 것으로 예상된다. 사질 퇴적물은 연구지역 전체에 넓게 분포하고 있다. 수중영상 및 드론사진 자료로 파악한 선암 최근접 해역 서식지는 주로 자포동물, 완족동물 및 연체동물 등이 우점하여 나타났으며 해수면과 맞닿는 노출암 가장자리 지역에는 다양한 배말 및 담치류 생물이 서식하는 것으로 보여진다. 선암 주변 사질 퇴적물 지대에는 주로 환형동물 및 절지동물이 우점하였으며 연구지역의 해양생물 분포 양상은 해저면 Type, 퇴적물의 조성 및 입도 분포 영향을 많이 받는 것으로 파악된다. 이러한 해저지형, 해저면, 수중영상중첩을통한서식지환경맵핑 분석은해양생태계구조및기능연계연구에많은 기여를할것으로판단된다. We analyzed the characteristics of the habitat environment for the Seonam study area in Ulsan, the southern shore of the East Sea using bathymetry and seafloor environment data. The depth of the study area ranges from about 0 m to 23 m. In the west of the study area, the water depth is shallow with a gentle slope, and the water depth becomes deeper with a steep slope in the east. Due to the right-lateral strike-slip faults located in the continental margin of the East Sea, the fracture surfaces of the seabed rocks are mainly in the N-S direction, which is similar to the direction of the strike faults. Three seafloor types (conglomeratic-grained sandy, coasre-graiend sandy, fine-grained sandy) and rocky bottom area have been classified according to the analyses of the bathymerty, seafloor image, and surface sediment data. The rocky bottom areas are mainly distributed around Seaoam and in the northern and southern coastal area. But the intermediate zone between Seonam and coastal area has no rocky bottom. This intermediate area is expected to have active sedimentation as seawater way. The sandy sediments are widely distributed throughout the study area. Underwater images and UAV images show that Cnidarians, Brachiopods, Mollusks are mostly dominant in the shallow habitat and various Nacellidae, Mytilidae live on the intertidal zone around Seonam. Annelida and Arthropod are dominant in the sandy sediments. The distribution of marine organism in the study area might be greatly influenced by the seafloor type, the composition and particle size distribution of the seafloor sediments. The analysis of habitat environment mapping with bathymetry, seafloor data and underwater images is supposed to contribute to the study of the structure and function of marine ecosystem.